Dell PERC Question (Server Down)
-
@BRRABill said:
@MattSpeller said:
If I were buying one today for myself or a "critical duty" I'd get these, no question. Best reviewed ones I can find.
That is some serious USB drive.
I have a feeling a lot of the price is driven by features you wouldn't need for this purpose, though.
Indeed, I'd stick with a good name brand one, tiny thumbnail form factor if that's what floats your boat.
-
I had a thought on this over the weekend, which might help push my decision here.
Since this is a DELL server, will it have any issues running off of non-DELL USB drives?
I mean, you would think it wouldn't matter, but as we have seen, it certainly does not like non-DELL stuff.
I could get the DELL SD reader and two DELL SD cards. But that seems like overkill.
-
@BRRABill said in Dell PERC Question (Server Down):
I had a thought on this over the weekend, which might help push my decision here.
Since this is a DELL server, will it have any issues running off of non-DELL USB drives?
I mean, you would think it wouldn't matter, but as we have seen, it certainly does not like non-DELL stuff.
I could get the DELL SD reader and two DELL SD cards. But that seems like overkill.
I've never even seen a Dell branded USB drive.
-
I mean, you would think it wouldn't matter, but as we have seen, it certainly does not like non-DELL stuff.
I have non-DELL memory and hard dives in my Dell Servers with no issues. I suggest you try it again, with new drives. I even have a same SSD drives you do running in a dell server with no issues.
-
@scottalanmiller said in Dell PERC Question (Server Down):
I've never even seen a Dell branded USB drive.
They sell DELL SD cards with the DELL SD reader.
-
@aaronstuder said in Dell PERC Question (Server Down):
I have non-DELL memory and hard dives in my Dell Servers with no issues. I suggest you try it again, with new drives. I even have a same SSD drives you do running in a dell server with no issues.
These drives are specifically designed to work with the DELL servers as well.
I'll ping @jleskovsky again, maybe he will chime in.
I know this is a newer brand of the SSD everyone has been using from EDGE/xByte.
-
@BRRABill said in Dell PERC Question (Server Down):
@scottalanmiller said in Dell PERC Question (Server Down):
I've never even seen a Dell branded USB drive.
They sell DELL SD cards with the DELL SD reader.
I know that they sell cards, had no idea that they were Dell branded. Dell doesn't make cards, so it is like Dell floppies, just their name slapped on it.
-
Dell doesn't make cards, so it is like Dell floppies, just their name slapped on it.
And hard drives, and memory... Does Dell really "make" anything?
-
@aaronstuder said in Dell PERC Question (Server Down):
Dell doesn't make cards, so it is like Dell floppies, just their name slapped on it.
And hard drives, and memory... Does Dell really "make" anything?
Technically, no. They do the design work for cases and such, everything else is almost always off the shelf parts.
-
@aaronstuder said in Dell PERC Question (Server Down):
Dell doesn't make cards, so it is like Dell floppies, just their name slapped on it.
And hard drives, and memory... Does Dell really "make" anything?
Server chassis, motherboards, some chip sets... they make the servers, like all the server makers. They all do the same things, make the servers, not the plug in parts.
-
@travisdh1 said in Dell PERC Question (Server Down):
Technically, no. They do the design work for cases and such, everything else is almost always off the shelf parts.
HPE especially makes quite a bit of their own stuff. But Dell does, too. If you got a bare server, the only things that are not really Dell are the CPU and the memory, which are interchangeable parts. Computers are complex and made up of tons of components, no one anywhere makes every single thing themselves, especially for servers which are huge. But Dell makes a LOT of stuff.
-
So what was the general consensus here?
OK to boot XenServer off a name brand USB stick?
Or is the DELL server going to throw a fit about that, too?
-
Yes, we all use brand name.
-
@BRRABill said in Dell PERC Question (Server Down):
OK to boot XenServer off a name brand USB stick?
Yes, should work (I'm doing it.)
-
Any name brand stick should be fine.. just stay away from the SW freebies
-
@scottalanmiller said in Dell PERC Question (Server Down):
Yes, we all use brand name.
Continual crashing of non-DELL stuff after being told not to use non-DELL stuff has put the fear of ... DELL ... into me.
-
@BRRABill said in Dell PERC Question (Server Down):
@scottalanmiller said in Dell PERC Question (Server Down):
Yes, we all use brand name.
Continual crashing of non-DELL stuff after being told not to use non-DELL stuff has put the fear of ... DELL ... into me.
Other than non-Dell firmware, what non-Dell stuff has caused an issue?
-
@scottalanmiller said
Other than non-Dell firmware, what non-Dell stuff has caused an issue?
That's it.
Just where all my data is stored. Nothing major. LOL.
-
Well, after talking/debating/learning/arguing via chat with @scottalanmiller about how the server itself had nothing to do with the drives not working because of being non-DELL drives, I decided to reboot the server to refresh the iDrac settings for the drives.
Well, it turns out that when the server came up, the array was in a degraded state again.
I received the same "foreign configuration" error. But when I went into the config utility, it was different than previous times as one of the drives was showing up. And one said "missing" ... normally both of the drives go missing. So I chatted up DELL tech support again.
This time we cleared the foreign config on the drive, because it appeared to be on the "missing" disk. Sure enough, that made the drive appear again, we assigned it as a hot spare, and the array went into rebuilding mode. Before too long there was a fully functional array.
One of the other things I noticed was that the iDRAC was not showing the drives as having any status. Rather, they were a question mark. I asked about this, and the tech said there was a later firmware. (The last tech said there was not.) We updated the iDRAC firmware, and now all the drives are showing up properly.
One strange thing to note: the EDGE drives are showing up with green check marks, which they were not before. Maybe they strong armed the PERC into convincing it they are from DELL.
I know I've been told the iDRAC is out of band and has NOTHING to do with the server, but all of these problems started within 24 hours of enabling the iDRAC on my server. (This array was running for months wth no issues.) And clearly it was having trouble getting the status info of the drives. There is no possible way the two things could be related?
-
Well - I do agree they are separate, apparently this doesn't matter. Like your situation, during a recent iLo upgrade the fans on my server would spin up... hold.. spin down.. etc. I down graded the firmware and that problem went away.
When you were talking to Edge, did they ask you what version of iLo you had?