Port - PFSense WAN goes offline every Hour
-
@marcinozga Thanks for your reply, i made the change that aaronstuder suggested me. I will post what happens after 1 hour.
-
Unfortunately, the solution (https://doc.pfsense.org/index.php/VirtIO_Driver_Support) that @aaronstuder provided me didnt worked.
-
@c-cruz You might try the Hyper-V instructions.
Can you upgrade to 2.4.X?
-
@dustinb3403 Only if he can do it in under one hour
-
@aaronstuder said in Port - PFSense WAN goes offline every Hour:
@dustinb3403 Only if he can do it in under one hour
This assumes he's not onsite. . .
Which he must be on site because he's changing the settings in PFSense when it goes offline.
-
@dustinb3403 I know, I am just being a smart ass....
-
@aaronstuder said in Port - PFSense WAN goes offline every Hour:
@dustinb3403 I know, I am just being a smart ass....
So was I.
-
@c-cruz
Do you have all offloading settings disabled in System > Advanced > Networking?Hardware Checksum Offloading Hardware TCP Segmentation Offloading Hardware Large Receive Offloading
-
@black3dynamite Thanks for your reply, yes i have all those options disabled
-
@dustinb3403 Is the version 2.4 released?
-
nope. notice the url at the bottom.
-
@jaredbusch Thanks for your reply. My version is the latest one
-
@c-cruz Did you get it figured out?
-
@aaronstuder No yet, i was looking on internet but without luck.
-
@c-cruz I am having a similar issue with a new install
-
@aaronstuder said in Port - PFSense WAN goes offline every Hour:
@c-cruz I am having a similar issue with a new install
Wow. How unlikely is that?
-
Anyone ever figure this out?
-
@aaronstuder said in Port - PFSense WAN goes offline every Hour:
Anyone ever figure this out?
Tried updating to 2.3.5 or to the latest version which is 2.4.2?
When I was using pfSense, I never ran into that issue before. -
@black3dynamite I am on the latest. It's running on KVM so maybe that's the issue.
-
@aaronstuder said in Port - PFSense WAN goes offline every Hour:
@black3dynamite I am on the latest. It's running on KVM so maybe that's the issue.
For device model, are you using virtio, e1000, or rtl8139?