What Are You Doing Right Now
-
@DustinB3403 Could be a Roku or smart tv using wifi-direct for the remote. A generic smart tv I have comes up has Hon Hai which is either a foxcon offshoot or the parent company. The Roku comes up as LiteOn I think
-
@jt1001001 said in What Are You Doing Right Now:
@DustinB3403 Could be a Roku or smart tv using wifi-direct for the remote. A generic smart tv I have comes up has Hon Hai which is either a foxcon offshoot or the parent company. The Roku comes up as LiteOn I think
Cool, yeah I was thinking it might be something like that, but this office doesn't have a smarttv etc. My guess is it may be an old Ruckus AP, or that someone brought something else in within the past week.
The AP's I setup show as managed and without issue (and they didn't show up when I was setting up these units either).
-
@DustinB3403 said in What Are You Doing Right Now:
@jt1001001 said in What Are You Doing Right Now:
@DustinB3403 Could be a Roku or smart tv using wifi-direct for the remote. A generic smart tv I have comes up has Hon Hai which is either a foxcon offshoot or the parent company. The Roku comes up as LiteOn I think
Cool, yeah I was thinking it might be something like that, but this office doesn't have a smarttv etc. My guess is it may be an old Ruckus AP, or that someone brought something else in within the past week.
The AP's I setup show as managed and without issue (and they didn't show up when I was setting up these units either).
If you have the Mac address of the AP, can you see which IP address it has, and then block that at the router ?
Or look for one IP that's generating more traffic ?
-
@dafyre said in What Are You Doing Right Now:
@DustinB3403 said in What Are You Doing Right Now:
@jt1001001 said in What Are You Doing Right Now:
@DustinB3403 Could be a Roku or smart tv using wifi-direct for the remote. A generic smart tv I have comes up has Hon Hai which is either a foxcon offshoot or the parent company. The Roku comes up as LiteOn I think
Cool, yeah I was thinking it might be something like that, but this office doesn't have a smarttv etc. My guess is it may be an old Ruckus AP, or that someone brought something else in within the past week.
The AP's I setup show as managed and without issue (and they didn't show up when I was setting up these units either).
If you have the Mac address of the AP, can you see which IP address it has, and then block that at the router ?
Or look for one IP that's generating more traffic ?
It doesn't have an IP, I've checked the DHCP server, and the firewall. The switches aren't managed so I can't look here to locate it. eee
-
playing around mremoteng
-
@siringo said in What Are You Doing Right Now:
playing around mremoteng
That one is my Fallback if I don't have MobaXterm handy.
-
@dafyre said in What Are You Doing Right Now:
@siringo said in What Are You Doing Right Now:
playing around mremoteng
That one is my Fallback if I don't have MobaXterm handy.
cool, i'll take a look at mobaxterm
-
@DustinB3403 said in What Are You Doing Right Now:
@dafyre said in What Are You Doing Right Now:
@DustinB3403 said in What Are You Doing Right Now:
@jt1001001 said in What Are You Doing Right Now:
@DustinB3403 Could be a Roku or smart tv using wifi-direct for the remote. A generic smart tv I have comes up has Hon Hai which is either a foxcon offshoot or the parent company. The Roku comes up as LiteOn I think
Cool, yeah I was thinking it might be something like that, but this office doesn't have a smarttv etc. My guess is it may be an old Ruckus AP, or that someone brought something else in within the past week.
The AP's I setup show as managed and without issue (and they didn't show up when I was setting up these units either).
If you have the Mac address of the AP, can you see which IP address it has, and then block that at the router ?
Or look for one IP that's generating more traffic ?
It doesn't have an IP, I've checked the DHCP server, and the firewall. The switches aren't managed so I can't look here to locate it. eee
Oh for crying out loud. Load Advanced IP scanner on a computer on site and scan the network.
-
@siringo said in What Are You Doing Right Now:
@dafyre said in What Are You Doing Right Now:
@siringo said in What Are You Doing Right Now:
playing around mremoteng
That one is my Fallback if I don't have MobaXterm handy.
cool, i'll take a look at mobaxterm
If you want free, Mremoteng is excellent for that.
