Troubleshooting SIP connection to Remote PBX
-
I used the Ip address : 162.209.2.96 (as host)
username is your extension (just the number)
password is your secret
Name the account "NTG" -
@WrCombs yes apparently it should be quite easy, but it still doesn´t register.
-
@Romo said in Troubleshooting SIP connection to Remote PBX:
@WrCombs yes apparently it should be quite easy, but it still doesn´t register.
I had a hard time with it too..
All of that looks correct...
Manual config right? ..
Show the Error screen?
-
-
I tried connecting with another extension number expecting a diferent error since I don't know the actual secter, but I still get 408.
-
Try now, your IP range was blocked.
-
@scottalanmiller Still getting a 408
-
@Romo said in Troubleshooting SIP connection to Remote PBX:
@scottalanmiller Still getting a 408
I full rebooted the firewall to be sure.
-
Can you ping the IP address?
-
@scottalanmiller Finally registered thank you
-
@Romo said in Troubleshooting SIP connection to Remote PBX:
@scottalanmiller Finally registered thank you
Woot! I wonder why the reload failed but the restart worked. Hmm...
-
-
@scottalanmiller said in Troubleshooting SIP connection to Remote PBX:
Now @Romo and @WrCombs can call each other when they are bored and can't find me.
yeah! we can work through this stuff!
-
Only my android phone with Zoiper registers this is very strange. Can't get the softphone in my laptop to register
-
Never mind it is now working properly = )
-
I use Linphone on iOS. It works great while it is on screen. Doesn't stay registered when it loses focus, though.
-
@scottalanmiller Doesn't it do that because iOS doesnt allow any UDP connection in the background? Wouldn't TCP work better in mobiles in order to save battery as well?
-
@Romo said in Troubleshooting SIP connection to Remote PBX:
@scottalanmiller Doesn't it do that because iOS doesnt allow any UDP connection in the background? Wouldn't TCP work better in mobiles in order to save battery as well?
I've not tested that, I'll check!
-
@Romo said in Troubleshooting SIP connection to Remote PBX:
@scottalanmiller Doesn't it do that because iOS doesnt allow any UDP connection in the background? Wouldn't TCP work better in mobiles in order to save battery as well?
ZoIPer has an OMFG kill my battery setting to force it to keep registration in the background.
-
@JaredBusch said in Troubleshooting SIP connection to Remote PBX:
@Romo said in Troubleshooting SIP connection to Remote PBX:
@scottalanmiller Doesn't it do that because iOS doesnt allow any UDP connection in the background? Wouldn't TCP work better in mobiles in order to save battery as well?
ZoIPer has an OMFG kill my battery setting to force it to keep registration in the background.
Which is a good idea to turn off... That thing will eat through your battery in a few hours.
