What Are You Doing Right Now
-
@EddieJennings said in What Are You Doing Right Now:
On PTO, so I can do my annual recording gig of recording my district's Large Group Performance Evaluation event for middle school bands.
Nice
-
@scottalanmiller said in What Are You Doing Right Now:
@dafyre said in What Are You Doing Right Now:
@Texkonc said in What Are You Doing Right Now:
@jt1001001 said in What Are You Doing Right Now:
So, just found out my lab Dell 2950 server wont support Hyper-V 2016 because it doesn't' have SLAT processors:
"Hyper-V in the vNext version of Windows Server will only work on processors with (SLAT) Secondary Level Address Translation which is also known as (EPT) Extended Page Table for Intel processors. If you have older servers with processors that do not support SLAT, you will need to use Windows Server 2012 R2. This version of Hyper-V does not require SLAT support in the processor."
http://www.nodefinity.net/post/hyper-v-on-poweredge-2900-2950-the-end-of-the-road-is-windows-server-2012-r2Had the same issue with the ML370 G5's that I got. Luckily with a bios update it will support it but will have to buy new procs, but the heat it puts off for my home is nuts.
I bet it's great during the winter! lol.
Not so much in Dallas
I have switched back and forth from heater to AC in the last few weeks multiple times.
Texas has turrets. -
Still sick. Would rather like to work on a project instead of wasting time.
-
@Texkonc said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@dafyre said in What Are You Doing Right Now:
@Texkonc said in What Are You Doing Right Now:
@jt1001001 said in What Are You Doing Right Now:
So, just found out my lab Dell 2950 server wont support Hyper-V 2016 because it doesn't' have SLAT processors:
"Hyper-V in the vNext version of Windows Server will only work on processors with (SLAT) Secondary Level Address Translation which is also known as (EPT) Extended Page Table for Intel processors. If you have older servers with processors that do not support SLAT, you will need to use Windows Server 2012 R2. This version of Hyper-V does not require SLAT support in the processor."
http://www.nodefinity.net/post/hyper-v-on-poweredge-2900-2950-the-end-of-the-road-is-windows-server-2012-r2Had the same issue with the ML370 G5's that I got. Luckily with a bios update it will support it but will have to buy new procs, but the heat it puts off for my home is nuts.
I bet it's great during the winter! lol.
Not so much in Dallas
I have switched back and forth from heater to AC in the last few weeks multiple times.
Texas has turrets. -
@Texkonc said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@dafyre said in What Are You Doing Right Now:
@Texkonc said in What Are You Doing Right Now:
@jt1001001 said in What Are You Doing Right Now:
So, just found out my lab Dell 2950 server wont support Hyper-V 2016 because it doesn't' have SLAT processors:
"Hyper-V in the vNext version of Windows Server will only work on processors with (SLAT) Secondary Level Address Translation which is also known as (EPT) Extended Page Table for Intel processors. If you have older servers with processors that do not support SLAT, you will need to use Windows Server 2012 R2. This version of Hyper-V does not require SLAT support in the processor."
http://www.nodefinity.net/post/hyper-v-on-poweredge-2900-2950-the-end-of-the-road-is-windows-server-2012-r2Had the same issue with the ML370 G5's that I got. Luckily with a bios update it will support it but will have to buy new procs, but the heat it puts off for my home is nuts.
I bet it's great during the winter! lol.
Not so much in Dallas
I have switched back and forth from heater to AC in the last few weeks multiple times.
Texas has turrets.Sounds like it's just that sort of year. I think we had spring, summer, fall, and winter in Ohio here, all in a single week.
-
The Netgear community seems pretty quiet... maybe my questions were too hard.
-
@nadnerB said in What Are You Doing Right Now:
The Netgear community seems pretty quiet... maybe my questions were too hard.
Ask them here! Let's see who gets info first.
-
Setting up yet another website. I seem to be doing that a lot these days.
-
@scottalanmiller said in What Are You Doing Right Now:
@nadnerB said in What Are You Doing Right Now:
The Netgear community seems pretty quiet... maybe my questions were too hard.
