0_1485979989423_upload-eac96def-3233-451e-94e1-38891c8ca962

@scottalanmiller said in ScreenConnect 6.1 released:

@dafyre said in ScreenConnect 6.1 released:

@scottalanmiller said in ScreenConnect 6.1 released:

@gjacobse said in ScreenConnect 6.1 released:

@gjacobse said in ScreenConnect 6.1 released:

Updating systems - NTG done, and within 5min of update, CPU is at or less then 10%

Tagging @scottalanmiller for his experience on the system

I'm in Italy on a connection that goes down every 30 minutes because of a dead router. No way for me to have useful input to the latency of the US hosted system.

Can't contact the home owner?

And tell them that their Linksys is crap? What'll they do. Fly in from Rome with one?

You should start a revolution on the island with Ubiquiti equipment.

Yeah me for posting shit always.. Just needed this again.

Saw the error and I was like.. hmm I posted about this.

e73ed3df-73d6-4e5b-a0b5-9f55aabbde79-image.png

@JaredBusch said in Unifi AP refusing to upgrade:

@Dashrender said in Unifi AP refusing to upgrade:

@brianlittlejohn said in Unifi AP refusing to upgrade:

Did yall notice that the new update has the ability to export and import individual sites instead of the entire config?

didn't JB post about that a week or so ago?

Nope.

I must have just read it in a released then.

@scottalanmiller said in Resources for ScreenConnect on CentOS 7:

@dafyre said in Resources for ScreenConnect on CentOS 7:

@gjacobse said in Resources for ScreenConnect on CentOS 7:

@scottalanmiller said in Resources for ScreenConnect on CentOS 7:

@JaredBusch said in Resources for ScreenConnect on CentOS 7:

@scottalanmiller said in Resources for ScreenConnect on CentOS 7:

At 2GB, we never see it need it all. It's decently lean.

Been watching things and it seems to need another CPU. Everytime I click on something on the webpage, the CPU spikes to 100%.

I think that we use two.

Since we are having issue with our system

$ sysctl vm.swappiness vm.swappiness = 30

Why not go lower to say... 10 ?

That's what I set them to 😉

Just checked - It's 30...

$ uptime 17:48:06 up 1 day, 3:02, 2 users, load average: 0.00, 0.04, 0.07 $ sysctl vm.swappiness vm.swappiness = 30 ~~

@brianlittlejohn said in Outbound call routing with FreePBX 13:

Is it best to setup a second route for e911 usage?

I always do. Because then I can mark the route as such.

@JaredBusch I see that now. I'm not making plans to make any kind of changes with Asterisk's behavior. I was simply geeking out on the questions of why and how. 🙂

Justy a note, you need to create an OpenCNAM account and fund it if you do not have one.
https://www.opencnam.com/register

I recommend OpenCNAM because it is generally cheaper than your carrier CID charges.
If you recall from the VoIP.ms setup, they charge $0.008 per lookup.
0_1476665080340_upload-bd67743f-2977-48bf-94c6-a40993c0cf1c

OpenCNAM is half that at $0.0039 per lookup. https://www.opencnam.com/pricing

Often sales people and management will ask, "How do I check my voicemail from outside?" I always recommend that they enable voicemail to email, but for those that want it, you can set up a silent option in the IVR.

What I mean by silent option is that you will add another option to the IVR, but you will not announce that option in the recorded audio.

Add another entry and choose the Destination category of Feature Code Admin and then select Dial Voicemail <*98>
0_1476657697065_upload-a36573d5-eb7a-4491-abac-268f2084e8fc

It should be noted, that when you create a new extension, FreePBX will create user conference rooms automatically if you create a new User Manager user at the same time.

0_1485799266380_upload-1d379a1d-151d-4f7d-8a95-d3d5cabd3897

@u2communications said in Setting up a SIP trunk in FreePBX 13:

If you find yourself still trying to get incoming calls working after several hours (like me), be advised that the default DID settings on voip.ms will not work. You merely have to set up a sub-account and make sure to set the authentication type as user/password authentication. Add your DID's to the sub-account and authenticate with the accountnumber_subaccount convention and use the password you created when setting up the sub-account.

I have never experienced an issue using the primary account on VoIP.ms. I highly recommend against it, always. But, I have never had a problem using it.

Also, welcome to ML.

@jaredbusch Nope... I think you're confusing this as you have an account and are logged in. @FATeknollogee pasted a page for new subscribers.

If you follow that link, then select the unlimited plan, you arrive at a new page
The new page allows one to select Local or Toll Free.
Choose Local and your state and proceed to the next page.
Choose your rate center and your page expands to show :
City Per Minute Rate Unlimited Rate
Athens $0.85/month + $0.009/minute $4.25/month + $0.00/minute View Available Numbers +

We're 4 pages in and it doesn't specify this inbound limit.

The last step there, "Networks" is still functionally the same, but the GUI has been updated.
0_1497720411597_26d90ab5-694d-4265-8cdc-3857472d3911-image.png

0_1497720454881_734d9d26-9ecc-47f3-ab3e-e0dbc5ab2657-image.png