What Are You Doing Right Now
-
@SamieWalters said in What Are You Doing Right Now:
Let's just sum it up - its genius (That's 70s Show - and I'm sure the new bedroom)
Actually it's the old bedroom. It's the bedroom that we used from 2010 - 2013. Just haven't been in it in three years.
-
@scottalanmiller said in What Are You Doing Right Now:
@SamieWalters said in What Are You Doing Right Now:
Let's just sum it up - its genius (That's 70s Show - and I'm sure the new bedroom)
Actually it's the old bedroom. It's the bedroom that we used from 2010 - 2013. Just haven't been in it in three years.
I will be doing the same thing soon - switching rooms around. The worst part will be figuring out cable (which I don't use) and the best place for the WiFi extender
-
@SamieWalters said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@SamieWalters said in What Are You Doing Right Now:
Let's just sum it up - its genius (That's 70s Show - and I'm sure the new bedroom)
Actually it's the old bedroom. It's the bedroom that we used from 2010 - 2013. Just haven't been in it in three years.
I will be doing the same thing soon - switching rooms around. The worst part will be figuring out cable (which I don't use) and the best place for the WiFi extender
We wired the house so we have six Ethernet jacks in the new bedroom (only four in the old one.) No need for cable or wifi, it's all GigE Ethernet to every room in the house.
-
@scottalanmiller said in What Are You Doing Right Now:
@SamieWalters said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@SamieWalters said in What Are You Doing Right Now:
Let's just sum it up - its genius (That's 70s Show - and I'm sure the new bedroom)
Actually it's the old bedroom. It's the bedroom that we used from 2010 - 2013. Just haven't been in it in three years.
I will be doing the same thing soon - switching rooms around. The worst part will be figuring out cable (which I don't use) and the best place for the WiFi extender
We wired the house so we have six Ethernet jacks in the new bedroom (only four in the old one.) No need for cable or wifi, it's all GigE Ethernet to every room in the house.
Oh come on - jealous! That's just not fair...
-
@SamieWalters said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@SamieWalters said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@SamieWalters said in What Are You Doing Right Now:
Let's just sum it up - its genius (That's 70s Show - and I'm sure the new bedroom)
Actually it's the old bedroom. It's the bedroom that we used from 2010 - 2013. Just haven't been in it in three years.
I will be doing the same thing soon - switching rooms around. The worst part will be figuring out cable (which I don't use) and the best place for the WiFi extender
We wired the house so we have six Ethernet jacks in the new bedroom (only four in the old one.) No need for cable or wifi, it's all GigE Ethernet to every room in the house.
Oh come on - jealous! That's just not fair...
We have a full cabling plant in a customer built back closet that feed the whole house via the attic. The attic has cabling up on J hooks all over. It's very organized.
-
@scottalanmiller said in What Are You Doing Right Now:
@SamieWalters said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@SamieWalters said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@SamieWalters said in What Are You Doing Right Now:
Let's just sum it up - its genius (That's 70s Show - and I'm sure the new bedroom)
Actually it's the old bedroom. It's the bedroom that we used from 2010 - 2013. Just haven't been in it in three years.
I will be doing the same thing soon - switching rooms around. The worst part will be figuring out cable (which I don't use) and the best place for the WiFi extender
We wired the house so we have six Ethernet jacks in the new bedroom (only four in the old one.) No need for cable or wifi, it's all GigE Ethernet to every room in the house.
Oh come on - jealous! That's just not fair...
We have a full cabling plant in a customer built back closet that feed the whole house via the attic. The attic has cabling up on J hooks all over. It's very organized.
Nice! -
@nadnerB said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@SamieWalters said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@SamieWalters said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@SamieWalters said in What Are You Doing Right Now:
Let's just sum it up - its genius (That's 70s Show - and I'm sure the new bedroom)
Actually it's the old bedroom. It's the bedroom that we used from 2010 - 2013. Just haven't been in it in three years.
I will be doing the same thing soon - switching rooms around. The worst part will be figuring out cable (which I don't use) and the best place for the WiFi extender
We wired the house so we have six Ethernet jacks in the new bedroom (only four in the old one.) No need for cable or wifi, it's all GigE Ethernet to every room in the house.
Oh come on - jealous! That's just not fair...