Ask them here! Let's see who gets info first.
lol, I gave up and RMA'd the device. Posted it (the device) at lunch.
EDIT: clarity.
-
Yum coffee.
-
@Reid-Cooper said in What Are You Doing Right Now:
Yum coffee.
running late today.. just hit my second cup
-
@nadnerB said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@nadnerB said in What Are You Doing Right Now:
The Netgear community seems pretty quiet... maybe my questions were too hard.
Ask them here! Let's see who gets info first.
lol, I gave up and RMA'd the device. Posted it (the device) at lunch.
EDIT: clarity.
Also, If I'd posted it here, we'd have solved it in half a day (due to time zones) and written enough content to make War and Peace look like a novella.
I felt it would help my cause to RMA if they couldn't solve it.
-
@Texkonc said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@dafyre said in What Are You Doing Right Now:
@Texkonc said in What Are You Doing Right Now:
@jt1001001 said in What Are You Doing Right Now:
So, just found out my lab Dell 2950 server wont support Hyper-V 2016 because it doesn't' have SLAT processors:
"Hyper-V in the vNext version of Windows Server will only work on processors with (SLAT) Secondary Level Address Translation which is also known as (EPT) Extended Page Table for Intel processors. If you have older servers with processors that do not support SLAT, you will need to use Windows Server 2012 R2. This version of Hyper-V does not require SLAT support in the processor."
http://www.nodefinity.net/post/hyper-v-on-poweredge-2900-2950-the-end-of-the-road-is-windows-server-2012-r2Had the same issue with the ML370 G5's that I got. Luckily with a bios update it will support it but will have to buy new procs, but the heat it puts off for my home is nuts.
I bet it's great during the winter! lol.
Not so much in Dallas
I have switched back and forth from heater to AC in the last few weeks multiple times.
Texas has turrets.If you don't like the weather, then wait 5 minutes. It will change.
-
@NerdyDad said in What Are You Doing Right Now:
@Texkonc said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@dafyre said in What Are You Doing Right Now:
@Texkonc said in What Are You Doing Right Now:
@jt1001001 said in What Are You Doing Right Now:
So, just found out my lab Dell 2950 server wont support Hyper-V 2016 because it doesn't' have SLAT processors:
"Hyper-V in the vNext version of Windows Server will only work on processors with (SLAT) Secondary Level Address Translation which is also known as (EPT) Extended Page Table for Intel processors. If you have older servers with processors that do not support SLAT, you will need to use Windows Server 2012 R2. This version of Hyper-V does not require SLAT support in the processor."
http://www.nodefinity.net/post/hyper-v-on-poweredge-2900-2950-the-end-of-the-road-is-windows-server-2012-r2Had the same issue with the ML370 G5's that I got. Luckily with a bios update it will support it but will have to buy new procs, but the heat it puts off for my home is nuts.
I bet it's great during the winter! lol.
Not so much in Dallas
I have switched back and forth from heater to AC in the last few weeks multiple times.
Texas has turrets.If you don't like the weather, then wait 5 minutes. It will change.
That's a Rochester NY statement as well.
-
@DustinB3403 said in What Are You Doing Right Now:
@NerdyDad said in What Are You Doing Right Now:
@Texkonc said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@dafyre said in What Are You Doing Right Now:
@Texkonc said in What Are You Doing Right Now:
@jt1001001 said in What Are You Doing Right Now:
So, just found out my lab Dell 2950 server wont support Hyper-V 2016 because it doesn't' have SLAT processors:
"Hyper-V in the vNext version of Windows Server will only work on processors with (SLAT) Secondary Level Address Translation which is also known as (EPT) Extended Page Table for Intel processors. If you have older servers with processors that do not support SLAT, you will need to use Windows Server 2012 R2. This version of Hyper-V does not require SLAT support in the processor."
http://www.nodefinity.net/post/hyper-v-on-poweredge-2900-2950-the-end-of-the-road-is-windows-server-2012-r2Had the same issue with the ML370 G5's that I got. Luckily with a bios update it will support it but will have to buy new procs, but the heat it puts off for my home is nuts.
