Fedora 29 Server (or 28) install is stuck...?
-
@black3dynamite Ubuntu 18.10 gets stuck at "Starting Snappy daemon..."
-
@FATeknollogee said in Fedora 29 Server (or 28) install is stuck...?:
@black3dynamite said in Fedora 29 Server (or 28) install is stuck...?:
@FATeknollogee just out of curiosity, does ubuntu 18.10 or 18.04 boot and install successfully?
Let me try that & get back to you.
Same difference.
-
Not surprised, I bet that there is a relatively universal update that is affecting everything.
-
@scottalanmiller said in Fedora 29 Server (or 28) install is stuck...?:
Not surprised, I bet that there is a relatively universal update that is affecting everything.
Yeah... In the Linux kernel which is in everything. .
-
@scottalanmiller said in Fedora 29 Server (or 28) install is stuck...?:
Not surprised, I bet that there is a relatively universal update that is affecting everything.
CentOS and RHEL works because they are using 3.10.x with backports while Fedora and Ubuntu are using 4.x.
-
@DustinB3403 said in Fedora 29 Server (or 28) install is stuck...?:
@scottalanmiller said in Fedora 29 Server (or 28) install is stuck...?:
Not surprised, I bet that there is a relatively universal update that is affecting everything.
Yeah... In the Linux kernel which is in everything. .
Not likely something IN the kernel, but either a setting or something added. That's my guess.
-
If possible I think @FATeknollogee should load default bios settings, then set bios boot settings to legacy (not UEFI or dual) and reinstall on a clean drive. This will give you an old skool MBR and bypass a bunch of potential UEFI problems.
-
@FATeknollogee said in Fedora 29 Server (or 28) install is stuck...?:
@travisdh1 said in Fedora 29 (or 28) install is stuck...?:
@FATeknollogee Typically, I find a corrupted download borked the installer if it hangs at any point in the boot process when installing.
What it's doing right then specifically, I'm not sure. I could take a couple educated guesses, but they'd just be guesses.
I tried F29 and F28 iso's...same problem.
Maybe I should try burning the iso with Rufus instead of Fedora Media Writer?I just did a fresh install of Fedora 29. I downloaded the Fedora Workstation 29 NET installer, and burned it with Fedora Media Writer on Fedora 28. During installation, I selected the Cinnamon desktop instead of default. It went well. I notice a nice difference between that and 28.
-
Email received this afternoon from SM:
We have tested Fedora 29 on this MB and found it has video display issue with this MB. Then we tested Fedora 23 on this MB and it works fine. It seems the new Fedora OS’s kernel has issue with this MB. X10SDV-4C+-TLN4F use Aspeed chip for Graphics output. Please go to this link for its Linux driver information. https://www.aspeedtech.com/support.php -
@FATeknollogee said in Fedora 29 Server (or 28) install is stuck...?:
Email received this afternoon from SM:
We have tested Fedora 29 on this MB and found it has video display issue with this MB. Then we tested Fedora 23 on this MB and it works fine. It seems the new Fedora OS’s kernel has issue with this MB. X10SDV-4C+-TLN4F use Aspeed chip for Graphics output. Please go to this link for its Linux driver information. https://www.aspeedtech.com/support.phpThat's interesting. I had to put some boot options on the installer when I tried Fedora on another Supermicro server as well. Also on an old HP server for that matter. Can't remember what it was though or where it goes. Nomodeset maybe.
Anyway, not the problem I though it was.
-
Do you need graphics output at all anymore in servers? Can you solely use IPMI, or does that require a graphics card/chip?
-
@bnrstnr said in Fedora 29 Server (or 28) install is stuck...?:
Do you need graphics output at all anymore in servers? Can you solely use IPMI, or does that require a graphics card/chip?
Fedora Server by default has a console only login.
So unless a desktop is being deployed for some particular reason the issue is a compatibility issue with the drivers and not one that should be overlooked.
-
@DustinB3403 said in Fedora 29 Server (or 28) install is stuck...?:
Fedora Server by default has a console only login.
Yes, I understand that. I'm asking if the physical hardware needs a graphics card/chip at all. Even for console output... I assume it would need something if you're hooking up a monitor, but I don't know if the IPMI NEEDS a graphics chip at all.
Maybe there's a way to install the operating system without that component? Disable the on-board chip in the bios maybe?
-
@bnrstnr said in Fedora 29 Server (or 28) install is stuck...?:
@DustinB3403 said in Fedora 29 Server (or 28) install is stuck...?:
Fedora Server by default has a console only login.
Yes, I understand that. I'm asking if the physical hardware needs a graphics card/chip at all. Even for console output... I assume it would need something if you're hooking up a monitor, but I don't know if the IPMI NEEDS a graphics chip at all.
Maybe there's a way to install the operating system without that component?
Yeah, for console output you need graphics of some kind.
-
@DustinB3403 said in Fedora 29 Server (or 28) install is stuck...?:
@bnrstnr said in Fedora 29 Server (or 28) install is stuck...?:
@DustinB3403 said in Fedora 29 Server (or 28) install is stuck...?:
Fedora Server by default has a console only login.
Yes, I understand that. I'm asking if the physical hardware needs a graphics card/chip at all. Even for console output... I assume it would need something if you're hooking up a monitor, but I don't know if the IPMI NEEDS a graphics chip at all.
Maybe there's a way to install the operating system without that component?
Yeah, for console output you need graphics of some kind.
But you don't need a specific graphics driver in linux as all graphics chips can do 80x25 textmode.
But why does the Fedora Server installer run in graphics mode if the server then only does console in textmode? The way I understood the problem here was that it's the installer that hangs, not the OS after installation.
PS. IPMI need a graphic chip or more correctly, IPMI is a graphics chip, CPU, memory and a network interface integrated into one chip.
-
Update...
There is definitely something wrong with this mb.
I have the 6 core version X10SDV-6C and Fedora 29 installs with no errors!
-
@FATeknollogee said in Fedora 29 Server (or 28) install is stuck...?:
Update...
There is definitely something wrong with this mb.
I have the 6 core version X10SDV-6C and Fedora 29 installs with no errors!
Ah, awesome. Might just be a hardware error. Interesting.
-
Update from SM:
"After we perform more test and use a non-widescreen monitor, we can finish installing Fedora 29 on our 4C version MB." -
@FATeknollogee said in Fedora 29 Server (or 28) install is stuck...?:
Update from SM:
"After we perform more test and use a non-widescreen monitor, we can finish installing Fedora 29 on our 4C version MB."Very odd.
