I need this script to email the log it generates

JaredBusch

@Pete-S said in I need this script to email the log it generates:

Regardless I suggest putting some more information in the textfile such as hostname or otherthings that would identify what system it is.

None of that needs to be in the log file. The subject line of the email, yes.

JaredBusch

@Pete-S said in I need this script to email the log it generates:

Also perhaps timestamp each output then you'll know how long something takes and you'll know what it was executed on the system.

Not something that is needed to be known.

JaredBusch

@Pete-S said in I need this script to email the log it generates:

@JaredBusch I'm not sure exactly what you're looking for except to email the textfile?

That is correct.

JaredBusch

So, no time to deal with updating and testing the script, today.

But since such a simple post, posted to hopefully generate a conversation, did not do anything helpful....

The basic mail syntax to send an email and attachment is

echo "Some Message Body Text" | mail -s "Some Subject Line" [email protected] -A file.txt

1337

@JaredBusch said in I need this script to email the log it generates:

So, no time to deal with updating and testing the script, today.

But since such a simple post, posted to hopefully generate a conversation, did not do anything helpful....

The basic mail syntax to send an email and attachment is
echo "Some Message Body Text" | mail -s "Some Subject Line" [email protected] -A file.txt

I found it interesting because it's what I was discussion in the other thread about notification emails.

But I haven't researched it enough yet.
For instance what is the difference between mail and mailx? What happens if the mail bounces? Is the mail cached for delivery if it can't be delivered?

JaredBusch

@Pete-S said in I need this script to email the log it generates:

I found it interesting because it's what I was discussion in the other thread about notification emails.

I'm not after alerting. That is not the purpose of this email. It is for a historical record only.

The way I handle this type of stuff is that it goes to a folder and is marked read by a rule.

Then about once a year I purge anything older than a year.

1337

@JaredBusch said in I need this script to email the log it generates:

@Pete-S said in I need this script to email the log it generates:

I found it interesting because it's what I was discussion in the other thread about notification emails.

I'm not after alerting. That is not the purpose of this email. It is for a historical record only.

The way I handle this type of stuff is that it goes to a folder and is marked read by a rule.

Then about once a year I purge anything older than a year.

Yeah, I understood - you just wanted to have the logs mailed to you.

I'd call that a notification (not an alert). The script notifies you that it has been executed and what the results where. You don't intend to look at it, unless you have to, but it's still a notification nevertheless.

stacksofplates

you could use mailgun. I just wrote this tiny app that will send the contents of a file.

package main

import (
	"context"
	"fmt"
	"github.com/mailgun/mailgun-go/v3"
	"io/ioutil"
	"os"
	"time"
)

func main() {
	mg := mailgun.NewMailgun(os.Getenv("DOMAIN"), os.Getenv("API_KEY"))
	data, err := ioutil.ReadFile(os.Args[1])
	if err != nil {
		fmt.Println(err)
	}
	m := mg.NewMessage(
		"[email protected]",
		"Test Log",
		string(data),
		os.Getenv("SEND_ADDRESS"),
                )

	ctx, cancel := context.WithTimeout(context.Background(), time.Second*10)
	defer cancel()

	_, id, err := mg.Send(ctx, m)
	if err != nil {
		fmt.Println(err)
	}
	fmt.Println(id)
}

I lazily take the first argument as the file with the contents you want to send. Just have env vars for the recipient address, your api key and domain (or hard code them). You could take flags and whatever, but this was free and I'm lazy.

1337

@stacksofplates said in I need this script to email the log it generates:

you could use mailgun. I just wrote this tiny app that will send the contents of a file.

I lazily take the first argument as the file with the contents you want to send. Just have env vars for the recipient address, your api key and domain (or hard code them). You could take flags and whatever, but this was free and I'm lazy.

There is one problem with the api approach I think.
I believe tht if you use postfix to deliver the message over SMTP it will put the message in postfix' queue. So if for some reason the mail can't be delivered at that particular time, for instance because the firewall is being rebooted or there is a problem with the mailservice, it will try again later. Using the API you will just a timeout error and that was it.