I bet it's great during the winter! lol.
Not so much in Dallas
I have switched back and forth from heater to AC in the last few weeks multiple times.
Texas has turrets.If you don't like the weather, then wait 5 minutes. It will change.
That's a Rochester NY statement as well.
I think it's a sentiment pretty much everywhere. People who don't travel much think it's just like that where they live. People who do travel hear it all the time, pretty much everywhere they travel (within the US). I haven't come across it much outside the US, though.
-
@art_of_shred said in What Are You Doing Right Now:
@DustinB3403 said in What Are You Doing Right Now:
@NerdyDad said in What Are You Doing Right Now:
@Texkonc said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@dafyre said in What Are You Doing Right Now:
@Texkonc said in What Are You Doing Right Now:
@jt1001001 said in What Are You Doing Right Now:
So, just found out my lab Dell 2950 server wont support Hyper-V 2016 because it doesn't' have SLAT processors:
"Hyper-V in the vNext version of Windows Server will only work on processors with (SLAT) Secondary Level Address Translation which is also known as (EPT) Extended Page Table for Intel processors. If you have older servers with processors that do not support SLAT, you will need to use Windows Server 2012 R2. This version of Hyper-V does not require SLAT support in the processor."
http://www.nodefinity.net/post/hyper-v-on-poweredge-2900-2950-the-end-of-the-road-is-windows-server-2012-r2Had the same issue with the ML370 G5's that I got. Luckily with a bios update it will support it but will have to buy new procs, but the heat it puts off for my home is nuts.
I bet it's great during the winter! lol.
Not so much in Dallas
I have switched back and forth from heater to AC in the last few weeks multiple times.
Texas has turrets.If you don't like the weather, then wait 5 minutes. It will change.
That's a Rochester NY statement as well.
I think it's a sentiment pretty much everywhere. People who don't travel much think it's just like that where they live. People who do travel hear it all the time, pretty much everywhere they travel (within the US). I haven't come across it much outside the US, though.
It's true. Only LA says the opposite. They make a big deal that they are the opposite.
-
@scottalanmiller said in What Are You Doing Right Now:
@art_of_shred said in What Are You Doing Right Now:
@DustinB3403 said in What Are You Doing Right Now:
@NerdyDad said in What Are You Doing Right Now:
@Texkonc said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@dafyre said in What Are You Doing Right Now:
@Texkonc said in What Are You Doing Right Now:
@jt1001001 said in What Are You Doing Right Now:
So, just found out my lab Dell 2950 server wont support Hyper-V 2016 because it doesn't' have SLAT processors:
"Hyper-V in the vNext version of Windows Server will only work on processors with (SLAT) Secondary Level Address Translation which is also known as (EPT) Extended Page Table for Intel processors. If you have older servers with processors that do not support SLAT, you will need to use Windows Server 2012 R2. This version of Hyper-V does not require SLAT support in the processor."
http://www.nodefinity.net/post/hyper-v-on-poweredge-2900-2950-the-end-of-the-road-is-windows-server-2012-r2Had the same issue with the ML370 G5's that I got. Luckily with a bios update it will support it but will have to buy new procs, but the heat it puts off for my home is nuts.
I bet it's great during the winter! lol.
Not so much in Dallas
I have switched back and forth from heater to AC in the last few weeks multiple times.
Texas has turrets.If you don't like the weather, then wait 5 minutes. It will change.
That's a Rochester NY statement as well.
I think it's a sentiment pretty much everywhere. People who don't travel much think it's just like that where they live. People who do travel hear it all the time, pretty much everywhere they travel (within the US). I haven't come across it much outside the US, though.
It's true. Only LA says the opposite. They make a big deal that they are the opposite.
And Phoenix, and maybe Seattle. There are a few places that are "always the same weather", but everywhere else fits.
-
Weather is just generally a fluctuating thing.
-
winding down for the day under an hour to go before home time
-
Been going from rain to sun and back all day today here.
