CPU Cooler
-
So during a transcode, my CPU goes to 100c. Yikes... I need to find something.
-
@fuznutz04 that's rather hot.
-
-
Right. So I'm thinking either the heat sink may need some new paste and a reseat of the heat sink, or just a new heat sink all together.
-
@fuznutz04 you can clean and apply some new heatsink gel, and would likely be fine. I personally don't like dealing with the gel.
-
Yeah, an i7 should be able to handle that workload. I'm surprised that it's getting so hot. Water cooling might be too much, fixing or just upgrading the conventional cooler is probably fine.
-
@DustinB3403 Yeah, me neither. I wonder if the paste wasn't applied correctly when it was built.
-
@scottalanmiller said in CPU Cooler:
Yeah, an i7 should be able to handle that workload. I'm surprised that it's getting so hot.
Right, the only reason I built the rig with an i7 was because I do a lot of video stuff (both DVD, as well as home movie creation,etc.) The i7s are perfect for that. If it was only going to be a gaming rig, I would have just went with an i5.
I'm going to get some new paste and see if it fixes it first.
-
@fuznutz04 said in CPU Cooler:
@DustinB3403 Yeah, me neither. I wonder if the paste wasn't applied correctly when it was built.
That's very easy to have happened.
-
The Corsair closed loop coolers offer some amazing performance for a very inexpensive price. Definitely something to consider before going to a full water cooling solution.
That being said it really sounds like you need to look at why it's spiking like that, my assumption is that the old paste is used up or the cooler got jostled at some point and there is an air bubble. Get some thermal paste, not the most expensive but also not the cheapest, and reapply.
-
@coliver said in CPU Cooler:
The Corsair closed loop coolers offer some amazing performance for a very inexpensive price. Definitely something to consider before going to a full water cooling solution.
That being said it really sounds like you need to look at why it's spiking like that, my assumption is that the old paste is used up or the cooler got jostled at some point and there is an air bubble. Get some thermal paste, not the most expensive but also not the cheapest, and reapply.
Yeah, I know a few people that speak highly of those units. Mainly they like them because of the low noise.
-
@fuznutz04 said in CPU Cooler:
@coliver said in CPU Cooler:
The Corsair closed loop coolers offer some amazing performance for a very inexpensive price. Definitely something to consider before going to a full water cooling solution.
That being said it really sounds like you need to look at why it's spiking like that, my assumption is that the old paste is used up or the cooler got jostled at some point and there is an air bubble. Get some thermal paste, not the most expensive but also not the cheapest, and reapply.
Yeah, I know a few people that speak highly of those units. Mainly they like them because of the low noise.
Low noise is nice, they also do a remarkable job at cooling.
-
@coliver it's most likely because it's normally a mixture of both water and glycol in those closes loop systems, which is really efficient at exchanging heat.
-
@fuznutz04 Could it just need reseating with some new and better thermal compound?
-
100C is pretty crazy even for stock cooling. Do you have it over-clocked?
-
My laptop has a:
Processor Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz, 2592 Mhz, 4 Core(s), 8 Logical Processor(s)
Installed Physical Memory (RAM) 16.0 GB
Adapter Description NVIDIA GeForce GTX 970M
It's only like a half inch thick and this CPU doesn't even go past like 80c under full load.
-
So some new thermal paste, properly applied, brought the full load temp down to 75-80 c during a video encode. Video encode is about the absolute most taxing thing you can do to a process. Problem solved!
-
Wow I haven't used handbrake since like 2005. I was really committed to converting DVD's for my kids iPod video. Are you converting bluerays?
-
@fuznutz04 said in CPU Cooler:
So some new thermal paste, properly applied, brought the full load temp down to 75-80 c during a video encode. Video encode is about the absolute most taxing thing you can do to a process. Problem solved!
Ta da!
-
@bigbear said in CPU Cooler:
Wow I haven't used handbrake since like 2005. I was really committed to converting DVD's for my kids iPod video. Are you converting bluerays?
No, just my DVDs. We have so many kids DVDs, and I can't stand having all of them go missing or mixed up in different cases. So, on to Plex they go! I use handbrake to reduce file size.
Handbrake is the best. I too have used that tool for years.
