Unsolved Troubleshooting Help Requested
-
@Obsolesce said in Troubleshooting Help Requested:
Are you using NetworkManager? If so, turn that shit off.
Not using NM.
-
@Obsolesce said in Troubleshooting Help Requested:
Try adding 127.0.0.1 to /etc/resolv.conf
No change with adding the loopback.
-
@DustinB3403 : The fact that you can ping the gateway/router by name and IP makes me suspect it's the firewall.
AFAIK, there is nothing on a linux box that would allow it to distinguish between LAN and WAN when performing lookups. -
@manxam said in Troubleshooting Help Requested:
@DustinB3403 : The fact that you can ping the gateway/router by name and IP makes me suspect it's the firewall.
AFAIK, there is nothing on a linux box that would allow it to distinguish between LAN and WAN when performing lookups.the firewall, OR the default gateway is messed up. Check the routes on the VM.
-
@scottalanmiller I have 1 route on the VM, and its a mirror image of the route on the working VM, with the exception of the device name, and IP.
-
Working
Not Working
-
@DustinB3403 : Yes, but that doesn't mean the firewall doesn't have a rule (or is a Sonicwall -- see my old post) to block outbound on WAN from that IP.
-
Double check mac address so you don't have two VMs with the same. That and conflicting ip addresses can cause some strange effects.
-
Clear arp caches and Mac address tables on your gateway or firewall sounds like a Mac address conflict at the gateway
-
Just for dirt, try changing the ip assigned to the problem machine and re-initializing the MAC address on the virtual NIC... feels like the edge device is blocking internet access or it's being blackholed on the way out... has anyone been testing content filters or other security solutions on the network?
-
@notverypunny just for dirt?
Dont know that expression.
-
NIC card type make a difference here? e1000 vs vmxnet3
-
Different VM networks defined on the VM for the host?
-
@scottalanmiller Yeah... I've never really stopped to think about it, just something that I grew up hearing.....
-
@wrx7m said in Troubleshooting Help Requested:
Different VM networks defined on the VM for the host?
No, differents hosts, but the NICs connect to the same lan.
@SmithErick said in Troubleshooting Help Requested:
NIC card type make a difference here? e1000 vs vmxnet3
Different Hosts
@Pete-S said in Troubleshooting Help Requested:
Double check mac address so you don't have two VMs with the same. That and conflicting ip addresses can cause some strange effects.
Already confirmed all of the details, the MAC is unique across the entire network.
-
VLANs?
-
@wrx7m said in Troubleshooting Help Requested:
VLANs?
No, and this VM is on the same vlan as other VMs on the same host.
PS I've restored this VM to a completely different hypervisor and the issue persists. So either its the VM or the gateway.
-
@DustinB3403 said in Troubleshooting Help Requested:
@wrx7m said in Troubleshooting Help Requested:
VLANs?
No, and this VM is on the same vlan as other VMs on the same host.
PS I've restored this VM to a completely different hypervisor and the issue persists. So either its the VM or the gateway.
Have you tried a different IP, or even power down this machine and assign the same IP to another host to see if it gets blocked? Is the restored VM using the same MAC address as the original or has the restored version got a reinitialised MAC?
Do you have access to check the logs on the gateway / edge / router to see if it's blocking / intercepting / messing with your host
