What Are You Doing Right Now
-
So is posting this question a requirement to be a member of SW?
-
@johnhooks Its in the Terms of Service agreement.
-
@johnhooks said:
So is posting this question a requirement to be a member of SW?
At least it's about SSDs and not spinning rust.
-
The real question is why does everyone ask, which is better, RAID 5 or RAID 10.
Regardless of the hardware, RAID 10 is the better option for almost every use case imaginable.
-
@DustinB3403 said:
The real question is why does everyone ask, which is better, RAID 5 or RAID 10.
Regardless of the hardware, RAID 10 is the better option for almost every use case imaginable.
But it doesn't make it the most reasonable solution. With SSD's RAID 5 is perfectly acceptable. If money weren't a factor use RAID 10.
-
@DustinB3403 said:
The real question is why does everyone ask, which is better, RAID 5 or RAID 10.
Regardless of the hardware, RAID 10 is the better option for almost every use case imaginable.
Of course it is not. That is just a silly statement.
RAID5 on SSD is most certainly the best use of the space versus the cost. It is a crazy waste of money with an extremely limited benefit to implement RAID 10 on SSD.
-
@JaredBusch I know, but as I followed up, because I did leave it off, only if money is no factor (which it is always a factor).
RAID 5 SSD is the norm today.
RAID 10 SSD would be extreme, reliable, but extreme. Both in cost and implementation of lost capacity.
-
Has anyone used Ekiga for a softphone?
-
@johnhooks said:
Has anyone used Ekiga for a softphone?
Tried it a LONG time ago. Linphone works great for me.
-
@dafyre said:
At least it's about SSDs and not spinning rust.
Just an FYI, platters cannot rust. They are made of aluminum or glass and ceramic. There is a microscopic layer of a magnetic substance glazed on the top of that base.
-
@JaredBusch said:
@dafyre said:
At least it's about SSDs and not spinning rust.
Just an FYI, platters cannot rust. They are made of aluminum or glass and ceramic. There is a microscopic layer of a magnetic substance glazed on the top of that base.
So the fun adage of "Spinning Rust" isn't true?
Darn.
@scottalanmiller for spreading lies 
-
@scottalanmiller said:
@johnhooks said:
Has anyone used Ekiga for a softphone?
Tried it a LONG time ago. Linphone works great for me.
Ok. I was playing with it and I can't figure out how to dial without typing sip:<number>@<hostname> It's kind of annoying so I'm just going to install Linphone again.
-
@DustinB3403 said:
@JaredBusch said:
@dafyre said:
At least it's about SSDs and not spinning rust.
Just an FYI, platters cannot rust. They are made of aluminum or glass and ceramic. There is a microscopic layer of a magnetic substance glazed on the top of that base.
So the fun adage of "Spinning Rust" isn't true?
Darn.
@scottalanmiller for spreading lies Where have you been? I don't think the platters themselves were ever made out of a material that rusts, just the bit that actually stores data (magnetic material tend to be susceptible to rusting.)
On the other hand, I think someone might have my missing leg somewhere.
-
Curtis is on the job hunt....
-
@travisdh1 I'm not certain if you're serious or not.......
.... -
@RojoLoco said:
Curtis is on the job hunt....
Looks like the printer programming business isn't doing so well.
-
@johnhooks said:
@RojoLoco said:
Curtis is on the job hunt....
Looks like the printer programming business isn't doing so well.
Printer programmers will always be needed. That's one career that is never going away.
-
Hard to believe that the three person office isn't selling enough real estate to keep him employed!
-
No worries, his DJ business will keep him solvent until he finds someone with a complex printing need.
-
@scottalanmiller said:
No worries, his DJ business will keep him solvent until he finds someone with a complex printing need.
That's mean lol.....
He's rolling in that Printer programmer money anyways..... the DJ business is just for beer money.
