3D Printed House
-
-
@art_of_shred said in 3D Printed House:
@Minion-Queen said in 3D Printed House:
Uh oh, now the queen wants a castle...
You mean all us minions get to go live in the castle after it's built, right?
-
A lot of the excitement around this stuff is less the size and more the ability to explore designs that were impractical before.
-
@travisdh1 said in 3D Printed House:
@art_of_shred said in 3D Printed House:
@Minion-Queen said in 3D Printed House:
Uh oh, now the queen wants a castle...
You mean all us minions get to go live in the castle after it's built, right?
*starts packing bags*
-
If I recall correctly NASA and the private space companies are looking into this technology to build habitats on the moon and mars. The problem they keep running into is how do you get the raw materials there in a consistent manner.
-
@coliver said in 3D Printed House:
If I recall correctly NASA and the private space companies are looking into this technology to build habitats on the moon and mars. The problem they keep running into is how do you get the raw materials there in a consistent manner.
You have to figure out how to produce the raw resources on site... at least as much as possible.
-
@travisdh1 said in 3D Printed House:
@coliver said in 3D Printed House:
If I recall correctly NASA and the private space companies are looking into this technology to build habitats on the moon and mars. The problem they keep running into is how do you get the raw materials there in a consistent manner.
You have to figure out how to produce the raw resources on site... at least as much as possible.
Yep, from the reading I did last year Mars has some decent aggregate that could be harvested by a robot. They still need some kind of binding agent and the most common one, and the one that often works the best, just isn't available on Mars where and when we'd need it.
-
@coliver said in 3D Printed House:
If I recall correctly NASA and the private space companies are looking into this technology to build habitats on the moon and mars. The problem they keep running into is how do you get the raw materials there in a consistent manner.
That'll be a great way to go. They just need to create a cement factory there too, which is totally doable.
-
@scottalanmiller With what water?
I suppose if they can pull the Hydrogen and Oxygen out of the surrounding material and condense it into water then they'd be able too..
But it's not as easy as going to the local stream and collecting a few billion gallons of the stuff..
-
@DustinB3403 said in 3D Printed House:
@scottalanmiller With what water?
If we are talking Mars or the Moon, there is expected to be water there.
-
@scottalanmiller The moon and mars have been determined to have very little accessible water. And the ice on mars is yet to be confirmed as even accessible.
If it is the next issue comes in as how do they break the ice apart and pick it up, and then how to melt it. And then how to mix it.
And lastly the tech for all of these printers is based around being in the center of the structure. Which poses some issues, such as completing the roof.
-
@DustinB3403 said in 3D Printed House:
@scottalanmiller The moon and mars have been determined to have very little accessible water. And the ice on mars is yet to be confirmed as even accessible.
If it is the next issue comes in as how do they break the ice apart and pick it up, and then how to melt it. And then how to mix it.
And lastly the tech for all of these printers is based around being in the center of the structure. Which poses some issues, such as completing the roof.
There are some 3D structure printers that are more akin to a shipping container crane. They can print some pretty large building too.
-
@DustinB3403 You remember The Martian? That turning 1 liter of hydroxide into 4 liters of water actually works. Mars might not have much of an atmosphere, but it doesn't take much.
-
My only question is where is the rebar?
-
@gjacobse said in 3D Printed House:
My only question is where is the rebar?
They were using fiberglass instead of rebar for that extra support.
-
@travisdh1 said in 3D Printed House:
@gjacobse said in 3D Printed House:
My only question is where is the rebar?
They were using fiberglass instead of rebar for that extra support.
IIRC once hardened it functions almost identically to rebar reinforced concrete. Which is kind of amazing.
-
@coliver said in 3D Printed House:
@travisdh1 said in 3D Printed House:
@gjacobse said in 3D Printed House:
My only question is where is the rebar?
They were using fiberglass instead of rebar for that extra support.
IIRC once hardened it functions almost identically to rebar reinforced concrete. Which is kind of amazing.
Conventionally-poured concrete allows for whatever odd shapes, addition of reinforcement, and also for placement of pipes and conduits. While this is cool in a very basic sense, it lacks pretty much all of those features.
-
@coliver said in 3D Printed House:
@travisdh1 said in 3D Printed House:
@gjacobse said in 3D Printed House:
My only question is where is the rebar?
They were using fiberglass instead of rebar for that extra support.
IIRC once hardened it functions almost identically to rebar reinforced concrete. Which is kind of amazing.
It can even be stronger depending on the mixture.
-
These can easily be deployed in poor countries to print houses. The best part in my opinion is the lack of a need for any concrete. These machines can print houses with nothing but dirt and water. For those of you that want the machine to build bigger perfect homes complete with duct work, electrical, and wiring that might not sound great, but for homeless people in poverty stricken countries that's a win.
-
@jhtech86 said in 3D Printed House:
These can easily be deployed in poor countries to print houses. The best part in my opinion is the lack of a need for any concrete. These machines can print houses with nothing but dirt and water. For those of you that want the machine to build bigger perfect homes complete with duct work, electrical, and wiring that might not sound great, but for homeless people in poverty stricken countries that's a win.
Not to mention a lot of that can be added afterward as well. It would be really interesting to see the cost per sqft of this vs "traditional" housing.
