RAID5 SSD Performance Expectations
-
@Pete-S said in RAID5 SSD Performance Expectations:
@brandon220 said in RAID5 SSD Performance Expectations:
I was looking at some specs on one of my machines and decided to look at the difference for a SSD and spinner. Pretty interesting... The IOPS difference is more than I would have guessed.
Yes, and if you would've put in a NVMe enterprise SSD in the mix it would have been crazy. Expect 2000-3000MB/sec and 200-600 thousand IOPS - for a single drive.
Yeah, even my desktop drive circa 2014 was getting 50K IOPS.
-
@scottalanmiller said in RAID5 SSD Performance Expectations:
@Pete-S said in RAID5 SSD Performance Expectations:
@brandon220 said in RAID5 SSD Performance Expectations:
I was looking at some specs on one of my machines and decided to look at the difference for a SSD and spinner. Pretty interesting... The IOPS difference is more than I would have guessed.
Yes, and if you would've put in a NVMe enterprise SSD in the mix it would have been crazy. Expect 2000-3000MB/sec and 200-600 thousand IOPS - for a single drive.
Yeah, even my desktop drive circa 2014 was getting 50K IOPS.
Enterprise SATA is in the 70-90K range today and I suspect it's the SATA interface holding them back.
Intel was pretty clear already a few years ago that they consider SATA and SAS SSDs to be legacy products. It's NVMe in it's different shapes and forms that is the current technology of choice.
-
@Pete-S said in RAID5 SSD Performance Expectations:
Intel was pretty clear already a few years ago that they consider SATA and SAS SSDs to be legacy products.
Yeah, the interface and protocols are totally designed around the needs of spinning platters.
-
@scottalanmiller said in RAID5 SSD Performance Expectations:
@Pete-S said in RAID5 SSD Performance Expectations:
Intel was pretty clear already a few years ago that they consider SATA and SAS SSDs to be legacy products.
Yeah, the interface and protocols are totally designed around the needs of spinning platters.
Yeah and the latest figures on actual reliability in the field puts enterprise SSD way, way ahead of spinners.
I think we are getting close to the point where raid doesn't make sense anymore. Simply when a single drive will have both superior speed, superior reliability and enough capacity compared to what traditionally would call for a RAID array of HDDs.
Having a drive failure will become such an odd failure like having a raid controller, a motherboard or a CPU fail. You'd just replace it and restore the entire thing from backup.
-
@Pete-S said in RAID5 SSD Performance Expectations:
I think we are getting close to the point where raid doesn't make sense anymore. Simply when a single drive will have both superior speed, superior reliability and enough capacity compared to what traditionally would call for a RAID array of HDDs.
We have been there. Ive got a raid 0 in my work desktop for last two years and it really makes no difference. These are sata drives and not even nvme.
-
@Pete-S said in RAID5 SSD Performance Expectations:
Having a drive failure will become such an odd failure like having a raid controller, a motherboard or a CPU fail. You'd just replace it and restore the entire thing from backup.
I think drives already fail less than RAID controllers. From working in giant environmnts, the thing that fails more than mobos or CPUs is RAM. That's the worst one as it does the most damage and is hard to mitigate.
The difference though is that mobo, controllers, PSUs, are stateless to the system but drives are stateful. So their failure has a different type of impact, regardless of frequency.
-
@scottalanmiller said in RAID5 SSD Performance Expectations:
@Pete-S said in RAID5 SSD Performance Expectations:
Having a drive failure will become such an odd failure like having a raid controller, a motherboard or a CPU fail. You'd just replace it and restore the entire thing from backup.
I think drives already fail less than RAID controllers. From working in giant environmnts, the thing that fails more than mobos or CPUs is RAM. That's the worst one as it does the most damage and is hard to mitigate.
The difference though is that mobo, controllers, PSUs, are stateless to the system but drives are stateful. So their failure has a different type of impact, regardless of frequency.
Well, the stateful-ness of the drives is not something we can count fully on, hence the saying "raid is not backup".
What I'm proposing is that when it becomes very unlikely that a drive fails we could rethink our strategy and go for single drives instead of raid arrays. In the very unlikely event that a failure did occur, we are restoring from backup, which we are prepared to do anyway.
With HDDs the failure rate is too high but with enterprise SSDs it's starting to get into the "will not fail" category.
-
@Pete-S said in RAID5 SSD Performance Expectations:
@scottalanmiller said in RAID5 SSD Performance Expectations:
@Pete-S said in RAID5 SSD Performance Expectations:
Having a drive failure will become such an odd failure like having a raid controller, a motherboard or a CPU fail. You'd just replace it and restore the entire thing from backup.
I think drives already fail less than RAID controllers. From working in giant environmnts, the thing that fails more than mobos or CPUs is RAM. That's the worst one as it does the most damage and is hard to mitigate.
The difference though is that mobo, controllers, PSUs, are stateless to the system but drives are stateful. So their failure has a different type of impact, regardless of frequency.
