Need some Yaelink Material
-
@jaredbusch said in Need some Yaelink Material:
Oh, and hire me
Don't be like @EddieJennings and throw me aside..
Look. It was a one-time fling. It meant nothing.
-
@eddiejennings said in Need some Yaelink Material:
@jaredbusch said in Need some Yaelink Material:
Oh, and hire me
Don't be like @EddieJennings and throw me aside..
Look. It was a one-time fling. It meant nothing.
/heartbroke
-
@eddiejennings said in Need some Yaelink Material:
@jaredbusch said in Need some Yaelink Material:
Oh, and hire me
Don't be like @EddieJennings and throw me aside..
Look. It was a one-time fling. It meant nothing.
HOw can you do that?
-
LOL Any money wasted on Sangoma, just dont. Get Yealink, it will work with FreePBX and anything else you may decide to look at later.
-
@jaredbusch said in Need some Yaelink Material:
@nerdydad
Basically, when I do cost and feature comparisons between Sangoma and Yealink, Yealink wins hands down.The phones even look almost identical. Likely the hardware is from the same source. The difference is their software. No feature in the Sangoma phones push me to wanting to pay the higher cost.
From a button and feature point of view:
The s705 equates to the T46S
The s400 equates to the T41S
The s405 equates to the T42S
The s205 equates to the T19P E2
The s500 does not have an exact match, it is between the T42S and the T46S.If you are going to go with FreePBX 14, then you only want the S series if you plan to use a LE certificate. I have an outstanding bug report with Yealink on the older G series. The S series is current anyway.
The T29 is a surprisingly good refresh to that T2x series line as well.
If you want to save yourself hours and hours of trial and error I would definitely get @JaredBusch to set it up.
-
Ahem, also I am still stuck with this $800 set from Konftel
It is yours now for... $349 (extra battery , VOIP/DECT adapter, everything) brand new unused.
I have sold almost everything else. Big Bears Voip and Garage Overstock is almost closed... 300wx conference kit +300wx dect base station +300wx extra battery
-
Also, if you want to sell the shoretel system I will buy it, have someone who could use it I think. Just need qty and model numbers, condition each is in...
-
I'll ask my client if they have any need for the conference phone if you still have it.
-
@bigbear said in Need some Yaelink Material:
Also, if you want to sell the shoretel system I will buy it, have someone who could use it I think. Just need qty and model numbers, condition each is in...
I'll ask the boss about it tomorrow. That just might fund the new system.
-
@dashrender said in Need some Yaelink Material:
I'll ask my client if they have any need for the conference phone if you still have it.
My people already said not interested.
good luck with your sale. -
@dashrender said in Need some Yaelink Material:
@dashrender said in Need some Yaelink Material:
I'll ask my client if they have any need for the conference phone if you still have it.
My people already said not interested.
good luck with your sale.Literally bought days before the release of the new Yealink conference phones. Maybe it will become a deskphone I can carry arround the office to start and end meetings.
-
Not specific to Yealink phones, but I just posted this in my chat channel with my supervisor + On High.
@channel Ok folks, the moment you've been waiting for.
Average Windstream bill for 2017: $795.25
Average Windstream bill for 2016: $743.60
November 2017 cost of new phone system: $162.08 (breakdown is below)Vultr phone server hosting: $6.00
Twilio SIP trunking: $105.3245
Numbers toll (39): $39.00
Numbers tollfree (1): $2.00
E911: $1.00
Voip.ms fax number: $1.99
Voip.ms fax usage: $1.0150
CallerID Lookup: $5.7525Total: $162.082 or $162.08
This is for monthly cost. Buying new phones + shipping to external folks was around $3.5k I believe. Your mileage my vary, but these are real numbers.
-
@eddiejennings I believe it. We went from $450+/month down to ~$40.
-
@eddiejennings said in Need some Yaelink Material:
Not specific to Yealink phones, but I just posted this in my chat channel with my supervisor + On High.
@channel Ok folks, the moment you've been waiting for.
