Ubiquiti Switches
-
@Dashrender said:
@scottalanmiller said:
@Dashrender said:
@Minion-Queen said:
@scottalanmiller said:
@Breffni-Potter said:
VOIP does not work out of the box at all
Really bad call quality issues.VoIP doesn't work with Ubiquiti? We use these all of the time never seen an issue.
Not out of the box it doesn't. We had to set them up to work well.
Oh? what kinds of changes?
Adding in the LAN to WAN route
I thought we were talking about switches.
@Minion-Queen is not, we don't have those switches where she is referring to.
-
@Breffni-Potter said:
Now it's running smooth as anything. I enabled auto VOIP on the switch and that was it.
I don't like auto modes as I don't know what they do
that's weird and concerning. Why would that be needed?
-
@scottalanmiller said:
@Breffni-Potter said:
Now it's running smooth as anything. I enabled auto VOIP on the switch and that was it.
I don't like auto modes as I don't know what they do
that's weird and concerning. Why would that be needed?
My thoughts exactly. Trying to read up on what it does.
-
@Breffni-Potter I think it can auto COS and auto VLAN...
-
@scottalanmiller said:
@Dashrender said:
@scottalanmiller said:
@Dashrender said:
@Minion-Queen said:
@scottalanmiller said:
@Breffni-Potter said:
VOIP does not work out of the box at all
Really bad call quality issues.VoIP doesn't work with Ubiquiti? We use these all of the time never seen an issue.
Not out of the box it doesn't. We had to set them up to work well.
Oh? what kinds of changes?
Adding in the LAN to WAN route
I thought we were talking about switches.
@Minion-Queen is not, we don't have those switches where she is referring to.
We have client with them. And while I didn't do the configuration I remember there needing to be one
-
Orange = 10/100
Green = 1000Why you do this to me?
-
Forgot to say. It's in and done. Will see how it does for a week.
-
Question would you use the EdgeSwitches everywhere? or just at the core of the network.
I need to replace some un-managed dumb switches with managed to deploy some VLAN stuff. But would you use a EdgeSwitch or stick with something like a Netgear L2+ Managed switch (that is more or less same price?)
-
@hobbit666 said:
I need to replace some un-managed dumb switches with managed to deploy some VLAN stuff.
Before you buy new switches.... why are you deploying VLANs?
-
@scottalanmiller Long story
Yes I know the in's and out's of VLAN's.Mainly being used as we were running out of IP's on the 10.0.1.0/24 range thanks to mobile devices and increasing number of employee's. We can't increase the subnet as we already have 10.0.2 10.0.3 etc assigned to other locations, that are connected via MPLS. So it was decided before I started here that the network be split into 3, 10.0.1.X for Management and devices, 172.18.0.X for Guest WiFi, 172.22.0.X for company wifi devices.
So I know it's not the best use of VLAN's but it's the best solution at the moment until I can re-plan and redesign the whole network everywhere.
-
@scottalanmiller said:
@hobbit666 said:
why are you deploying VLANs?I'm not....They are already inplace
-
EdgeSwitches are access switches, not core switches. You would normally not use them at the core, they are for end devices to attach to.
-
@scottalanmiller said:
EdgeSwitches are access switches, not core switches. You would normally not use them at the core, they are for end devices to attach to.
Since they've entered the space I've always wondered why they offer 10 different devices meant for the network edge, but just 2 switches? I guess the switch ecosystem is probably just that much harder to disrupt like they have with the other devices they offer.
-
@travisdh1 probably true.
-
How many SMBs really need a core switch?
While I call the switch that my servers and firewall hang off of the core switch, it really doesn't need to be much if any better than the typical edge switches we talk about around here most often.
Unless I'm missing something?
-
@Dashrender said:
How many SMBs really need a core switch?
Mostly only caused by physical constraints. Size alone would never do it in the SMB. Pure size almost no SMB even leaves the "single stack" world.
-
@scottalanmiller said:
@Dashrender said:
How many SMBs really need a core switch?
Mostly only caused by physical constraints. Size alone would never do it in the SMB. Pure size almost no SMB even leaves the "single stack" world.
wipes brow good, was worried I was missing something completely there
-
We run HP in all customers. Very happy, easy interface and powerful. 1920's are cheap and nice for SMB.
I avoid Netgear, we sold 2 units about 6 years ago in 2 different customers, and network hangs in two each. I decided to leave them. They changed units for another model but a lot of time spent.
TPLink is beginning to work in enterprise line. What do you think about Jetstream line? -
Well ordered my First 2, should be here soon, but had day off today and again Thursday so not sure if i'll be able to play with them
-
@hobbit666 said:
Well ordered my First 2, should be here soon, but had day off today and again Thursday so not sure if i'll be able to play with them
The demo model worked amazingly well, about to order another 3, replace their current hardware for them.