Well, the stateful-ness of the drives is not something we can count fully on, hence the saying "raid is not backup".
What I'm proposing is that when it becomes very unlikely that a drive fails we could rethink our strategy and go for single drives instead of raid arrays. In the very unlikely event that a failure did occur, we are restoring from backup, which we are prepared to do anyway.
With HDDs the failure rate is too high but with enterprise SSDs it's starting to get into the "will not fail" category.
As an example assume we have 4 servers with a RAID10 array of 4 x 2TB drives each. Annual failure rate of HDDs are a few percent, say 3% for arguments sake. With 16 drives in total, every year there is about 50% chance that a drive will fail. So over the lifespan of the servers it's very likely that we will see one or more drive failures.
Now assume the same 4 servers with a single enterprise 4TB NVMe drive in each. Annual failure rate is 0.4% (actual number a few years back). With 4 drives in total, every year there is less than 2% chance that any drive will fail. So over the lifespan of the server it's very unlikely that we will ever see a drive failure at all. Sure, if it does happen anyway, we are restoring from backup instead of rebuilding the array.
-
@Pete-S said in RAID5 SSD Performance Expectations:
@Pete-S said in RAID5 SSD Performance Expectations:
@scottalanmiller said in RAID5 SSD Performance Expectations:
@Pete-S said in RAID5 SSD Performance Expectations:
Having a drive failure will become such an odd failure like having a raid controller, a motherboard or a CPU fail. You'd just replace it and restore the entire thing from backup.
I think drives already fail less than RAID controllers. From working in giant environmnts, the thing that fails more than mobos or CPUs is RAM. That's the worst one as it does the most damage and is hard to mitigate.
The difference though is that mobo, controllers, PSUs, are stateless to the system but drives are stateful. So their failure has a different type of impact, regardless of frequency.
Well, the stateful-ness of the drives is not something we can count fully on, hence the saying "raid is not backup".
What I'm proposing is that when it becomes very unlikely that a drive fails we could rethink our strategy and go for single drives instead of raid arrays. In the very unlikely event that a failure did occur, we are restoring from backup, which we are prepared to do anyway.
With HDDs the failure rate is too high but with enterprise SSDs it's starting to get into the "will not fail" category.
As an example assume we have 4 servers with a RAID10 array of 4 x 2TB drives each. Annual failure rate of HDDs are a few percent, say 3% for arguments sake. With 16 drives in total, every year there is about 50% chance that a drive will fail. So over the lifespan of the servers it's very likely that we will see one or more drive failures.
Now assume the same 4 servers with a single enterprise 4TB NVMe drive in each. Annual failure rate is 0.4% (actual number a few years back). With 4 drives in total, every year there is less than 2% chance that any drive will fail. So over the lifespan of the server it's very unlikely that we will ever see a drive failure at all. Sure, if it does happen anyway, we are restoring from backup instead of rebuilding the array.
As long as you can justify the downtime in the event that a single drive failure takes an entire server down (albeit with a low statistical chance).
If that isn't a concern no use running RAID anyway.
-
@biggen said in RAID5 SSD Performance Expectations:
@Pete-S said in RAID5 SSD Performance Expectations:
@Pete-S said in RAID5 SSD Performance Expectations:
@scottalanmiller said in RAID5 SSD Performance Expectations:
@Pete-S said in RAID5 SSD Performance Expectations:
Having a drive failure will become such an odd failure like having a raid controller, a motherboard or a CPU fail. You'd just replace it and restore the entire thing from backup.
I think drives already fail less than RAID controllers. From working in giant environmnts, the thing that fails more than mobos or CPUs is RAM. That's the worst one as it does the most damage and is hard to mitigate.
The difference though is that mobo, controllers, PSUs, are stateless to the system but drives are stateful. So their failure has a different type of impact, regardless of frequency.
Well, the stateful-ness of the drives is not something we can count fully on, hence the saying "raid is not backup".
What I'm proposing is that when it becomes very unlikely that a drive fails we could rethink our strategy and go for single drives instead of raid arrays. In the very unlikely event that a failure did occur, we are restoring from backup, which we are prepared to do anyway.
With HDDs the failure rate is too high but with enterprise SSDs it's starting to get into the "will not fail" category.
As an example assume we have 4 servers with a RAID10 array of 4 x 2TB drives each. Annual failure rate of HDDs are a few percent, say 3% for arguments sake. With 16 drives in total, every year there is about 50% chance that a drive will fail. So over the lifespan of the servers it's very likely that we will see one or more drive failures.
Now assume the same 4 servers with a single enterprise 4TB NVMe drive in each. Annual failure rate is 0.4% (actual number a few years back). With 4 drives in total, every year there is less than 2% chance that any drive will fail. So over the lifespan of the server it's very unlikely that we will ever see a drive failure at all. Sure, if it does happen anyway, we are restoring from backup instead of rebuilding the array.
As long as you can justify the downtime in the event that a single drive failure takes an entire server down (albeit with a low statistical chance).
