Windows Server 2012 R2 : randomly changes date/time ?
-
@WrCombs said in Windows Server 2012 R2 : randomly changes date/time ?:
@Obsolesce what did I just do?
just so I can learn
Basically you registered the time service, then started it, then re-synchronized the clock with it's source.
-
Check and make sure there are no scheduled tasks running that fiddle with he time as well.
-
@dafyre said in Windows Server 2012 R2 : randomly changes date/time ?:
Check and make sure there are no scheduled tasks running that fiddle with he time as well.
Ya this is a good idea... if you didn't set it up and manage it's life, someone else coudl have some weird tasks going for whatever reason.
-
@Obsolesce said in Windows Server 2012 R2 : randomly changes date/time ?:
@dafyre said in Windows Server 2012 R2 : randomly changes date/time ?:
Check and make sure there are no scheduled tasks running that fiddle with he time as well.
Ya this is a good idea... if you didn't set it up and manage it's life, someone else coudl have some weird tasks going for whatever reason.
I see something for Time Sync in task scheduler
-
I noticed that it set it's time an hour ahead
-
@DustinB3403 said in Windows Server 2012 R2 : randomly changes date/time ?:
@WrCombs said in Windows Server 2012 R2 : randomly changes date/time ?:
@Obsolesce what did I just do?
just so I can learn
You reset the time sync service, told it to find a time master and told it to not wait to update.
the time sync as in "Internet Time" sync?
I've had issues with that in the past.
Like it's off by an hour and causes issues -
@WrCombs said in Windows Server 2012 R2 : randomly changes date/time ?:
@Obsolesce said in Windows Server 2012 R2 : randomly changes date/time ?:
@dafyre said in Windows Server 2012 R2 : randomly changes date/time ?:
Check and make sure there are no scheduled tasks running that fiddle with he time as well.
Ya this is a good idea... if you didn't set it up and manage it's life, someone else coudl have some weird tasks going for whatever reason.
I see something for Time Sync in task scheduler
Those could be the defaults. You'll have to see who created them and what they do.
-
@DustinB3403 said in Windows Server 2012 R2 : randomly changes date/time ?:
@WrCombs said in Windows Server 2012 R2 : randomly changes date/time ?:
@Obsolesce said in Windows Server 2012 R2 : randomly changes date/time ?:
@dafyre said in Windows Server 2012 R2 : randomly changes date/time ?:
Check and make sure there are no scheduled tasks running that fiddle with he time as well.
Ya this is a good idea... if you didn't set it up and manage it's life, someone else coudl have some weird tasks going for whatever reason.
I see something for Time Sync in task scheduler
Those could be the defaults. You'll have to see who created them and what they do.
they were wrote by Microsoft
-
I've seen the time slip, usually caused from a aging bios battery. But where time is jumping all over the place. That's a new one.
-
@DustinB3403 said in Windows Server 2012 R2 : randomly changes date/time ?:
I've seen the time slip, usually caused from a aging bios battery. But where time is jumping all over the place. That's a new one.
after I re synced, It slipped an hour ahead.
-
@WrCombs said in Windows Server 2012 R2 : randomly changes date/time ?:
@DustinB3403 said in Windows Server 2012 R2 : randomly changes date/time ?:
I've seen the time slip, usually caused from a aging bios battery. But where time is jumping all over the place. That's a new one.
after I re synced, It slipped an hour ahead.
Slip meaning time goes more slowly. So you change it at 4PM Monday and by 8AM Tuesday the clock is some random amount of time behind.
This is a time jump, not a slip.
-
@WrCombs said in Windows Server 2012 R2 : randomly changes date/time ?:
@DustinB3403 said in Windows Server 2012 R2 : randomly changes date/time ?:
I've seen the time slip, usually caused from a aging bios battery. But where time is jumping all over the place. That's a new one.
after I re synced, It slipped an hour ahead.
An entire hour ahead, would be a timezone issue. If it reoccurs.
