Installing Snipe-IT on CentOS 7 and MariaDB

scottalanmiller

Trying to turn this into a single command install (assuming UTC time zone like I like to use):

yum -y install wget firewalld; setenforce 0 && yum -y install epel-release; mkdir -p /var/www/html; cd /var/www/html/; wget https://raw.githubusercontent.com/snipe/snipe-it/master/install.sh && chmod 744 install.sh && ./install.sh && cd snipeit; sed -i "s/'timezone' => '',/'timezone' => 'UTC',/" app/config/app.php; php artisan app:install; firewall-cmd --zone=public --add-port=80/tcp --permanent; firewall-cmd --reloadrpm

JaredBusch

@scottalanmiller said:

Trying to turn this into a single command install (assuming UTC time zone like I like to use):

setenforce 0 && mkdir -p /var/www/html; cd /var/www/html/; wget https://raw.githubusercontent.com/snipe/snipe-it/master/install.sh && chmod 744 install.sh && ./install.sh && cd snipeit; sed -i "s/'timezone' => '',/'timezone' => 'UTC',/" app/config/app.php; php artisan app:install

Single line.

scottalanmiller

@JaredBusch said:

@scottalanmiller said:
Trying to turn this into a single command install (assuming UTC time zone like I like to use):
mkdir -p /var/www/html; cd /var/www/html/; wget https://raw.githubusercontent.com/snipe/snipe-it/master/install.sh && chmod 744 install.sh && ./install.sh && cd snipeit; sed -i "s/'timezone' => '',/'timezone' => 'UTC',/" app/config/app.php; php artisan app:install
Single line.

Well you can save it as a file and then it is a single command. Or wrap in it echo $(). Or if you host it and run it via curl, for example.

scottalanmiller

Confirmed working. You can now take a vanilla new install of CentOS 7 and with a single line it will take you to working server. Just follow the on screen prompts and when it is done you can log right into your Snipe-IT system remotely. http://myserver/

Takes about two minutes to build your box, nothing needed beyond that line.

hobbit666

Just tried but I still get no page.

hobbit666

Also might be worth mentioning this site for the time zones
http://php.net/manual/en/timezones.php

scottalanmiller

@hobbit666 said:

Just tried but I still get no page.

Screenshots? Was there any errors during your install?

What is the output of ...

netstat -tulpn

hobbit666

Going to try again with a CentOS7 install with GUI so I can try locally incase its a Firewall/Network issue onto the VM.
Will post screen shots if I still have issues.

scottalanmiller

@hobbit666 said:

Going to try again with a CentOS7 install with GUI so I can try locally incase its a Firewall/Network issue onto the VM.
Will post screen shots if I still have issues.

No need for a GUI to test if the page is up You can look at the local web server via curl or just use netstat to see if it is running.

Even if Snipe-IT fails, HTTPS should be up and there should he something to see.

hobbit666

What's the latest one line command to get this working on a fresh install (minimum iso)?

hobbit666

@scottalanmiller said:

Trying to turn this into a single command install (assuming UTC time zone like I like to use):

setenforce 0 && yum -y install epel-release; mkdir -p /var/www/html; cd /var/www/html/; wget https://raw.githubusercontent.com/snipe/snipe-it/master/install.sh && chmod 744 install.sh && ./install.sh && cd snipeit; sed -i "s/'timezone' => '',/'timezone' => 'UTC',/" app/config/app.php; php artisan app:install

Seems if I use this the PHP stuff doesn't install. but if I go through it line by line and edit the files all seems to work. With the added steps of disabling SELINUX and adding
firewall-cmd --zone=public --add-port=http/tcp --permanent
firewall-cmd --reload

But I have a working SnipIT to play with.

hobbit666

Also one issue is it's installed it to http://name
but when you click Dashboard it tries to go to https://name

scottalanmiller

@hobbit666 said:

Also one issue is it's installed it to http://name
but when you click Dashboard it tries to go to https://name

That's odd. Did not see that happen on our install. We used it a bit for testing.

scottalanmiller

@hobbit666 said:

@scottalanmiller said:
Trying to turn this into a single command install (assuming UTC time zone like I like to use):
setenforce 0 && yum -y install epel-release; mkdir -p /var/www/html; cd /var/www/html/; wget https://raw.githubusercontent.com/snipe/snipe-it/master/install.sh && chmod 744 install.sh && ./install.sh && cd snipeit; sed -i "s/'timezone' => '',/'timezone' => 'UTC',/" app/config/app.php; php artisan app:install
Seems if I use this the PHP stuff doesn't install. but if I go through it line by line and edit the files all seems to work. With the added steps of disabling SELINUX and adding
firewall-cmd --zone=public --add-port=http/tcp --permanent
firewall-cmd --reload

But I have a working SnipIT to play with.

I had the PHP portion repeatedly fail due to a problem with their installer each time that I let their installer do the EPEL. That's why I put the EPEL back in the list. Each time I did it with the EPEL done manually it worked.

I think that because they are doing a custom script rather than a YUM command (it even complains that they are not using YUM) they have some fragility that makes you need to run it over and over again or watch for install errors. This is why people should write RPM packages rather than trying to get all weird and fancy.

Dashrender

I stood up a CentOS 7 and ran Scott's single line install.

It asked me if I wanted to have the system make it's own password, then it asked me to setup a password for the maria DB, then do I want fake data, and allow anonymous user access, and a test db.

Then it asked me again to create a user and to put in fake data and a test db and remove anonymous, etc and ended with this error.

Dashrender

Everything seems to be working pretty well. I'll get some of our data into it this week.

Scott's single line install was pretty nice. I looked over the docker setup, huh.. for someone like me who can barely spell Linux let alone admin it - Docker looks like a pain to configure.

scottalanmiller

@Dashrender said:

Everything seems to be working pretty well. I'll get some of our data into it this week.

Scott's single line install was pretty nice. I looked over the docker setup, huh.. for someone like me who can barely spell Linux let alone admin it - Docker looks like a pain to configure.

Docker is still non-trivial at this point. It's for people moving to DevOps models.

JaredBusch

Can someone provide screen shots of stuff being tracked and such? I do need to get our company assets all tracked someplace. I am always up for something more than a spreadsheet.

JaredBusch

I did look at the online demo they have. It looks nice, but it works like crap on my iPad.

stacksofplates

@scottalanmiller said:

@Dashrender said:

Everything seems to be working pretty well. I'll get some of our data into it this week.

Scott's single line install was pretty nice. I looked over the docker setup, huh.. for someone like me who can barely spell Linux let alone admin it - Docker looks like a pain to configure.

Docker is still non-trivial at this point. It's for people moving to DevOps models.

Ya I agree. If you want to start with containers LXC is easier to get started with IMO. It's not as separated as docker is and you can open a console on the container and use it just like a regular system.