Dell PowerEdge C2100 with 24 Drive bays
-
@DustinB3403 said:
Should I be more concerned about URE's (etc) on consumer SATA's at this sort of setup?
Depends on the RAID level that you decide to use.
-
Spinning rust, RAID 10 of course.
-
@DustinB3403 said:
Just spitballing the idea's and it was the first device I came across. 3.5 SATA would work as well.
But it is not a viable device, so any information about it is misleading. Only use viable devices, even when spitballing.
-
-
@scottalanmiller said:
@DustinB3403 said:
Just spitballing the idea's and it was the first device I came across. 3.5 SATA would work as well.
But it is not a viable device, so any information about it is misleading. Only use viable devices, even when spitballing.
What makes it non via? I'm assuming you can add a RAID controller?
-
@Dashrender said:
What makes it non via? I'm assuming you can add a RAID controller?
Everything about a C series is designed to be disposable. Everything. Non-redundant parts, cheaper parts. This is literally a disposable node design, like a BackBlaze POD. This is designed exclusively for situations where you have many redundant nodes and you don't care if one or two just die on you.
-
Cheap for a reason. The C stands for Cluster.
-
@scottalanmiller said:
Cheap for a reason. The C stands for Cluster.
As in Cluster F*** I'm guessing then.
-
Ha ha, no not really, but that is a great way to think about it.
-
So really my only choice would be something like a R720XD.
Loaded with 12 6TB SATA drives in RAID 10.
-
@DustinB3403 said:
So really my only choice would be something like a R720XD.
Loaded with 12 6TB SATA drives in RAID 10.
Would you need RAID 10 for this? Maybe RAID 6 would work for this use case?
-
It's a matter of reliability.
Using consumer grade SATA drives RAID10 seems to make more sense, doesn't it?
-
@DustinB3403 said:
So really my only choice would be something like a R720XD.
Loaded with 12 6TB SATA drives in RAID 10.
Why not an R510, much cheaper.
-
Plus moving as much data as we have off weekly the write speed gain would be worth it.
-
@DustinB3403 said:
It's a matter of reliability.
Using consumer grade SATA drives RAID10 seems to make more sense, doesn't it?
Check the price of RE drives in RAID 6. Might be cheaper with 12 drives.
-
Western Digital Red's at 4TB (12 in total) would cost ~$1800.
At RAID 6
-
@DustinB3403 said:
Western Digital Red's at 4TB (12 in total) would cost ~$1800.
At RAID 6
So WD Red (Consumer 5400 RPM) for 24TB is $1800.
-
WD RE (Enterprise) in RAID 6 would be 30TB for $1884.
-
So Red would be just barely cheaper, RE would be just barely larger. Red would be faster for random writes. RE way faster for reads.
-
If you went for smaller WD RE drives (2TB instead of 3TB) you could get 20TB usable for just $1,380.
