Introducing Postcards - Our SMS & MMS UI
-
@Skyetel said in Introducing Postcards - Our SMS & MMS UI:
This page does not state that.
https://support.skyetel.com/hc/en-us/articles/360049697373Fixed
And also. OMG 4GB ram?
Yea, docker and the like are resource heavy. Also - for large deployments the DB can start using a lot of RAM.
Exact same error.
CentOS 8 on a $10 Vultr Instance (2GB RAM) and I made a 2GB swapfile also.
-
@JaredBusch said in Introducing Postcards - Our SMS & MMS UI:
@Skyetel said in Introducing Postcards - Our SMS & MMS UI:
This page does not state that.
https://support.skyetel.com/hc/en-us/articles/360049697373Fixed
And also. OMG 4GB ram?
Yea, docker and the like are resource heavy. Also - for large deployments the DB can start using a lot of RAM.
Exact same error.
CentOS 8 on a $10 Vultr Instance (2GB RAM) and I made a 2GB swapfile also.
Use 7. 8 needs some tweaking still.
-
@Skyetel said in Introducing Postcards - Our SMS & MMS UI:
@JaredBusch said in Introducing Postcards - Our SMS & MMS UI:
@Skyetel said in Introducing Postcards - Our SMS & MMS UI:
This page does not state that.
https://support.skyetel.com/hc/en-us/articles/360049697373Fixed
And also. OMG 4GB ram?
Yea, docker and the like are resource heavy. Also - for large deployments the DB can start using a lot of RAM.
Exact same error.
CentOS 8 on a $10 Vultr Instance (2GB RAM) and I made a 2GB swapfile also.
Use 7. 8 needs some tweaking still.
I did, 3 days ago.
-
@JaredBusch Did you give it the 2/4GB of RAM?
FWIW - We are updating the installation script to work with Centos 8.
-
@Skyetel said in Introducing Postcards - Our SMS & MMS UI:
@JaredBusch Did you give it the 2/4GB of RAM?
No, that was not. So I am doing it again now.
@Skyetel said in Introducing Postcards - Our SMS & MMS UI:
FWIW - We are updating the installation script to work with Centos 8.
Well, I refuse to use CentOS 7 in production. That is ancient history with so many components out of support.
-
@Skyetel said in Introducing Postcards - Our SMS & MMS UI:
@JaredBusch Did you give it the 2/4GB of RAM?
FWIW - We are updating the installation script to work with Centos 8.
It doesn't work with CentOS 7 either...
Your devs need to not assume shit when you write tools for public consumption.
You have to start with the least common denominator. In the case of CentOS 7, that would be a minimal install. Doing anything else is simply asking for problems.
I can fix this. but yeah.....
yum install -y net-tools
-
@JaredBusch said in Introducing Postcards - Our SMS & MMS UI:
@Skyetel said in Introducing Postcards - Our SMS & MMS UI:
@JaredBusch Did you give it the 2/4GB of RAM?
No, that was not. So I am doing it again now.
@Skyetel So there it goes. CentOS 7 using a $10 instance on Vultr.
I will now test this out. But the monthly cost to just have this is DOUBLE the cost to run my PBX with 96 extensions and 8-11 simultaneous calls going in/out the trunk, and some amount of extension to extension calls always also. That runs just fine in a $5 instance.
-
-
This is pretty useless if I cannot have more than one number active to a user.
If live, all but one of these numbers will go to a single user that is going to be responsible to reply.
But when I sent a text to a second number, I cannot reply to it.
-
Sending to the primary number, I have a reply box still.
-
@JaredBusch I think this is expected behavior and is by design.
I'll have @cody hop on now and take a look
-
@Skyetel said in Introducing Postcards - Our SMS & MMS UI:
@JaredBusch I think this is expected behavior and is by design.
I'll have @cody hop on now and take a look
Might be intended by developers, but it is useless for production.
-
We added a troubleshooting section to the Postcards Documentation:
https://bitbucket.org/skyetel/postcards-installer/src/master/README.mdIf you can send but not receive messages, please check the Callback URL matches your Phonenumber's Callback URL, which might have changed. Also check that the Callback URL is using the correct http(s) protocol, if you aren't using SSL.
Also please verify that we can send a POST request to your Callback URL and that it isn't getting blocked by a firewall.
-
What SMS settings are required for this. Like... is it GET or POST?
-
@scottalanmiller said in Introducing Postcards - Our SMS & MMS UI:
What SMS settings are required for this. Like... is it GET or POST?
POST.
-
@JasGot said in Introducing Postcards - Our SMS & MMS UI:
@scottalanmiller said in Introducing Postcards - Our SMS & MMS UI:
What SMS settings are required for this. Like... is it GET or POST?
POST.
Thanks.
-
@JasGot said in Introducing Postcards - Our SMS & MMS UI:
@cody said in Introducing Postcards - Our SMS & MMS UI:
I am a developer with Skyetel and would like to try to help resolve some of these upgrade issues you and others are encountering. If you can please message me some additional details
Send me your Skyetel email address and I'll send you the url and my tel number.
Worked with Cody. He was able to see log entries that are not in the SMS log for Skyetel. He was seeing a 404 error. Turns out it was a NAT issue. Funny that now router changes were made.
So it is working now with CentOS 7 64 bit on Hyper-V
I was unable to get it to complete the install with any other attempts. (AWS, Ubuntu, Debian, Liquid Web, Vultr, etc)
-
Just an FYI, I followed the guide using CentOS 7 Server and it installed no hiccups. It's up and working now, first try. Don't think that the docs have changed.