-
@siringo you may like to invest in one of these, now that your lot are allowed out of the house:
-
@nadnerB said in What Are You Doing Right Now:
@siringo you may like to invest in one of these, now that your lot are allowed out of the house:
hahaha, bloody collingwood supporter.
-
@travisdh1 said in What Are You Doing Right Now:
@DustinB3403 said in What Are You Doing Right Now:
@dafyre said in What Are You Doing Right Now:
@DustinB3403 said in What Are You Doing Right Now:
@jt1001001 said in What Are You Doing Right Now:
@DustinB3403 Could be a Roku or smart tv using wifi-direct for the remote. A generic smart tv I have comes up has Hon Hai which is either a foxcon offshoot or the parent company. The Roku comes up as LiteOn I think
Cool, yeah I was thinking it might be something like that, but this office doesn't have a smarttv etc. My guess is it may be an old Ruckus AP, or that someone brought something else in within the past week.
The AP's I setup show as managed and without issue (and they didn't show up when I was setting up these units either).
If you have the Mac address of the AP, can you see which IP address it has, and then block that at the router ?
Or look for one IP that's generating more traffic ?
It doesn't have an IP, I've checked the DHCP server, and the firewall. The switches aren't managed so I can't look here to locate it. eee
Oh for crying out loud. Load Advanced IP scanner on a computer on site and scan the network.
Already tried this, again it's broadcasting, bit without an IP address.
-
@DustinB3403 said in What Are You Doing Right Now:
@travisdh1 said in What Are You Doing Right Now:
@DustinB3403 said in What Are You Doing Right Now:
@dafyre said in What Are You Doing Right Now:
@DustinB3403 said in What Are You Doing Right Now:
@jt1001001 said in What Are You Doing Right Now:
@DustinB3403 Could be a Roku or smart tv using wifi-direct for the remote. A generic smart tv I have comes up has Hon Hai which is either a foxcon offshoot or the parent company. The Roku comes up as LiteOn I think
Cool, yeah I was thinking it might be something like that, but this office doesn't have a smarttv etc. My guess is it may be an old Ruckus AP, or that someone brought something else in within the past week.
The AP's I setup show as managed and without issue (and they didn't show up when I was setting up these units either).
If you have the Mac address of the AP, can you see which IP address it has, and then block that at the router ?
Or look for one IP that's generating more traffic ?
It doesn't have an IP, I've checked the DHCP server, and the firewall. The switches aren't managed so I can't look here to locate it. eee
Oh for crying out loud. Load Advanced IP scanner on a computer on site and scan the network.
Already tried this, again it's broadcasting, bit without an IP address.
You'll probably need to go onsite and use Wifi Analyzer or WiFiman to track it down.
-
@travisdh1 said in What Are You Doing Right Now:
@DustinB3403 said in What Are You Doing Right Now:
@travisdh1 said in What Are You Doing Right Now:
@DustinB3403 said in What Are You Doing Right Now:
@dafyre said in What Are You Doing Right Now:
@DustinB3403 said in What Are You Doing Right Now:
@jt1001001 said in What Are You Doing Right Now:
@DustinB3403 Could be a Roku or smart tv using wifi-direct for the remote. A generic smart tv I have comes up has Hon Hai which is either a foxcon offshoot or the parent company. The Roku comes up as LiteOn I think
Cool, yeah I was thinking it might be something like that, but this office doesn't have a smarttv etc. My guess is it may be an old Ruckus AP, or that someone brought something else in within the past week.
The AP's I setup show as managed and without issue (and they didn't show up when I was setting up these units either).
If you have the Mac address of the AP, can you see which IP address it has, and then block that at the router ?
Or look for one IP that's generating more traffic ?
It doesn't have an IP, I've checked the DHCP server, and the firewall. The switches aren't managed so I can't look here to locate it. eee
Oh for crying out loud. Load Advanced IP scanner on a computer on site and scan the network.
Already tried this, again it's broadcasting, bit without an IP address.
You'll probably need to go onsite and use Wifi Analyzer or WiFiman to track it down.
Yeah that is what I'm thinking. I sent the customer a note to see if they were aware of anything else being plugged in recently.