If that isn't a concern no use running RAID anyway.
That makes sense. But regardless of RAID or not, there are always things that can take the entire server down, for instance a motherboard failure. So that is something that is always there.
I think you can take the probability x downtime to get the average downtime. And that times the cost per hour if you want to put it in $$$.
So if something is 2% likely to happen and causes 10 hours of downtime, you get 0.2 hours (12 minutes) of downtime on average. If that downtime is going to cost $10K per hour then it's $2K.
If that downtime is unacceptable you need to have more servers or more reliable servers. 12 minutes of downtime per year is 99.997% availability. 10 hours of downtime per year is 99.8%.
-
@biggen said in RAID5 SSD Performance Expectations:
As long as you can justify the downtime in the event that a single drive failure takes an entire server down (albeit with a low statistical chance).
In business it is rare, but possible, that it is the downtime that matters. It's the dataloss. If losing a few hours of data will cripple you to the tune of millions of dollars, for example, then you do things to protect the dataloss "since backup".
-
@Pete-S said in RAID5 SSD Performance Expectations:
That makes sense. But regardless of RAID or not, there are always things that can take the entire server down, for instance a motherboard failure. So that is something that is always there.
Hence my point about controller rates. In our giant environment on Wall St. RAID controller failures were the top cause of downtime, then RAM, then mobos. PSUs and drives failed more often, but were hot swap and almost never turned into downtime.
-
Quick update, I modified Server 2 with the SSDs RAID cache policy from Write Through to Write Back, and No Read Ahead to Read Ahead. This appears to have made a drastic improvement as 55GB Windows VM live vMotions to Server 2 are now being completed in about 1 1/2 minutes vs 4 minutes previously, and the network monitor is showing performance on par with what I was seeing on Server 3. Now on to getting all 3 servers in direct connect mode for vMotion and backups over 10Gb/s. Thanks.
-
@zachary715 said in RAID5 SSD Performance Expectations:
I modified Server 2 with the SSDs RAID cache policy from Write Through to Write Back, and No Read Ahead to Read Ahead
Why was it write-through to begin with? I've only done that in some very niche instances.
-
@Obsolesce said in RAID5 SSD Performance Expectations:
@zachary715 said in RAID5 SSD Performance Expectations:
I modified Server 2 with the SSDs RAID cache policy from Write Through to Write Back, and No Read Ahead to Read Ahead
Why was it write-through to begin with? I've only done that in some very niche instances.
I've always configured Write Back in the past, but didn't know if using SSDs changed that. Did some reading initially which led me to believe that Write Through was the better choice for performance as well as data loss issues. Maybe should have done a little more research prior to deciding.
-
@zachary715 said in RAID5 SSD Performance Expectations:
Did some reading initially which led me to believe that Write Through was the better choice for performance as well as data loss issues.
Write Through is, in theory, better for reliability but isn't a real consider in a well maintained controller. But it kills performance by bypassing the cache.
-
@scottalanmiller said in RAID5 SSD Performance Expectations:
@zachary715 said in RAID5 SSD Performance Expectations:
Did some reading initially which led me to believe that Write Through was the better choice for performance as well as data loss issues.
Write Through is, in theory, better for reliability but isn't a real consider in a well maintained controller. But it kills performance by bypassing the cache.
Part of the reason I created this thread so that someone might see my current setup and let me know that. I wasn't aware of how much the cache impacted performance for SSD. I know now
-
@scottalanmiller said in RAID5 SSD Performance Expectations:
@zachary715 said in RAID5 SSD Performance Expectations:
Did some reading initially which led me to believe that Write Through was the better choice for performance as well as data loss issues.
Write Through is, in theory, better for reliability but isn't a real consider in a well maintained controller. But it kills performance by bypassing the cache.
We assume your controller has either non volatile cache or battery backup.
-
@Dashrender said in RAID5 SSD Performance Expectations:
@scottalanmiller said in RAID5 SSD Performance Expectations:
@zachary715 said in RAID5 SSD Performance Expectations:
Did some reading initially which led me to believe that Write Through was the better choice for performance as well as data loss issues.
Write Through is, in theory, better for reliability but isn't a real consider in a well maintained controller. But it kills performance by bypassing the cache.
We assume your controller has either non volatile cache or battery backup.
PERC H730p Mini has 2GB NV cache.
-
@zachary715 said in RAID5 SSD Performance Expectations:
@scottalanmiller said in RAID5 SSD Performance Expectations:
@zachary715 said in RAID5 SSD Performance Expectations:
Did some reading initially which led me to believe that Write Through was the better choice for performance as well as data loss issues.
Write Through is, in theory, better for reliability but isn't a real consider in a well maintained controller. But it kills performance by bypassing the cache.
Part of the reason I created this thread so that someone might see my current setup and let me know that. I wasn't aware of how much the cache impacted performance for SSD. I know now
Not so much that it's affecting SSD - that it's affecting ANY array behind it.
Do that to your HDD and see how badly that system performance crashes.