I'm not a mailgun user but I assume they have a SMTP relay as well?

In any case since we like zoho, I intend to try the new Zoho TransMail service. They only send transactional mail, not marketing, and I think it was $2.5 or something like that per 10K emails. They have both api and SMTP.

stacksofplates

@Pete-S said in I need this script to email the log it generates:

@stacksofplates said in I need this script to email the log it generates:

you could use mailgun. I just wrote this tiny app that will send the contents of a file.

I lazily take the first argument as the file with the contents you want to send. Just have env vars for the recipient address, your api key and domain (or hard code them). You could take flags and whatever, but this was free and I'm lazy.

There is one problem with the api approach I think.
I believe tht if you use postfix to deliver the message over SMTP it will put the message in postfix' queue. So if for some reason the mail can't be delivered at that particular time, for instance because the firewall is being rebooted or there is a problem with the mailservice, it will try again later. Using the API you will just a timeout error and that was it.

I'm not a mailgun user but I assume they have a SMTP relay as well?

In any case since we like zoho, I intend to try the new Zoho TransMail service. They only send transactional mail, not marketing, and I think it was $2.5 or something like that per 10K emails. They have both api and SMTP.

That's no different than postfix. It would be pretty trivial to add a retry block for a timeout condition. Postfix has it built in, you'd need the 5 lines of code here or whatever would be needed. And this will work on literally any system that the binary can be compiled for:

aix
android
darwin
dragonfly
freebsd
hurd
illumos
js
linux
nacl
netbsd
openbsd
plan9
solaris
windows
zos

stacksofplates

Another plus for an API is that snmp is commonly blocked from providers and only enabled with some kind of request.

Also if you want to integrate any other notification (text, telegram notification, slack, etc) it would be trivial to add with this approach.

Not saying API is the best way, but it definitely has advantages.

JaredBusch

@stacksofplates said in I need this script to email the log it generates:

Another plus for an API is that snmp is commonly blocked from providers and only enabled with some kind of request.

Also if you want to integrate any other notification (text, telegram notification, slack, etc) it would be trivial to add with this approach.

Not saying API is the best way, but it definitely has advantages.

I have not had time to look at what you posted yet but I plan on it thank you

stacksofplates

@JaredBusch said in I need this script to email the log it generates:

@stacksofplates said in I need this script to email the log it generates:

Another plus for an API is that snmp is commonly blocked from providers and only enabled with some kind of request.

Also if you want to integrate any other notification (text, telegram notification, slack, etc) it would be trivial to add with this approach.

Not saying API is the best way, but it definitely has advantages.

I have not had time to look at what you posted yet but I plan on it thank you

Yeah no problem. It's really simple so it could be optimized quite a bit with maybe like 30 mins of work.

1337

@stacksofplates said in I need this script to email the log it generates:

@JaredBusch said in I need this script to email the log it generates:

@stacksofplates said in I need this script to email the log it generates:

Another plus for an API is that snmp is commonly blocked from providers and only enabled with some kind of request.

Also if you want to integrate any other notification (text, telegram notification, slack, etc) it would be trivial to add with this approach.

Not saying API is the best way, but it definitely has advantages.

I have not had time to look at what you posted yet but I plan on it thank you

Yeah no problem. It's really simple so it could be optimized quite a bit with maybe like 30 mins of work.

Wouldn't just using curl do the job equally well of sending the message to mailgun?

stacksofplates

@Pete-S said in I need this script to email the log it generates:

@stacksofplates said in I need this script to email the log it generates:

@JaredBusch said in I need this script to email the log it generates:

@stacksofplates said in I need this script to email the log it generates:

Another plus for an API is that snmp is commonly blocked from providers and only enabled with some kind of request.

Also if you want to integrate any other notification (text, telegram notification, slack, etc) it would be trivial to add with this approach.

Not saying API is the best way, but it definitely has advantages.

I have not had time to look at what you posted yet but I plan on it thank you

Yeah no problem. It's really simple so it could be optimized quite a bit with maybe like 30 mins of work.

Wouldn't just using curl do the job equally well of sending the message to mailgun?

