Building Elastix MT via RPM Repo
-
Thanks once again for your prompt reply, I am not a Linux expert but the details are as below
Linux 77167.datasoft.ws 2.6.32-43-pve #1 SMP Tue Oct 27 09:55:55 CET 2015 x86_64 x86_64 x86_64 GNU/Linux
2.6.32-43-pve
-
@norojoshi said:
Thanks once again for your prompt reply, I am not a Linux expert but the details are as below
Linux 77167.datasoft.ws 2.6.32-43-pve #1 SMP Tue Oct 27 09:55:55 CET 2015 x86_64 x86_64 x86_64 GNU/Linux
2.6.32-43-pve
The VPS is Datsoft Networks then? Their phone number is from St. Louis. Interesting that I have never heard of them.
-
Yes from datasoft
-
I have used them for more than 3 years and provide very cheap VPSs
-
Looks like Datasoft is using ProxMox. So not VMs, but Containers for Linux. So the kernel is coming from the VM underneath. This isn't "exactly" a VPS, it's actually a VPC. Normally not an issue but I assume that there is no control over the kernel here and they must have compiled one that lacks the necessary drivers.
-
@norojoshi said:
I have used them for more than 3 years and provide very cheap VPSs
Yeah, doing Containers would let them have even higher than normal Linux server density as they are running only a single kernel amongst all of the customers on a single piece of hardware. It's very efficient, but you are a little more like Docker than like a VM.
-
@norojoshi said:
I have used them for more than 3 years and provide very cheap VPSs
I realize that local means nothing with hosting, but most companies try to market to the gullible SMB locally too. Just surprised I had not heard of them.
-
When you boot up your VM, does the system give you any option to pick another kernel?
-
@scottalanmiller
No I do not get that option, I guess I will need to upgrade to a VPS..will check with the provider -
@scottalanmiller
a quick question do you think Elastix MT could be used to provide CloudPBX -
@norojoshi said:
@scottalanmiller
a quick question do you think Elastix MT could be used to provide CloudPBXThat is the entire point of multi-tenant solutions.
-
@norojoshi said:
@scottalanmiller
a quick question do you think Elastix MT could be used to provide CloudPBXYes, that is there intention with the platform. There are other use cases, but they are niche. A central, hosted PBX platform is the core purpose.
-
Hello Scott,
Your guide was easy and fast, thanks tor that! But unfortunately i was having an error in the last part of the installation... Im not sure if this is because the CentOS available on the VPS its 6.5...and you recommend just 6...
The error is the next:unixODBC.x86_64 0:2.2.14-14.el6
urw-fonts.noarch 0:2.4-10.el6
vsftpd.x86_64 0:2.2.2-14.el6
wanpipe-util.x86_64 0:7.0.10-2
wavpack.x86_64 0:4.60-1.1.el6
xinetd.x86_64 2:2.3.14-39.el6_4
xorg-x11-font-utils.x86_64 1:7.2-11.el6Failed:
elastix-framework.noarch 0:3.0.0-11Complete!
And then in the web console, the system ask me about the SQL Password, I configured that and then ask me about the root login over CentOS... until there nothing so abnormal.. but nothing more happened...
(params 0)
0(3589) : <core> [cfg.y:3412]: yyerror_at(): parse error in config file //etc/kamailio/kamailio.cfg, li
ne 1275, column 41: unknown command, missing loadmodule?ERROR: bad config file (5 errors)
SETTING FILE PERMISSIONS Asterisk
Permissions Asterisk OK
Starting asterisk: [ OK ]
Starting crond: [ OK ]
Starting Elastix Port Knocking: Error: no such table: portknock_eth
[ OK ]
Starting fail2ban: [ OK ]
Starting HylaFAX queue manager (faxq): [ OK ]
Starting HylaFAX server (hfaxd): [ OK ]
Starting IAXmodem: [ OK ]CentOS release 6.7 (Final)
Kernel 4.4.0-x86_64-linode63 on an x86_6438-85.members.linode.com login: root
Password:
Last login: Mon Feb 8 20:04:37 on ttyS0
[root@38-85 ~]#I really appreciate your help... i can not find a lot of information about this Elastix MT version.
Regards! -
@rialejo Welcome to MangoLassi!
-
I will have to loop around and do a fresh install again on a new VM. It's coming up on midnight here but I might be able to delve into this tomorrow.
-
@scottalanmiller Sure, don't worry and thanks for your help!
-
@scottalanmiller hi finally got the VPS configured with MT, has to pay the provider to set it up. Is there any special method from previous Elastix for setting up trunks. I am not being able to view when i run comand Sip show peers... thanking you in advane
-
@norojoshi said:
@scottalanmiller hi finally got the VPS configured with MT, has to pay the provider to set it up.
They probably just popped in the ISO image and did a full install. What VPS are you working with?
Is there any special method from previous Elastix for setting up trunks. I am not being able to view when i run comand Sip show peers... thanking you in advane
I don't believe that the method has changed. You have trunks that were working previously with Elastix 2.x?
-
@scottalanmiller yes same trunks ..Anu suggestions
-