Installing Chef 12 on CentOS 6.5

scottalanmiller

Before installing, we need to disable SELinux as it does not play nice with Chef.

setenforce permissive

scottalanmiller

Now you are install the Chef Server...

rpm -ivh chef-server-*.rpm

Once that has completed...

chef-server-ctl reconfigure
chef-server-ctl test

scottalanmiller

Add these two lines to /etc/sysconfig/iptables

-A INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT
-A INPUT -m state --state NEW -m tcp -p tcp --dport 443 -j ACCEPT

They fit nicely under the matching line for --dport 22.

Once you have edited that file, reload the firewall rules using this command:

service iptables reload

JaredBusch

@scottalanmiller said:

Before installing, we need to disable SELinux as it does not play nice with Chef.
setenforce permissive

This did not survive a reboot on my CentOS 7 box. Is that supposed to be a permanent change? Or should the config file be edited also?

scottalanmiller

@JaredBusch said:

@scottalanmiller said:
Before installing, we need to disable SELinux as it does not play nice with Chef.
setenforce permissive
This did not survive a reboot on my CentOS 7 box. Is that supposed to be a permanent change? Or should the config file be edited also?

That's a "live" change. It does not change the permanent configuration. To change the permanent setup edit...

cat /etc/sysconfig/selinux

And modify the SELINUX= line to...

SELINUX=permissive

JaredBusch

@scottalanmiller I was just wonder if it needed to be permanent or not.

scottalanmiller

@JaredBusch said:

@scottalanmiller I was just wonder if it needed to be permanent or not.

Most things only need it during install time and it can be re-enabled once the installation is done. Not always true, but typically. MySQL and MariaDB databases being common cases where you turn it off during setup and turn it back on afterwards.

scottalanmiller

Now we need to install the management console (you want one of those, right?) With Chef 12 there is a new process for this and it is not documented from Opscode which is very frustrating.

First we have to do the physical install:

chef-server-ctl install opscode-manage

Then we have to know that it needs to be configured post install, nothing will tell you to do this:

opscode-manage-ctl reconfigure

That's it, now you can navigate to your server.

scottalanmiller

The first time that you log in you will be required to create a new account. Simply follow the on-screen prompts to do so. This is quick and easy.

Once you have done this you will be prompted to "Create New Organization" as, obviously, none currently exists. Click the button to do so...

scottalanmiller

You will need both a full name and a short name for the organization. The full name should be the actual company name. The short name should be short, easy and all lower case. It's just for internal Chef reference.

That's it, you are up and running with Chef!

scottalanmiller

There we go, all set. Hopefully that will help some people get started with Chef since it is basically really simple but lacking a few specific things that you "just have to know" because Opscode does not document them (a gap in the Chef 12 documents) it is very hard for no reason.