Domain Controller Down (VM)
-
@BRRABill said in Domain Controller Down (VM):
Hence if he is doing a restore of a DC with another working DC in the domain, it could cause even more issues.
Or am I totally wrong here?
There isn't another working DC.
-
@scottalanmiller said in Domain Controller Down (VM):
@BRRABill said in Domain Controller Down (VM):
@JaredBusch said
This does not matter FFS, forget about AD.
He said there is another DC. How does it not matter?
He also said it doesn't work. AD isn't the issue right now.
Well it might work but he has not easy way to know that right now because DHCP is down. If his DHCP server had handed out this DC as a secondary DNS, then things would still be working. Thus why I assume his DHCP is improperly configured. but again. no way to know that until he brings it back online.
-
@scottalanmiller said in Domain Controller Down (VM):
@BRRABill said in Domain Controller Down (VM):
@JaredBusch said
This does not matter FFS, forget about AD.
He said there is another DC. How does it not matter?
He also said it doesn't work. AD isn't the issue right now.
No he said he can't access it.
If, as was mentioned (by @JaredBusch I think) the DNS settings in DHCP were incorrect, that would make sense.
All I was trying to say is that there MIGHT be a working DC on the network still. It's possible the only issue MIGHT be that DNS settings on the client are wrong.
So...
-
In this scenario, if he adds the second DC to his client DNS and it works, that temporarily fixes his issue. He can install DHCP and take his time getting the 2003 server back up.
-
Also in this scenario (if there is a working DC still there) I thought it was verboten to just restore. It has to be restored a certain way.
-
-
@wirestyle22 said in Domain Controller Down (VM):
@scottalanmiller said in Domain Controller Down (VM):
@coliver said in Domain Controller Down (VM):
If you have no backups then
you need to look at DHCP and getting a second/new server set up. Or seeing if your firewall has the ability to hand out addresses that may be the quickest way to do it.management decided that this outage doesn't matter.And I mean this. Stop for a moment, remove the stress. Management has made it totally clear to you, before this happened, that they were not concerned about this outage, right? Don't take on stress that the company doesn't have. If they don't care, why do you? I'm not saying you don't fix it, of course you fix it. But don't stress about it. They knew this was going to happen and being a 2003 machine, they knew it would be soon. They accepted the risk, they accept the consequences. It's as simple as that.
I'm stressed because I honestly do not know how to fix it. I have people calling me literally every 2 minutes for progress updates and I really have nothing to tell them. My job is to know and I don't know.
Tell them to stop calling. Have someone send out a notice that there is a network down and any request for update means that they think that their status is MORE important than fixing the outage. Make this clear. Ask the CEO to notify the company. Tell him that you have people causing further network problems by blocking you from working.
Or just stop answering the phone. Where is your boss, his job is to protect you from this. Why are calls coming to the person working on the problem?
-
@scottalanmiller said in Domain Controller Down (VM):
@BRRABill said in Domain Controller Down (VM):
Hence if he is doing a restore of a DC with another working DC in the domain, it could cause even more issues.
Or am I totally wrong here?
There isn't another working DC.
How do you know that? He said there was one, and the only reason mentioned it might be down was that his PC says "no domain controllers found" but as @JaredBusch has been saying, if DNS is misconfigured, that could also happen, right?
-
@BRRABill said in Domain Controller Down (VM):
@scottalanmiller said in Domain Controller Down (VM):
@BRRABill said in Domain Controller Down (VM):
@JaredBusch said
This does not matter FFS, forget about AD.
He said there is another DC. How does it not matter?
He also said it doesn't work. AD isn't the issue right now.
No he said he can't access it.
If, as was mentioned (by @JaredBusch I think) the DNS settings in DHCP were incorrect, that would make sense.
All I was trying to say is that there MIGHT be a working DC on the network still. It's possible the only issue MIGHT be that DNS settings on the client are wrong.
The secondary DC is not relevant. And changing every client to static IP scheme would be a pain in the ass when he should simply connect to ESXi, and make a new VM based on the VMDK we hope is still there.
-
@JaredBusch said
The secondary DC is not relevant. And changing every client to static IP scheme would be a pain in the ass when he should simply connect to ESXi, and make a new VM based on the VMDK we hope is still there.
Oh yes, that is fine.
My concern was a restore from backup.
-
@wirestyle22 said in Domain Controller Down (VM):
@JaredBusch said in Domain Controller Down (VM):
@wirestyle22 said in Domain Controller Down (VM):
@JaredBusch said in Domain Controller Down (VM):
@wirestyle22 said in Domain Controller Down (VM):
@coliver said in Domain Controller Down (VM):
@wirestyle22 said in Domain Controller Down (VM):
@JaredBusch said in Domain Controller Down (VM):
@wirestyle22 is the VMDK there?
