Dell PERC Question (Server Down)
-
-
Right, using OMSA in the Dom0 should work fine for working with the PERC. Unless I've missed something.
-
@scottalanmiller said in Dell PERC Question (Server Down):
Right, using OMSA in the Dom0 should work fine for working with the PERC. Unless I've missed something.
Yes, but my point was you claimed to use iDRAC.
-
I was going to log into the iDRAC and get a screen there to show the difference, but for some reason it is not pulling an address..
-
You people need to quit making me work!
-
@JaredBusch said in Dell PERC Question (Server Down):
@scottalanmiller said in Dell PERC Question (Server Down):
Do you mean that the OMSA can't manage the PERC?
The iDRAC is not OMSA they are different.
The OMSA was in reference to managing via the Dom0.
-
@JaredBusch said in Dell PERC Question (Server Down):
@scottalanmiller said in Dell PERC Question (Server Down):
Right, using OMSA in the Dom0 should work fine for working with the PERC. Unless I've missed something.
Yes, but my point was you claimed to use iDRAC.
I claimed both, but as two separate means of doing it.
-
That is what I was saying, that the iDRAC is pretty powerless with storage.
I'll work on getting OMSA on the XS.
-
@scottalanmiller said
No, I missed it. How slow was it?
So is somewhat slow speed OK for booting/updating off USB2?
-
@JaredBusch said in Dell PERC Question (Server Down):
You people need to quit making me work!
And after a long drive!
So sorry!
-
@BRRABill said in Dell PERC Question (Server Down):
@scottalanmiller said
No, I missed it. How slow was it?
So is somewhat slow speed OK for booting/updating off USB2?
Sure, what difference does the boot speed make realistically?
-
@BRRABill said in Dell PERC Question (Server Down):
That is what I was saying, that the iDRAC is pretty powerless with storage.
Did my link about that not work?
-
@scottalanmiller said
Sure, what difference does the boot speed make realistically?
I was theorizing ... none.
And the initial update is a PITA, but that's a one time thing.
-
@scottalanmiller said
Did my link about that not work?
Oh ... OK I just took a look.
You do remember you are talking to Mr. GUI, right?
-
@BRRABill said in Dell PERC Question (Server Down):
@scottalanmiller said
Sure, what difference does the boot speed make realistically?
I was theorizing ... none.
And the initial update is a PITA, but that's a one time thing.
If it ads ten minuets or something, sure. That could be a conceivable issue for a lot of systems. That's a ten minute risk. But generally it's like an extra 10 - 60 seconds kind of thing. Hard to have that end up being a risk, especially when we are talking it only coming up during a pretty major event. It's not like an old server without virtualization that would reboot weekly. These tend to stay up for a season.
-
Well, over the weekend I got all the important data off this array, and this morning I TRASHED IT!
I unplugged all the drives, then re-plugged in all DELL-only drives.
The arrays built, initialized, and thus far seem fine.
I guess there is no way to test except actually putting the data back on there, so that will be the next step.
Oh, and prayer.
-
Wish you the best.
-
-
When I plugged the DELL drives in last week, two of the three of them failed.
Today, those same DELL drive, in the same slots, are all working fine.
I wonder if there really was something corrupted in the array because of the other drives. DELL mentioned that as a good possibility ... but is that really possible?
But so far it seems like the PERC and the backplane are working fine.
-
What's the latest on this cluster (pun intended.)
