Securing SSH

hobbit666

Updated 2nd post

Dashrender

Steps I used to connect to my Zabbix Server (CentOS from Win10

created a folder c:\users<username>.ssh
in powershell ran this command
 ssh-keygen -o -a 100 -t ed25519 -C "[email protected] Desktop"
Typed on the password i wanted to use (you can run a different command to have a password less key - see below)
This generated two files in .ssh - id_ed25519 and id_ed25519.pub

still in powershell i ssh'd onto the zabbix server
ssh <user>@<ip>
Once in ran the following commands
sudo mkdir ~/.ssh
sudo nano ~/.ssh/authorized_keys
copy the contents of the .pub file on the windows machine
sudo chown YourUserName:YourUserName ~/.ssh -R
sudo chmod 700 ~/.ssh
sudo chmod 600 ~/.ssh/authorized_keys
Then from powershell ssh <user>@<ip> and it just asked me for the key password and i'm in

Updated - 28/02/2020

So all of the public keys go into that single authorized_keys file? or does each user on the remote system have their own authorized_keys file?

hobbit666

@Dashrender To be honest that's my next step is now to make some keys for my laptop, and see how and where they go
but my guess is in the same authorized_keys file on a separate line

JaredBusch

@Dashrender said in Securing SSH:

So all of the public keys go into that single authorized_keys file?

It is in the user directory. All of that user's keys are there.

But again, these are public keys.

JaredBusch

@hobbit666 said in Securing SSH:

@Dashrender To be honest that's my next step is now to make some keys for my laptop, and see how and where they go
but my guess is in the same authorized_keys file on a separate line

This is your friend.

ssh-copy-id -i ~/.ssh/id_ed25519.pub user@ip

if you only have a single public key you can simplify it to

ssh-copy-id user@ip

I specify because my desktop has a few different generated keys.

Dashrender

@JaredBusch said in Securing SSH:

@Dashrender said in Securing SSH:

So all of the public keys go into that single authorized_keys file?

It is in the user directory. All of that user's keys are there.

But again, these are public keys.

Yeah, I wasn't worried about a security situation... but I'm guessing by making the keys part of the profile on the end controlled device, that is what sets what user is logged in via the key, since there is no username associated with the key itself.
Just talking this through to myself.

Thanks.

JaredBusch

@Dashrender said in Securing SSH:

@JaredBusch said in Securing SSH:

@Dashrender said in Securing SSH:

So all of the public keys go into that single authorized_keys file?

It is in the user directory. All of that user's keys are there.

But again, these are public keys.

Yeah, I wasn't worried about a security situation... but I'm guessing by making the keys part of the profile on the end controlled device, that is what sets what user is logged in via the key, since there is no username associated with the key itself.
Just talking this through to myself.

Thanks.

The username is specified at login. this has nothing to do with the key.

ssh user@ip

you can easily use this key for root if you like to be unsecure.

ssh root@ip

hobbit666

@JaredBusch said in Securing SSH:

This is your friend.

ssh-copy-id -i ~/.ssh/id_ed25519.pub user@ip

command not found in powershell bu that's a windows problem.

DustinB3403

@hobbit666 said in Securing SSH:

@JaredBusch said in Securing SSH:
This is your friend.
ssh-copy-id -i ~/.ssh/id_ed25519.pub user@ip
command not found in powershell bu that's a windows problem.

That's because windows doesn't have an ssh-copy-id function. You're expected to know to manually copy the file into .ssh

Dashrender

@JaredBusch said in Securing SSH:

@Dashrender said in Securing SSH:

@JaredBusch said in Securing SSH:

@Dashrender said in Securing SSH:

So all of the public keys go into that single authorized_keys file?

It is in the user directory. All of that user's keys are there.

But again, these are public keys.

Yeah, I wasn't worried about a security situation... but I'm guessing by making the keys part of the profile on the end controlled device, that is what sets what user is logged in via the key, since there is no username associated with the key itself.
Just talking this through to myself.

Thanks.

The username is specified at login. this has nothing to do with the key.
ssh user@ip
you can easily use this key for root if you like to be unsecure.
ssh root@ip

Thanks, I stand corrected.

JaredBusch

@DustinB3403 said in Securing SSH:

@hobbit666 said in Securing SSH:
@JaredBusch said in Securing SSH:
This is your friend.
ssh-copy-id -i ~/.ssh/id_ed25519.pub user@ip
command not found in powershell bu that's a windows problem.
That's because windows doesn't have an ssh-copy-id function. You're expected to know to manually copy the file into .ssh

That's his problem for using a shitty OS, not mine.

hobbit666

@JaredBusch :face_with_stuck-out_tongue_winking_eye: :face_with_stuck-out_tongue_winking_eye: :face_with_stuck-out_tongue_closed_eyes: :face_with_stuck-out_tongue_closed_eyes:
I'll try moving to Fedora again at some point.

hobbit666

So, I've done the keys and all is working with my Zabbix and Unifi servers. Not disabled password logins yet (apart from root).

DustinB3403

@hobbit666 said in Securing SSH:

So, I've done the keys and all is working with my Zabbix and Unifi servers. Not disabled password logins yet (apart from root).

If you're keys work, you should disable the password logins.

hobbit666

@DustinB3403 I will once i've played around a bit more with changing other settings for SSH.

DustinB3403

@hobbit666 Don't forget that you can set a password on your keys if you really want to have a more secured access process.

hobbit666

@DustinB3403 I've already got the password on the keys. I've just not disabled password logins in case i kill something and need to get access :). Planning on removing it once i've "SSH Key's" the other servers.

DustinB3403

@hobbit666 said in Securing SSH:

@DustinB3403 I've already got the password on the keys. I've just not disabled password logins in case i kill something and need to get access :). Planning on removing it once i've "SSH Key's" the other servers.

Have you confirmed that key based login works? If so, then you login as user@ip and elevate to root. Disable root login period via ssh and only allow elevation.

pmoncho

@hobbit666 said in Securing SSH:

@DustinB3403 I've already got the password on the keys. I've just not disabled password logins in case i kill something and need to get access :). Planning on removing it once i've "SSH Key's" the other servers.

Don't forget, you can still login as root or a admin user on the console. You are only securing ssh.

If you want to test, login to the console of the server (stay logged in), change your sshd_config, restart sshd process, test logging in with your keys and/or any other testing you want to do. If all is well, log out of the console.

wirestyle22

@JaredBusch said in Securing SSH:

@hobbit666 said in Securing SSH:

@Dashrender To be honest that's my next step is now to make some keys for my laptop, and see how and where they go
but my guess is in the same authorized_keys file on a separate line

This is your friend.
ssh-copy-id -i ~/.ssh/id_ed25519.pub user@ip
if you only have a single public key you can simplify it to
ssh-copy-id user@ip
I specify because my desktop has a few different generated keys.

How does this fit into disaster recovery plans when you have many hundreds of ssh keys and a large IT team? If one person has 100 keys to various servers and their laptop dies, are you guys using a script to copy the keys per user? Also new user creation or deleting keys when someone leaves