When I attempt to browse it kicks back an error stating "the server could not interpret the users request. the server is unavailable"
You're browsing in the VMWare console? The easiest way to get to it is via:
I'm running version 5.1.0 and I just click on Datastores
So you are using the fat client on your workstation?
Are you logged in with VMWare local account or a domain account?
Because obviously you have domain issues because of the bad DNS setup.
log in to the VMWare client with root and the local password.
I'm logging in with root and the local password actually on the server itself.
No you are not. You said you are using a client. The VMWare server itself only provides a command line interface.
They created a VM called vcenter that uses the client so yes you are correct.
That's not what anyone means when we say to log into the VMware ESXi server itself. That's a client on a VM. Very, very different.
Log into the actual server to remove any unnecessary points of complexity.
-
@JaredBusch said in Domain Controller Down (VM):
@scottalanmiller said in Domain Controller Down (VM):
@BRRABill said in Domain Controller Down (VM):
@JaredBusch said
This does not matter FFS, forget about AD.
He said there is another DC. How does it not matter?
He also said it doesn't work. AD isn't the issue right now.
Well it might work but he has not easy way to know that right now because DHCP is down. If his DHCP server had handed out this DC as a secondary DNS, then things would still be working. Thus why I assume his DHCP is improperly configured. but again. no way to know that until he brings it back online.
Oh good point. Yes, it might be fine on its own. But we assume that it's not actively on the domain or that domain members are not aware of it, so it can't cause problem because it is isolated.
-
-
@scottalanmiller said in Domain Controller Down (VM):
@wirestyle22 said in Domain Controller Down (VM):
@JaredBusch said in Domain Controller Down (VM):
@wirestyle22 said in Domain Controller Down (VM):
@JaredBusch said in Domain Controller Down (VM):
@wirestyle22 said in Domain Controller Down (VM):
@coliver said in Domain Controller Down (VM):
@wirestyle22 said in Domain Controller Down (VM):
@JaredBusch said in Domain Controller Down (VM):
@wirestyle22 is the VMDK there?
When I attempt to browse it kicks back an error stating "the server could not interpret the users request. the server is unavailable"
You're browsing in the VMWare console? The easiest way to get to it is via:
I'm running version 5.1.0 and I just click on Datastores
So you are using the fat client on your workstation?
Are you logged in with VMWare local account or a domain account?
Because obviously you have domain issues because of the bad DNS setup.
log in to the VMWare client with root and the local password.
I'm logging in with root and the local password actually on the server itself.
No you are not. You said you are using a client. The VMWare server itself only provides a command line interface.
They created a VM called vcenter that uses the client so yes you are correct.
That's not what anyone means when we say to log into the VMware ESXi server itself. That's a client on a VM. Very, very different.
Log into the actual server to remove any unnecessary points of complexity.
That VM is likely jsut running the VMWare vCenter web thing or whatever it is called.
Install the old thick client on your desk and connect to the server directly and browse the data store.
-
@scottalanmiller said in Domain Controller Down (VM):
@BRRABill said in Domain Controller Down (VM):
No he said he can't access it.
He did?
He did not. You are not crazy.
-
@BRRABill said in Domain Controller Down (VM):
@scottalanmiller said in Domain Controller Down (VM):
@BRRABill said in Domain Controller Down (VM):
Hence if he is doing a restore of a DC with another working DC in the domain, it could cause even more issues.
Or am I totally wrong here?
There isn't another working DC.
How do you know that? He said there was one, and the only reason mentioned it might be down was that his PC says "no domain controllers found" but as @JaredBusch has been saying, if DNS is misconfigured, that could also happen, right?
Okay, yes, it might work if you point to it. But unless machines are pointed at it, it's not working for the machines. So you can't break something as it is not "working" right now.
-
@JaredBusch said in Domain Controller Down (VM):
Install the old thick client on your desk and connect to the server directly and browse the data store.
@wirestyle22 stay focused on the above task ^^^
-
FOrked the topic about the DCs because it's not helping the OP during an outage.
-
This post is deleted! -
@JaredBusch said in Domain Controller Down (VM):
@scottalanmiller said in Domain Controller Down (VM):
@BRRABill said in Domain Controller Down (VM):
No he said he can't access it.
He did?
He did not. You are not crazy.
He said
"I'm assuming we must have had a domain syncing problem before this occurred, otherwise the other domain should have picked everything up as it is round robin. I attempted to disconnect my PC from the domain and reconnect. It claims there are no active directory controllers found." -
@JaredBusch said in Domain Controller Down (VM):
@scottalanmiller said in Domain Controller Down (VM):
@wirestyle22 said in Domain Controller Down (VM):
@JaredBusch said in Domain Controller Down (VM):
@wirestyle22 said in Domain Controller Down (VM):
@JaredBusch said in Domain Controller Down (VM):
@wirestyle22 said in Domain Controller Down (VM):
@coliver said in Domain Controller Down (VM):
@wirestyle22 said in Domain Controller Down (VM):
@JaredBusch said in Domain Controller Down (VM):
@wirestyle22 is the VMDK there?