-
@DustinB3403 said in What Are You Doing Right Now:
@travisdh1 said in What Are You Doing Right Now:
@DustinB3403 said in What Are You Doing Right Now:
@travisdh1 said in What Are You Doing Right Now:
@DustinB3403 said in What Are You Doing Right Now:
@dafyre said in What Are You Doing Right Now:
@DustinB3403 said in What Are You Doing Right Now:
@jt1001001 said in What Are You Doing Right Now:
@DustinB3403 Could be a Roku or smart tv using wifi-direct for the remote. A generic smart tv I have comes up has Hon Hai which is either a foxcon offshoot or the parent company. The Roku comes up as LiteOn I think
Cool, yeah I was thinking it might be something like that, but this office doesn't have a smarttv etc. My guess is it may be an old Ruckus AP, or that someone brought something else in within the past week.
The AP's I setup show as managed and without issue (and they didn't show up when I was setting up these units either).
If you have the Mac address of the AP, can you see which IP address it has, and then block that at the router ?
Or look for one IP that's generating more traffic ?
It doesn't have an IP, I've checked the DHCP server, and the firewall. The switches aren't managed so I can't look here to locate it. eee
Oh for crying out loud. Load Advanced IP scanner on a computer on site and scan the network.
Already tried this, again it's broadcasting, bit without an IP address.
You'll probably need to go onsite and use Wifi Analyzer or WiFiman to track it down.
Yeah that is what I'm thinking. I sent the customer a note to see if they were aware of anything else being plugged in recently.
As if they know anything about anything. Just pray you have managed switches for when someone sees a loose network end and plugs it into the same switch the other end is already plugged into. Lost an afternoon of my life tracking that one down, even knowing exactly what had to have happened. -
@travisdh1 said in What Are You Doing Right Now:
@DustinB3403 said in What Are You Doing Right Now:
@travisdh1 said in What Are You Doing Right Now:
@DustinB3403 said in What Are You Doing Right Now:
@travisdh1 said in What Are You Doing Right Now:
@DustinB3403 said in What Are You Doing Right Now:
@dafyre said in What Are You Doing Right Now:
@DustinB3403 said in What Are You Doing Right Now:
@jt1001001 said in What Are You Doing Right Now:
@DustinB3403 Could be a Roku or smart tv using wifi-direct for the remote. A generic smart tv I have comes up has Hon Hai which is either a foxcon offshoot or the parent company. The Roku comes up as LiteOn I think
Cool, yeah I was thinking it might be something like that, but this office doesn't have a smarttv etc. My guess is it may be an old Ruckus AP, or that someone brought something else in within the past week.
The AP's I setup show as managed and without issue (and they didn't show up when I was setting up these units either).
If you have the Mac address of the AP, can you see which IP address it has, and then block that at the router ?
Or look for one IP that's generating more traffic ?
It doesn't have an IP, I've checked the DHCP server, and the firewall. The switches aren't managed so I can't look here to locate it. eee
Oh for crying out loud. Load Advanced IP scanner on a computer on site and scan the network.
Already tried this, again it's broadcasting, bit without an IP address.
You'll probably need to go onsite and use Wifi Analyzer or WiFiman to track it down.
Yeah that is what I'm thinking. I sent the customer a note to see if they were aware of anything else being plugged in recently.
As if they know anything about anything. Just pray you have managed switches for when someone sees a loose network end and plugs it into the same switch the other end is already plugged into. Lost an afternoon of my life tracking that one down, even knowing exactly what had to have happened.Tell me about it...
-
NextCloud 20.0.1 update now.
-
@scottalanmiller said in What Are You Doing Right Now:
NextCloud 20.0.1 update now.
This system was migrated 2 weeks ago from CentOS 7 to Fedora 32. NC 20 has never been offered to it yet.
-
@JaredBusch I stay on the beta channel because the moment I leave it, I never get offered any updates, ever.
-
@scottalanmiller said in What Are You Doing Right Now:
@JaredBusch I stay on the beta channel because the moment I leave it, I never get offered any updates, ever.
You can’t leave it. Or at least that’s what the docs say.
As for the stable channel. They don’t set the next major version as available to the upgrader for a month or more, usually more. Ever.
That said it does consistently update within a version, and eventually to the next version.
