Yeah, plenty of bots, haven't noticed that ever change.

@Obsolesce said in Allow Binaries on Linux to Run on Well Known Privileged Ports:

@Pete-S said in Allow Binaries on Linux to Run on Well Known Privileged Ports:

If you search for net_bind you would assume it would find both these post but it finds nothing.

It seems to only search "words", and that isn't a word or part of a word.

That does seem to be the case. It's not smart at all.

@scottalanmiller said in Windows 2022 Disk Defrag Freezing System:

@Obsolesce said in Windows 2022 Disk Defrag Freezing System:

You should never Defrag SSDs except for very specific reasons.

Which is why it is surprising that in the SSD era, Windows 2022 has it on by default.

Has Microsoft changed how they handle TRIM yet? I know years ago they only ran TRIM when defrag was run. Why? Because Microsoft is still that bad at managing storage.

@Ambarishrh said in MDM for Windows and Mobile Devices | Mobile Device Management?:

@scottalanmiller said in MDM for Windows and Mobile Devices | Mobile Device Management?:

I've got a customer that needs MDM that is able to lock down devices to the point of controlling what websites that they can visit. It's a small user pool, just two corporate devices that will be off network, but we'd like a lot of control on these devices. They are for singular purpose, essentially.

The company has a number of mobile devices that are less important but they'd like MDM for them as well.

Ideally a single solution that allows us to manage everything off network in a single pane of glass is ideal. What options do people know and/or recommend for something like this?

I personally use MS Intune for device management, but please look at Manage Engine MDM and is free for 25 devices https://www.manageengine.com/mobile-device-management/?pos=MEhome&loc=ProdMenu&cat=UEMS

Oh, we use Zoho a lot too. Great tip, free for 25 gets us a LONG way!!

@Pete-S said in Dell Server: The server power action is initiated because the host device initiated a warm-reset operation.:

@scottalanmiller said in Dell Server: The server power action is initiated because the host device initiated a warm-reset operation.:

Just verifying that this log entry tells us that a human hit the power button on the server? This is a log entry in the iDrac.

I don't think so. Warm reset is a reset, like the reset button or alt+ctrl+del.

If you press the power button you get a shutdown / power down but not reset, because after power off it will not start again.

If you have another Dell server available maybe you can verify.

Power button press = Graceful Shutdown
Power button press and hold = Power Off

@Pete-S said in Easy Computer to Computer File Transfer Over Internet:

@VoIP_n00b said in Easy Computer to Computer File Transfer Over Internet:

@Pete-S said in Easy Computer to Computer File Transfer Over Internet:

@VoIP_n00b said in Easy Computer to Computer File Transfer Over Internet:

Reading thought your requirements again SyncThing is perfect for what your looking to do

Synthings goes through community hosted intermediate servers, called relay servers, so it's not direct. https://relays.syncthing.net/

https://docs.syncthing.net/users/relaying.html

Yes, that's exactly what I'm saying.

The normal situation between two residential computers is that a direct connection is never possible because they're both behind NAT or CGNAT.

A direct connection is only possible if you're willing and able to do port forward on either side.

You have no idea what you are saying.

Syncthing has relay enabled by default, yes, but it does not route traffic through it by default.

When you launch syncthing it uses their public STUN server to resolve your local info.

[PGGH6] 2023/03/13 20:20:39 INFO: quic://0.0.0.0:22000 resolved external address quic://209.XXX.XXX.XXX:22000 (via stun.syncthing.net:3478)

Then when you try to connect from a remote, it uses that connection first. It only relays if that listener has closed.

@Pete-S said in ProxMox: Set VM to AutoStart from Command Line CLI Start:

Nice but it's even easier with pure kvm as you don't have to go the roundabout way of using VMid.

virsh autostart somevm

Personally I find the number quite a bit easier.

@dagors said in Configure ZTE F670L for NAT on LAN Ethernet Ports:

This was it. What a dumb way to have that worded!!

Sorry, google translate.
But it's good that it was fixed.

I mean dumb way that ZTE worded it.

We find that if we rename the PC, then allow more than a day to go by before restarting, this can happen.

Also, if we rename a PC, then the user allows the PC to go into Lock mode (screen saver timeout with login required to return) they will encounter this upon wake up/re-logon.

In the above two cases a reboot usually resolves it, when it doesn't, we go in as local admin and disjoin then rejoin the domain to resolve it.

Also, in the above two cases, we did not lose the computer in active directory, so after the disjoin/rejoin you'd want to remove the orphan computer from AD.

There's an article online somewhere about why you should NOT disjoin and rejoin the domain in this case, but we have always done it this way and have never experienced ill effects.

@scottalanmiller said in Bind Linux Process to Well Known Web Ports When Not Root:

If you have ever tried to run a user space program on Linux with a port below 1024 you know that this is a security problem and you are not allowed to do so. There is a simple fix for this, but it is not well known.

Once you know the binary that you will be using to open the low number (well known) port you can use this command to grant it permission to use these ports without otherwise compromising security.

setcap cap_net_bind_service+ep /my/binary/file

Now you can run your application. This is most commonly used for user space web applications that want to use port 80 or 443 without requiring that you run a reverse proxy in front of them.

Good to know!

I found this as an example of how to use it and also commands to remove the permission:
https://cwiki.apache.org/confluence/display/HTTPD/NonRootPortBinding

The setcap utility seems to be available in the libcap2-bin package on debian distros.

I haven't checked if it's installed by default.

@Pete-S said in WordPress Site Lost Its Mind - Ten Minutes of Maintenance Over and Over Again:

This is how you do that:
https://developer.wordpress.org/plugins/cron/hooking-wp-cron-into-the-system-task-scheduler/

Nice, good info. Thanks.

It's an easy fix. Sometimes the directions for the upgrade don't account for the source location of the APT REPO for ProxMox. Check your /etc/apt files and see where your repo is configured. If you are going from Buster to Bullseye for example, make sure that you have this line somewhere and the error should go away...

deb http://download.proxmox.com/debian/pve bullseye pve-no-subscription

@dbeato said in Zoho Federation, Is It Possible?:

I usually would recommend to us the External Channel like people do with Slack
https://help.zoho.com/portal/en/kb/zoho-cliq/cliq-user-guide/channel/how-to-use-channels/articles/how-do-i-invite-users-from-other-organizations-to-join-an-external-channel

With Cliq you can have group chats as well as external channels and I'm assuming it's the same with Slack.

The recommended approach by Zoho is to use group chats for ad-hoc conversations and to use channels for more permanent team communication.

I think support issues and customer conversation belongs to the one-on-one and group chats while long term project collaboration is best served by channels.

That's why I think most a lot of people can work fine without external channels. You don't get external channels in the free tier of Zoho Cliq.

@scottalanmiller It makes sense they can't because of the nature of their static Database.

Thanks, we are up and running again!

@Obsolesce said in GitLab Now Integrates VS Code Into the Browser:

@stacksofplates said in GitLab Now Integrates VS Code Into the Browser:

@Obsolesce said in GitLab Now Integrates VS Code Into the Browser:

not have the typical shitty editor like GitHub has

Huh? GitHub has VSCode as well for an editor now.

It does? When I hit edit, it uses the shitty editor. I don't see an option for VSCode?

Found it, "open in github.dev" does it. I never tried that option, but also it's rare I ever edit in the web browser.

Oh I never did that method. I just hit the period button and it opens.