-
@WrCombs said in Windows Server 2012 R2 : randomly changes date/time ?:
@DustinB3403 said in Windows Server 2012 R2 : randomly changes date/time ?:
I've seen the time slip, usually caused from a aging bios battery. But where time is jumping all over the place. That's a new one.
after I re synced, It slipped an hour ahead.
Check (as in look at) the timezone and the automatic daylight saving check box
-
And timezone issues don't jump forward and then backwards 3 hours and then forwards 1.
It's a consistent change.
-
@Obsolesce said in Windows Server 2012 R2 : randomly changes date/time ?:
@WrCombs said in Windows Server 2012 R2 : randomly changes date/time ?:
@DustinB3403 said in Windows Server 2012 R2 : randomly changes date/time ?:
I've seen the time slip, usually caused from a aging bios battery. But where time is jumping all over the place. That's a new one.
after I re synced, It slipped an hour ahead.
Check (as in look at) the timezone and the automatic daylight saving check box
Says eastern time .
-
@WrCombs said in Windows Server 2012 R2 : randomly changes date/time ?:
@Obsolesce said in Windows Server 2012 R2 : randomly changes date/time ?:
@WrCombs said in Windows Server 2012 R2 : randomly changes date/time ?:
@DustinB3403 said in Windows Server 2012 R2 : randomly changes date/time ?:
I've seen the time slip, usually caused from a aging bios battery. But where time is jumping all over the place. That's a new one.
after I re synced, It slipped an hour ahead.
Check (as in look at) the timezone and the automatic daylight saving check box
Says eastern time .
wont let me change to Central Standard either
-
@WrCombs said in Windows Server 2012 R2 : randomly changes date/time ?:
@WrCombs said in Windows Server 2012 R2 : randomly changes date/time ?:
@Obsolesce said in Windows Server 2012 R2 : randomly changes date/time ?:
@WrCombs said in Windows Server 2012 R2 : randomly changes date/time ?:
@DustinB3403 said in Windows Server 2012 R2 : randomly changes date/time ?:
I've seen the time slip, usually caused from a aging bios battery. But where time is jumping all over the place. That's a new one.
after I re synced, It slipped an hour ahead.
Check (as in look at) the timezone and the automatic daylight saving check box
Says eastern time .
wont let me change to Central Standard either
I'm assuming you're in Central Standard, and that would help to explain the "it jumped ahead an hour" issue.
-
The reason it won't let you change it, IIRC is that it's set to allow windows to manage the time itself.
-
@WrCombs said in Windows Server 2012 R2 : randomly changes date/time ?:
@WrCombs said in Windows Server 2012 R2 : randomly changes date/time ?:
@Obsolesce said in Windows Server 2012 R2 : randomly changes date/time ?:
@WrCombs said in Windows Server 2012 R2 : randomly changes date/time ?:
@DustinB3403 said in Windows Server 2012 R2 : randomly changes date/time ?:
I've seen the time slip, usually caused from a aging bios battery. But where time is jumping all over the place. That's a new one.
after I re synced, It slipped an hour ahead.
Check (as in look at) the timezone and the automatic daylight saving check box
Says eastern time .
wont let me change to Central Standard either
What do you mean it won't let you? Is it grayed out? Is there a link to click in the window to enable changes to be made?
-
@Obsolesce said in Windows Server 2012 R2 : randomly changes date/time ?:
@WrCombs said in Windows Server 2012 R2 : randomly changes date/time ?:
@WrCombs said in Windows Server 2012 R2 : randomly changes date/time ?:
@Obsolesce said in Windows Server 2012 R2 : randomly changes date/time ?:
@WrCombs said in Windows Server 2012 R2 : randomly changes date/time ?:
@DustinB3403 said in Windows Server 2012 R2 : randomly changes date/time ?:
I've seen the time slip, usually caused from a aging bios battery. But where time is jumping all over the place. That's a new one.
after I re synced, It slipped an hour ahead.
Check (as in look at) the timezone and the automatic daylight saving check box
Says eastern time .
wont let me change to Central Standard either
What do you mean it won't let you? Is it grayed out? Is there a link to click in the window to enable changes to be made?
When I change it to CST it says " Your current time zone is not recognized, Please select a valid time zone. "