When I attempt to browse it kicks back an error stating "the server could not interpret the users request. the server is unavailable"
You're browsing in the VMWare console? The easiest way to get to it is via:
I'm running version 5.1.0 and I just click on Datastores
So you are using the fat client on your workstation?
Are you logged in with VMWare local account or a domain account?
Because obviously you have domain issues because of the bad DNS setup.
log in to the VMWare client with root and the local password.
I'm logging in with root and the local password actually on the server itself.
No you are not. You said you are using a client. The VMWare server itself only provides a command line interface.
They created a VM called vcenter that uses the client so yes you are correct.
That's not what anyone means when we say to log into the VMware ESXi server itself. That's a client on a VM. Very, very different.
Log into the actual server to remove any unnecessary points of complexity.
That VM is likely jsut running the VMWare vCenter web thing or whatever it is called.
Install the old thick client on your desk and connect to the server directly and browse the data store.
Very close to a breakdown, not that that is any of your problems.
https://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2089791 is this what you are referring to? If not, where can I locate the thick client?
-
@wirestyle22 said in Domain Controller Down (VM):
@JaredBusch said in Domain Controller Down (VM):
@scottalanmiller said in Domain Controller Down (VM):
@wirestyle22 said in Domain Controller Down (VM):
@JaredBusch said in Domain Controller Down (VM):
@wirestyle22 said in Domain Controller Down (VM):
@JaredBusch said in Domain Controller Down (VM):
@wirestyle22 said in Domain Controller Down (VM):
@coliver said in Domain Controller Down (VM):
@wirestyle22 said in Domain Controller Down (VM):
@JaredBusch said in Domain Controller Down (VM):
@wirestyle22 is the VMDK there?
When I attempt to browse it kicks back an error stating "the server could not interpret the users request. the server is unavailable"
You're browsing in the VMWare console? The easiest way to get to it is via:
I'm running version 5.1.0 and I just click on Datastores
So you are using the fat client on your workstation?
Are you logged in with VMWare local account or a domain account?
Because obviously you have domain issues because of the bad DNS setup.
log in to the VMWare client with root and the local password.
I'm logging in with root and the local password actually on the server itself.
No you are not. You said you are using a client. The VMWare server itself only provides a command line interface.
They created a VM called vcenter that uses the client so yes you are correct.
That's not what anyone means when we say to log into the VMware ESXi server itself. That's a client on a VM. Very, very different.
Log into the actual server to remove any unnecessary points of complexity.
That VM is likely jsut running the VMWare vCenter web thing or whatever it is called.
Install the old thick client on your desk and connect to the server directly and browse the data store.
Very close to a breakdown, not that that is any of your problems.
https://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2089791 is this what you are referring to? If not, where can I locate the thick client?
Yes
-
@JaredBusch said in Domain Controller Down (VM):
@wirestyle22 said in Domain Controller Down (VM):
@JaredBusch said in Domain Controller Down (VM):
@scottalanmiller said in Domain Controller Down (VM):
@wirestyle22 said in Domain Controller Down (VM):
@JaredBusch said in Domain Controller Down (VM):
@wirestyle22 said in Domain Controller Down (VM):
@JaredBusch said in Domain Controller Down (VM):
@wirestyle22 said in Domain Controller Down (VM):
@coliver said in Domain Controller Down (VM):
@wirestyle22 said in Domain Controller Down (VM):
@JaredBusch said in Domain Controller Down (VM):
@wirestyle22 is the VMDK there?
When I attempt to browse it kicks back an error stating "the server could not interpret the users request. the server is unavailable"
You're browsing in the VMWare console? The easiest way to get to it is via:
I'm running version 5.1.0 and I just click on Datastores
So you are using the fat client on your workstation?
Are you logged in with VMWare local account or a domain account?
Because obviously you have domain issues because of the bad DNS setup.
log in to the VMWare client with root and the local password.
I'm logging in with root and the local password actually on the server itself.
No you are not. You said you are using a client. The VMWare server itself only provides a command line interface.
They created a VM called vcenter that uses the client so yes you are correct.
That's not what anyone means when we say to log into the VMware ESXi server itself. That's a client on a VM. Very, very different.
Log into the actual server to remove any unnecessary points of complexity.
That VM is likely jsut running the VMWare vCenter web thing or whatever it is called.
Install the old thick client on your desk and connect to the server directly and browse the data store.
Very close to a breakdown, not that that is any of your problems.
https://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2089791 is this what you are referring to? If not, where can I locate the thick client?
Yes
Downloading. Thanks.