Yep. If you really like handling errors and responses in shell scripting it's fine. Unless you use it on Windows where cURL is not really cURL.

I'm not doing raw API calls with the example above. That's using their Go package which simplifies a lot of the API information.

1337

@stacksofplates said in I need this script to email the log it generates:

@Pete-S said in I need this script to email the log it generates:

@stacksofplates said in I need this script to email the log it generates:

@JaredBusch said in I need this script to email the log it generates:

@stacksofplates said in I need this script to email the log it generates:

Another plus for an API is that snmp is commonly blocked from providers and only enabled with some kind of request.

Also if you want to integrate any other notification (text, telegram notification, slack, etc) it would be trivial to add with this approach.

Not saying API is the best way, but it definitely has advantages.

I have not had time to look at what you posted yet but I plan on it thank you

Yeah no problem. It's really simple so it could be optimized quite a bit with maybe like 30 mins of work.

Wouldn't just using curl do the job equally well of sending the message to mailgun?

Yep. If you really like handling errors and responses in shell scripting it's fine. Unless you use it on Windows where cURL is not really cURL.

I'm not doing raw API calls with the example above. That's using their Go package which simplifies a lot of the API information.

OK, I understand. Thanks.

How is it with the maintenance with APIs like this? I mean when you compile something and have to support it over time, it's just like being a package maintainer. If they change the API or their Go package or perhaps OS or Go version, you'd have to recompile and redistribute it to every machine. Or is this something that would only happen very seldom like every two years or something like that?

stacksofplates

@Pete-S said in I need this script to email the log it generates:

@stacksofplates said in I need this script to email the log it generates:

@Pete-S said in I need this script to email the log it generates:

@stacksofplates said in I need this script to email the log it generates:

@JaredBusch said in I need this script to email the log it generates:

@stacksofplates said in I need this script to email the log it generates:

Another plus for an API is that snmp is commonly blocked from providers and only enabled with some kind of request.

Also if you want to integrate any other notification (text, telegram notification, slack, etc) it would be trivial to add with this approach.

Not saying API is the best way, but it definitely has advantages.

I have not had time to look at what you posted yet but I plan on it thank you

Yeah no problem. It's really simple so it could be optimized quite a bit with maybe like 30 mins of work.

Wouldn't just using curl do the job equally well of sending the message to mailgun?

Yep. If you really like handling errors and responses in shell scripting it's fine. Unless you use it on Windows where cURL is not really cURL.

I'm not doing raw API calls with the example above. That's using their Go package which simplifies a lot of the API information.

OK, I understand. Thanks.

How is it with the maintenance with APIs like this? I mean when you compile something and have to support it over time, it's just like being a package maintainer. If they change the API or their Go package or perhaps OS or Go version, you'd have to recompile and redistribute it to every machine. Or is this something that would only happen very seldom like every two years or something like that?

I haven't seen it happen much where they would break the API often. If they were to do a big API change like that you'd likely have a good bit of notice. The packages for Go are versioned in the modules, so you can pin them to limit changes.

Looks like Mailgun is currently on /v3 of their API but some endpoints still use /v1 or /v2. The package would handle that for you since it's maintained by them.

One more advantage specifically with Go, is that you can containerize this easily. This could be done in a scratch container which has 0 dependencies. Then you could just run this with Docker/podman/whatever and easily keep the container up to date across all of your systems. I'm sure Jared wouldn't be doing that here, just a side note.

stacksofplates

@Pete-S said in I need this script to email the log it generates:

OK, I understand. Thanks.

Also, I wasn't trying to be abrasive. I kind of worded that strongly. I just don't like Bash much. I find it annoying, so I'd rather use something else unless it's a really simple thing.

1337

@stacksofplates said in I need this script to email the log it generates:

@Pete-S said in I need this script to email the log it generates:

OK, I understand. Thanks.

Also, I wasn't trying to be abrasive. I kind of worded that strongly. I just don't like Bash much. I find it annoying, so I'd rather use something else unless it's a really simple thing.

No problem. Bash is primitive for sure. Pick the right tool for the job I guess.

Unsolved I need this script to email the log it generates