We have a full cabling plant in a customer built back closet that feed the whole house via the attic. The attic has cabling up on J hooks all over. It's very organized.
Nice!
-
Just finished updating my laptop from Ubuntu 16.04 to 16.10. So far, everything is working fine.
-
About to diagnose a server to seeing the domain so can't RD into it and is showing as unregistered on the Citrix controller
Also thinking about how to word a question for the forum about hardware refresh and finding the "requirements" before spec'ing the refresh i.e. loads/IOPS/etc etc.
-
Testing a different deployment method of an OS with System Center.
Usually use PXE boot but trying user initiated via the Software Center on the PC (with User State Migration).Windows 7 --> 10... <Mario voice> Here we go!
-
@hobbit666 said in What Are You Doing Right Now:
About to diagnose a server to seeing the domain so can't RD into it and is showing as unregistered on the Citrix controller
Simple fix someone had added a 2nd NIC with a different IP with out a gateway so was showing as unknown network type thingy. removed it as wasn't needed anymore (think it was added in nearly days for testing and showing people GP2015) now all working
-
@scottalanmiller said in What Are You Doing Right Now:
@nadnerB said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@SamieWalters said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@SamieWalters said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@SamieWalters said in What Are You Doing Right Now:
Let's just sum it up - its genius (That's 70s Show - and I'm sure the new bedroom)
Actually it's the old bedroom. It's the bedroom that we used from 2010 - 2013. Just haven't been in it in three years.
I will be doing the same thing soon - switching rooms around. The worst part will be figuring out cable (which I don't use) and the best place for the WiFi extender
We wired the house so we have six Ethernet jacks in the new bedroom (only four in the old one.) No need for cable or wifi, it's all GigE Ethernet to every room in the house.
Oh come on - jealous! That's just not fair...
We have a full cabling plant in a customer built back closet that feed the whole house via the attic. The attic has cabling up on J hooks all over. It's very organized.
Nice!That is not "neat"! My OCD wants to come over and organize it. Droopy cables suck.
-
Looks like Tesla is going to be implementing full autonomous vehicles in the very near future. That's really good news! Hopefully they worked out their lane changing/exiting a high way bug.
https://www.tesla.com/blog/all-tesla-cars-being-produced-now-have-full-self-driving-hardware
-
So I think I'm switching from Gitlab to Gogs. It's nice to be able to use a regular directory for a repository. Does anyone else use it? If so, did you use supervisord or just make a systemd service?
-
I just used a systemd service. They even have one linked in the documentation.
-
@stacksofplates said in What Are You Doing Right Now:
I just used a systemd service. They even have one linked in the documentation.
Me too. Gogs is a lot faster than Gitlab to me as well.
-
@coliver said in What Are You Doing Right Now:
Looks like Tesla is going to be implementing full autonomous vehicles in the very near future. That's really good news! Hopefully they worked out their lane changing/exiting a high way bug.
https://www.tesla.com/blog/all-tesla-cars-being-produced-now-have-full-self-driving-hardware
Only one day late on that news
-
@coliver said in What Are You Doing Right Now:
Looks like Tesla is going to be implementing full autonomous vehicles in the very near future. That's really good news! Hopefully they worked out their lane changing/exiting a high way bug.
https://www.tesla.com/blog/all-tesla-cars-being-produced-now-have-full-self-driving-hardware
https://mangolassi.it/topic/11218/tesla-announces-self-driving-cars
-
Waiting to go home
-
Just building a system to customize Raspbian images via a Mint VM and QEMU (qemu-user-static).
Idea behind:
- extend default image
a) (dd if=/dev/null bs=1024 >> raspbian.img)
b) /dev/loopN the raspbian image (losetup)
c) parted resizepart 2 100%
d) resize2fs -p /dev/loopNp2 (<- still required or already done by parted resizepart? need to check that) - chroot
a) prepare chroot (qemu-user-static, mounts, bind-mounts etc)
b) chroot
c) Install software, apply customization
d) exit
e) unmount - flash image to SD card
Benefits:
- No need to flash the image, run it on a Pi, customize it, create a new image etc
- Way faster because I can do this on my workstation with fast SSDs etc
- No need to touch Raspbians first-run jobs like extending the second partition to the SD cards size
Headache reading:
- extend default image
