Thoughts on EdgeMax Pro 8
-
@Joel said in Thoughts on EdgeMax Pro 8:
I'm setting up a new network with 6 individual offices within a single shared office space.
I was thinking of using the EdgeMax pro...Will each have its own physical network, so each port goes off to a dedicated switching stack?
-
@Joel said in Thoughts on EdgeMax Pro 8:
I havent used one before so will it be straight forward to configure via the Gui?
It's the same easy GUI (be sure to update before starting) as the EdgeRouter Lite and EdgeRouter X. It's pretty easy.
-
Thank you for the responses and since sub created topics.
I will refrain from using the subnets as suggested and will use a /23 range.
Yes, each office will have their own dedicated switch. Based on this, is the ER8 a good shout?
They currently use a Draytek 2860 and have 4 offices in their building but when they move out to the new. We'll have 6 offices so wanted something a little more robust and reliable.
Can the ER8 do load balancing so I can assign each port say 30mb each ? Pressume I can find all the steps/guides online
-
@Breffni-Potter said in Thoughts on EdgeMax Pro 8:
Skip 192.168.1.1 please.
Most home networks use that, so IP address conflicts with VPNs tend to happen.
Great Recommendation.
Forget 192.168.1.0,192.168.1.1, 192.168.2.1
You can use 192.168.200.1 192.168.201.1....
-
@Joel said in Thoughts on EdgeMax Pro 8:
Yes, each office will have their own dedicated switch. Based on this, is the ER8 a good shout?
Yes, if you are wiring each one to its own hardware, then Pro 8 will do that very well.
-
@scottalanmiller said in Thoughts on EdgeMax Pro 8:
@Joel said in Thoughts on EdgeMax Pro 8:
Yes, each office will have their own dedicated switch. Based on this, is the ER8 a good shout?
Yes, if you are wiring each one to its own hardware, then Pro 8 will do that very well.
Correct. WIth dedicated switching to be behind it, then the ER8 is an awesome choice.
-
@Joel said in Thoughts on EdgeMax Pro 8:
Can the ER8 do load balancing so I can assign each port say 30mb each ? Pressume I can find all the steps/guides online
You can do some load balancing globally, or you can do shaping on each interface.
I highly recommend against setting a 30mb limit per line. that just hurts everyone.
Just set global QoS for things like VoIP and such.
-
I agree with @JaredBusch look at shaping and such before you look at capping. Capping is almost always a very bad idea, everyone loses.
-
Even if the 6 offices are totally independent? We have a 200mb line coming in so is it not fair to allocate each port 32mb each? Or do you think I should just leave it defaulted but prioritise QOS for voip?
-
@Joel said in Thoughts on EdgeMax Pro 8:
Even if the 6 offices are totally independent? We have a 200mb line coming in so is it not fair to allocate each port 32mb each? Or do you think I should just leave it defaulted but prioritise QOS for voip?
Correct.
Does someone have any examples of actual QOS rules for the EdgeRouterX series? I've got the basic "Download = 700kbps, Upload=300kbps" for our connections, but that's it so far.
-
@travisdh1 said in Thoughts on EdgeMax Pro 8:
@Joel said in Thoughts on EdgeMax Pro 8:
Even if the 6 offices are totally independent? We have a 200mb line coming in so is it not fair to allocate each port 32mb each? Or do you think I should just leave it defaulted but prioritise QOS for voip?
Correct.
Does someone have any examples of actual QOS rules for the EdgeRouterX series? I've got the basic "Download = 700kbps, Upload=300kbps" for our connections, but that's it so far.
Since version 1.8 or maybe 1.7 even, they added new a QoS process outside of the original traffic shaping stuff.
fq_codelis the new standard and is in the GUI. -
@JaredBusch said in Thoughts on EdgeMax Pro 8:
fq_codelis the new standard and is in the GUI. -
@JaredBusch said in Thoughts on EdgeMax Pro 8:
@travisdh1 said in Thoughts on EdgeMax Pro 8:
@Joel said in Thoughts on EdgeMax Pro 8:
Even if the 6 offices are totally independent? We have a 200mb line coming in so is it not fair to allocate each port 32mb each? Or do you think I should just leave it defaulted but prioritise QOS for voip?
Correct.
Does someone have any examples of actual QOS rules for the EdgeRouterX series? I've got the basic "Download = 700kbps, Upload=300kbps" for our connections, but that's it so far.
Since version 1.8 or maybe 1.7 even, they added new a QoS process outside of the original traffic shaping stuff.
fq_codelis the new standard and is in the GUI.Yeah, when I looked around everything I found was still command line based.
-
@travisdh1 said in Thoughts on EdgeMax Pro 8:
@JaredBusch said in Thoughts on EdgeMax Pro 8:
@travisdh1 said in Thoughts on EdgeMax Pro 8:
@Joel said in Thoughts on EdgeMax Pro 8:
Even if the 6 offices are totally independent? We have a 200mb line coming in so is it not fair to allocate each port 32mb each? Or do you think I should just leave it defaulted but prioritise QOS for voip?
Correct.
Does someone have any examples of actual QOS rules for the EdgeRouterX series? I've got the basic "Download = 700kbps, Upload=300kbps" for our connections, but that's it so far.
Since version 1.8 or maybe 1.7 even, they added new a QoS process outside of the original traffic shaping stuff.
fq_codelis the new standard and is in the GUI.Yeah, when I looked around everything I found was still command line based.
Well, as you can see from that screenshot, i have not bothered to update mine to
fq_codeleither...
