What Are You Doing Right Now
-
@johnhooks said:
@MattSpeller said:
Today's issue of BSOD's caused by USB is brought to you by an anonymous Dell assembly technician. The webcam plug was not connected to the port before being stuck down with adhesive leaving about 2mm slack in the cable which folded over, giving just enough room to cause the plug to come partially out of the socket when the lid was jostled.
I have that same set of tools!
They rock - I've destroyed the spudgers now and need replacements. Super pleased with it however, they're supposed to be disposable.
-
@MattSpeller said:
@johnhooks said:
@MattSpeller said:
Today's issue of BSOD's caused by USB is brought to you by an anonymous Dell assembly technician. The webcam plug was not connected to the port before being stuck down with adhesive leaving about 2mm slack in the cable which folded over, giving just enough room to cause the plug to come partially out of the socket when the lid was jostled.
I have that same set of tools!
They rock - I've destroyed the spudgers now and need replacements. Super pleased with it however, they're supposed to be disposable.
I was really surprised at the quality of the tweezers.
-
@johnhooks said:
@MattSpeller said:
@johnhooks said:
@MattSpeller said:
Today's issue of BSOD's caused by USB is brought to you by an anonymous Dell assembly technician. The webcam plug was not connected to the port before being stuck down with adhesive leaving about 2mm slack in the cable which folded over, giving just enough room to cause the plug to come partially out of the socket when the lid was jostled.
I have that same set of tools!
They rock - I've destroyed the spudgers now and need replacements. Super pleased with it however, they're supposed to be disposable.
I was really surprised at the quality of the tweezers.
Agreed, the whole kit is quite good for the money. I recommend it highly to anyone looking for tools.
My favourite bit is absolutely the magnetic screw pad.
-
@art_of_shred said:
@Minion-Queen said:
Just make sure you keep some cheap beer next to you for that.
...and a TV you don't care about.
Better still - use your neighbor's TV.
-
@jenuinecase said:
Just made it to Vermont with the family, staying in a cabin for a few days to celebrate Christmas with everyone.
@ataylor14Doz it haz internet?
-
Searching back to see how @JaredBusch and I (mainly him) modified the config on my ERL... I need to up the limit on the upload side...
cna't find it... but still looking.. that ISO will be long in uploading at this rate.
-
So I went here in Province to visit a cave but goodness, it was raining two days in a row..
-
@gjacobse said:
Searching back to see how @JaredBusch and I (mainly him) modified the config on my ERL... I need to up the limit on the upload side...
cna't find it... but still looking.. that ISO will be long in uploading at this rate.
configure show traffic-policythen assuming I named it VoIP...
set traffic-policy shaper VoIP bandwidth XXmbit -
Just wrapped up my D&D game for the evening.
-
Just watched My Big Fat Greek Wedding with @Dominica
-
We got are second Steam Controller tonight. Hooking it up for the kids tomorrow.
-
@scottalanmiller said:
We got are second Steam Controller tonight. Hooking it up for the kids tomorrow.
I love mine. Been playing with it for several hours in a few games. Steam Big Picture mode still leaves a bit to be desired but overall it is a really functional controller for traditional mouse and keyboard games.
-
- Setting up Brother-In-Law laptop as his Xmas present.
- Doing a document for Management to ask for £17K to install Sophos Firewalls in a few places.
- Wishing I could rewind time to stop the heart hurting so much.
-
@scottalanmiller said:
Just watched My Big Fat Greek Wedding with @Dominica
I saw recently that they are going to do a sequel....
-
@JaredBusch said:
@gjacobse said:
Searching back to see how @JaredBusch and I (mainly him) modified the config on my ERL... I need to up the limit on the upload side...
cna't find it... but still looking.. that ISO will be long in uploading at this rate.
configure show traffic-policythen assuming I named it VoIP...
set traffic-policy shaper VoIP bandwidth XXmbitshaper VoIP { bandwidth 900kbit class 10 { bandwidth 75% burst 15k ceiling 100% description "VoIP RTP Traffic" match RTP { ip { dscp 46Changing it - and then a restart...
-
Happy Wednesday everyone!
-
Foggy here today....
-
This is what happens around here when I am sleeping! And it's only the 16th of the month!
-
Just watched the fog blow out to sea. It was amazing.
-
@gjacobse said:
@JaredBusch said:
@gjacobse said:
Searching back to see how @JaredBusch and I (mainly him) modified the config on my ERL... I need to up the limit on the upload side...
cna't find it... but still looking.. that ISO will be long in uploading at this rate.
configure show traffic-policythen assuming I named it VoIP...
set traffic-policy shaper VoIP bandwidth XXmbitshaper VoIP { bandwidth 900kbit class 10 { bandwidth 75% burst 15k ceiling 100% description "VoIP RTP Traffic" match RTP { ip { dscp 46Changing it - and then a restart...
No, after you use the set you use
committhensaveno need for a restart.
