Port - PFSense WAN goes offline every Hour
-
@dustinb3403 On KVM?
-
@aaronstuder said in Port - PFSense WAN goes offline every Hour:
@dustinb3403 On KVM?
It's a cross post, not an issue I'm specifically having.
-
-
@aaronstuder Thanks for your reply. The pfSense appliance is a VM on HyperV.
-
@c-cruz Did you take a look at this?
https://doc.pfsense.org/index.php/Virtualizing_pfSense_under_Hyper-V
-
I ran pfSense on ESXi before and experienced exactly the same behavior. I ended up putting it on bare metal, as no solutions worked. Rebuilding it, including config takes minutes, so I saw no benefits in virtualizing it, only issues.
-
@aaronstuder Thanks for your reply, i made the same steps as the guide. The VM is working and i have full connectivity, but after 1 hour the WAN is down. I made this change as you suggested (https://doc.pfsense.org/index.php/VirtIO_Driver_Support), now i will monitor what will happen after 1 hour.
-
@marcinozga Thanks for your reply, i made the change that aaronstuder suggested me. I will post what happens after 1 hour.
-
Unfortunately, the solution (https://doc.pfsense.org/index.php/VirtIO_Driver_Support) that @aaronstuder provided me didnt worked.
-
@c-cruz You might try the Hyper-V instructions.
Can you upgrade to 2.4.X?
-
@dustinb3403 Only if he can do it in under one hour
-
@aaronstuder said in Port - PFSense WAN goes offline every Hour:
@dustinb3403 Only if he can do it in under one hour
This assumes he's not onsite. . .
Which he must be on site because he's changing the settings in PFSense when it goes offline.
-
@dustinb3403 I know, I am just being a smart ass....
-
@aaronstuder said in Port - PFSense WAN goes offline every Hour:
@dustinb3403 I know, I am just being a smart ass....
So was I.
-
@c-cruz
Do you have all offloading settings disabled in System > Advanced > Networking?Hardware Checksum Offloading Hardware TCP Segmentation Offloading Hardware Large Receive Offloading
-
@black3dynamite Thanks for your reply, yes i have all those options disabled
-
@dustinb3403 Is the version 2.4 released?
-
nope. notice the url at the bottom.
-
@jaredbusch Thanks for your reply. My version is the latest one
-
@c-cruz Did you get it figured out?