Just heard MSP say...
-
@DustinB3403 said:
Just as a follow up to this, our existing NAS has had 2 of the 4 drives replaced already, and 1 of them was replaced with a Desktop drive......
Seagate 1TB Desktop 7200 disk....
Who the hell...
How did these people get hired originally? Friend of the owner?
-
@JaredBusch said:
WTF kind of logic makes you think intentionally breaking and rebuilding a RAID5 array 4 times is a good thing?
Sorry should of added the [sarcasm][/sarcasm] tags and some similes (if they were working lol).
As I side note I have done this
on my ReadyNAS with RAIDX replaced all 4 drives from 1TB to 1.5TB allowing rebuild between and it does work, just bum clenching while it rebuilds lol -
@coliver yeah I have no clue.... I had to update my last reply because this unit can't even act as a NAS.
-
@Jason said:
@dafyre said:
@Jason said:
@JaredBusch said:
@hobbit666 said:
I don't see a problem. the logic is fine 10K is faster spinning than 7.2K. cut them some slack!
WTF kind of logic makes you think intentionally breaking and rebuilding a RAID5 array 4 times is a good thing?
If it was a RAID 10.. Maybe. RAID 5 No way in hell is this a good idea.
Even RAID10, to me, that'd be a big maybe.
Yeah I wouldn't do it but chances of failure would be pretty slim compared to RAID 5 especially.
Yes, like pretty significantly different. Still a bad idea, but a different order of magnitude bad idea.
-
@DustinB3403 said:
@coliver yeah I have no clue.... I had to update my last reply because this unit can't even act as a NAS.
That's just called a SAN.
Is it the infamous SC101?
-
It's a Buffalo Terastation something or other model from ~7 years ago.
-
@DustinB3403 said:
It's a Buffalo Terastation something or other model from ~7 years ago.
OH right, that is the one that prompted the other thread about finding the low end pure SAN devices that are out there on the market. Other than the SC101 and Drobo, this was the first of these that we had come across.
-
If you were going to exchange disks for completely different drives (model/speed/etc), they should have recommended moving the data off, destroying the volume, and completely rebuilding it.
-
@BBigford said:
If you were going to exchange disks for completely different drives (model/speed/etc), they should have recommended moving the data off, destroying the volume, and completely rebuilding it.
Even for the same drives... although why would you swap out good identical drives.
-
@scottalanmiller said:
@BBigford said:
If you were going to exchange disks for completely different drives (model/speed/etc), they should have recommended moving the data off, destroying the volume, and completely rebuilding it.
Even for the same drives... although why would you swap out good identical drives.
I wouldn't swap out good identical drives... But if the OP really wanted faster mechanical drives, or SSDs for that matter. I don't see 7200 rpm drives vs. 10k rpm drives being an enormous leap. Now 7200 rpm vs SSD is a different story in performance (dependent on the SSDs used of course), but also a bit more expensive per GB. Nonetheless, I wouldn't be breaking a RAID intentionally without moving all the data off and just rebuilding. I don't see any other reason with how unstable you are making it.
-
Time for new MSP?
-
@scottalanmiller The only time I've traded out drives intentionally when things hadn't failed was a rock bottom budget, we had to expand the storage, and couldn't afford a new appliance right then and there. Traded out one drive at a time for larger drives (backups were taken), and eventually scaled up to about double the size. Bought a different appliance the following year and reused the old appliance as a non-critical.
-
-
@MattSpeller said:
Time for new MSP?
I hope this isn't TekSystem's cause I'm getting ready to contract some remote work to them haha.
-
@Jason you're safe.
-
@Jason said:
@MattSpeller said:
Time for new MSP?
I hope this isn't TekSystem's cause I'm getting ready to contract some remote work to them haha.
I've worked for TekSystems before. Several times over the years. Some good, some bad experiences. Definitely more on the bad side.
-
I originally said about them running a scam that I had to deal with in Albany, but looking through my records I cannot be 100% sure that it was them that ran the scam. So I took out the comment. But I am pretty sure that their Albany team was the one involved. I know the scam thoroughly, but because I didn't put it in my notes who ran it, I don't want to finger them now for certain.
-
Oh wait, I DID find it in my notes. Yes, Teksystems were the scammers. Do not do business with them in any way whatsoever. Avoid them like the plague. Total pieces of garbage.
-
You are aware that Teksystems is not an MSP but a staffing firm, right? The people who Teksystems sends to work for you are random people with whom they have no official association. Those aren't "Teksystems" people, just random people that they hire to work that one job for you.
-
I was interviewed by TekSystems a few years ago. Something seemed off so I called off the interview process.