Average Windstream bill for 2017: $795.25
Average Windstream bill for 2016: $743.60
November 2017 cost of new phone system: $162.08 (breakdown is below)Vultr phone server hosting: $6.00
Twilio SIP trunking: $105.3245
Numbers toll (39): $39.00
Numbers tollfree (1): $2.00
E911: $1.00
Voip.ms fax number: $1.99
Voip.ms fax usage: $1.0150
CallerID Lookup: $5.7525Total: $162.082 or $162.08
This is for monthly cost. Buying new phones + shipping to external folks was around $3.5k I believe. Your mileage my vary, but these are real numbers.
How did you figure the fax part out? We use fax lightly, except for HR, which is pretty heavy of course. Faxes going in both directions.
-
@nerdydad said in Need some Yaelink Material:
How did you figure the fax part out? We use fax lightly, except for HR, which is pretty heavy of course. Faxes going in both directions.
Faxing was just a part of our Windstream service. I'm not sure what its individual cost was. For the new system, I'm using Voip.ms virutal fax. When I log into Voip.ms, I go to Virtual Fax under DID Numbers, click "My Faxes" and set the date range. At the bottom, it shows the total cost of fax transmission. Also the DID for faxing is $1.99 / month.
-
@eddiejennings said in Need some Yaelink Material:
@nerdydad said in Need some Yaelink Material:
How did you figure the fax part out? We use fax lightly, except for HR, which is pretty heavy of course. Faxes going in both directions.
Faxing was just a part of our Windstream service. I'm not sure what its individual cost was. For the new system, I'm using Voip.ms virutal fax. When I log into Voip.ms, I go to Virtual Fax under DID Numbers, click "My Faxes" and set the date range. At the bottom, it shows the total cost of fax transmission. Also the DID for faxing is $1.99 / month.
Sorry, let me clarify. How did you set it up?
-
@nerdydad said in Need some Yaelink Material:
@eddiejennings said in Need some Yaelink Material:
@nerdydad said in Need some Yaelink Material:
How did you figure the fax part out? We use fax lightly, except for HR, which is pretty heavy of course. Faxes going in both directions.
Faxing was just a part of our Windstream service. I'm not sure what its individual cost was. For the new system, I'm using Voip.ms virutal fax. When I log into Voip.ms, I go to Virtual Fax under DID Numbers, click "My Faxes" and set the date range. At the bottom, it shows the total cost of fax transmission. Also the DID for faxing is $1.99 / month.
Sorry, let me clarify. How did you set it up?
I think this is a fax2email type service, right? Or are you using T.38?
-
@bigbear said in Need some Yaelink Material:
@dashrender said in Need some Yaelink Material:
@dashrender said in Need some Yaelink Material:
I'll ask my client if they have any need for the conference phone if you still have it.
My people already said not interested.
good luck with your sale.Literally bought days before the release of the new Yealink conference phones. Maybe it will become a deskphone I can carry arround the office to start and end meetings.
Well, they have changed their mind.
-
Yeah, it's fax to E-mail.
My fax number with voip.ms is configured to send an E-mail to [email protected], which is a mail-enabled public folder. Users who would normally have access to the fax machine at work have access to the public folder. I've also granted access to our work-from-home folks. In the E-mail to fax section, I've added the E-mail addresses of everyone who should be allowed to send faxes. I also configured a security code. So they have to email [email protected] and the subject is
10DigitRecipientFaxNumber.SecurityCode.System isn't as robust as some you can get, but for what little faxing we do it works. Looks like we has 20 faxes total last month (22 pages). Most inbound. I think the only outbound faxes were my test faxes.
-
@eddiejennings said in Need some Yaelink Material:
Yeah, it's fax to E-mail.
My fax number with voip.ms is configured to send an E-mail to [email protected], which is a mail-enabled public folder. Users who would normally have access to the fax machine at work have access to the public folder. I've also granted access to our work-from-home folks. In the E-mail to fax section, I've added the E-mail addresses of everyone who should be allowed to send faxes. I also configured a security code. So they have to email [email protected] and the subject is
10DigitRecipientFaxNumber.SecurityCode.System isn't as robust as some you can get, but for what little faxing we do it works. Looks like we has 20 faxes total last month (22 pages). Most inbound. I think the only outbound faxes were my test faxes.
So just using for inbound through voip.ms?
My experience is that if there are a few pages these kinds of services work fine. When its 20+ and especially hundreds its near impossible to get things through. Mainly in the medical field.
But still, you used to need a fax server to do fax2email so it is good to know voip.ms is offering this servie.
