Create NFS file share on Hyper-V Server 2016
-
@tim_g said in Create NFS file share on Hyper-V Server 2016:
@scottalanmiller said in Create NFS file share on Hyper-V Server 2016:
@tim_g said in Create NFS file share on Hyper-V Server 2016:
Possible solutions:
- Create a simple fileserver VM on HV06, serving an NFS share that is located on the MD1000.
- Because it's on a VM, the NFS share will be inside of a .VHDX file.
- This makes restorations more time consuming or complex, because first the .VHDX would need to be restored in order to restore the NFS share inside of it... and then the backup data in the NFS share could finally then be recovered.
- Because it's on a VM, the NFS share will be inside of a .VHDX file.
This is the part that is consistently incorrect. You do not need to restore the VHDX first.
Okay, so how do I get the data off of the VHDX, which is on a Tape, without restoring the VHDX?
One way is again to mount the VHD on the host and then pull the files out that way. Then it has nothing to do with NFS. Just mounting a drive and reading data.
- Create a simple fileserver VM on HV06, serving an NFS share that is located on the MD1000.
-
@tim_g said in Create NFS file share on Hyper-V Server 2016:
I don't think the tape software will let me dive into a VHDX to restore a single file from it, if it expands multiple tapes... or even at all.
This isn't an issue because you don't have to backup the VHDX, you can install an agent INSIDE the VM where the NFS is, and backup the files directly.
-
@tim_g said in Create NFS file share on Hyper-V Server 2016:
I don't think the tape software will let me dive into a VHDX to restore a single file from it, if it expands multiple tapes... or even at all.
Why is there a VHDX being backed up at all. The issue starts with the fact that you are even talking about the VHDX. Just don't use that, problem solved. There is no reason to be backing up the NFS server's contents in a container like that. You weren't gonig to do that with Hyper-V, so you don't need to do it here.
-
@dashrender said in Create NFS file share on Hyper-V Server 2016:
@tim_g said in Create NFS file share on Hyper-V Server 2016:
I don't think the tape software will let me dive into a VHDX to restore a single file from it, if it expands multiple tapes... or even at all.
This isn't an issue because you don't have to backup the VHDX, you can install an agent INSIDE the VM where the NFS is, and backup the files directly.
Except his backup solution may not have agents. . . to be installed.
Which If you need a free agent, use UrBackup
-
@stacksofplates said in Create NFS file share on Hyper-V Server 2016:
@tim_g said in Create NFS file share on Hyper-V Server 2016:
@scottalanmiller said in Create NFS file share on Hyper-V Server 2016:
@tim_g said in Create NFS file share on Hyper-V Server 2016:
Possible solutions:
- Create a simple fileserver VM on HV06, serving an NFS share that is located on the MD1000.
- Because it's on a VM, the NFS share will be inside of a .VHDX file.
- This makes restorations more time consuming or complex, because first the .VHDX would need to be restored in order to restore the NFS share inside of it... and then the backup data in the NFS share could finally then be recovered.
- Because it's on a VM, the NFS share will be inside of a .VHDX file.
This is the part that is consistently incorrect. You do not need to restore the VHDX first.
Okay, so how do I get the data off of the VHDX, which is on a Tape, without restoring the VHDX?
One way is again to mount the VHD on the host and then pull the files out that way. Then it has nothing to do with NFS. Just mounting a drive and reading data.
Well, if the VHDX is on the tape.. I'm not sure how you'd mount it. Though I'm sure some systems probably allow you to do that, then you just wait for the tape to load up - probably have timeout issues though.
- Create a simple fileserver VM on HV06, serving an NFS share that is located on the MD1000.
-
@tim_g said in Create NFS file share on Hyper-V Server 2016:
@scottalanmiller said in Create NFS file share on Hyper-V Server 2016:
@tim_g said in Create NFS file share on Hyper-V Server 2016:
Possible solutions:
- Create a simple fileserver VM on HV06, serving an NFS share that is located on the MD1000.
- Because it's on a VM, the NFS share will be inside of a .VHDX file.
- This makes restorations more time consuming or complex, because first the .VHDX would need to be restored in order to restore the NFS share inside of it... and then the backup data in the NFS share could finally then be recovered.
- Because it's on a VM, the NFS share will be inside of a .VHDX file.
This is the part that is consistently incorrect. You do not need to restore the VHDX first.
Okay, so how do I get the data off of the VHDX, which is on a Tape, without restoring the VHDX?
By backing it up normally rather than by putting it into a VHDX and backing it up from the outside. How were you going to do it if you backed up from Hyper-V? Do it the same way.
The Linux VM only gives you more choices, not fewer.
- Create a simple fileserver VM on HV06, serving an NFS share that is located on the MD1000.
-
@dustinb3403 said in Create NFS file share on Hyper-V Server 2016:
@dashrender said in Create NFS file share on Hyper-V Server 2016:
@tim_g said in Create NFS file share on Hyper-V Server 2016:
I don't think the tape software will let me dive into a VHDX to restore a single file from it, if it expands multiple tapes... or even at all.
This isn't an issue because you don't have to backup the VHDX, you can install an agent INSIDE the VM where the NFS is, and backup the files directly.
Except his backup solution may not have agents. . . to be installed.
Which If you need a free agent, use UrBackup
Exactly - there are ways around that too, as you said, by using another software solution.
-
@dashrender said in Create NFS file share on Hyper-V Server 2016:
@stacksofplates said in Create NFS file share on Hyper-V Server 2016:
@tim_g said in Create NFS file share on Hyper-V Server 2016:
@scottalanmiller said in Create NFS file share on Hyper-V Server 2016:
@tim_g said in Create NFS file share on Hyper-V Server 2016:
Possible solutions:
- Create a simple fileserver VM on HV06, serving an NFS share that is located on the MD1000.
- Because it's on a VM, the NFS share will be inside of a .VHDX file.
- This makes restorations more time consuming or complex, because first the .VHDX would need to be restored in order to restore the NFS share inside of it... and then the backup data in the NFS share could finally then be recovered.
- Because it's on a VM, the NFS share will be inside of a .VHDX file.
This is the part that is consistently incorrect. You do not need to restore the VHDX first.
Okay, so how do I get the data off of the VHDX, which is on a Tape, without restoring the VHDX?
One way is again to mount the VHD on the host and then pull the files out that way. Then it has nothing to do with NFS. Just mounting a drive and reading data.
Well, if the VHDX is on the tape.. I'm not sure how you'd mount it. Though I'm sure some systems probably allow you to do that, then you just wait for the tape to load up - probably have timeout issues though.
Right, this has to be done right from the beginning, can't be fixed after the wrong thing was backed up.
- Create a simple fileserver VM on HV06, serving an NFS share that is located on the MD1000.
-
@dashrender said in Create NFS file share on Hyper-V Server 2016:
@stacksofplates said in Create NFS file share on Hyper-V Server 2016:
@tim_g said in Create NFS file share on Hyper-V Server 2016:
@scottalanmiller said in Create NFS file share on Hyper-V Server 2016:
@tim_g said in Create NFS file share on Hyper-V Server 2016:
Possible solutions:
- Create a simple fileserver VM on HV06, serving an NFS share that is located on the MD1000.
- Because it's on a VM, the NFS share will be inside of a .VHDX file.
- This makes restorations more time consuming or complex, because first the .VHDX would need to be restored in order to restore the NFS share inside of it... and then the backup data in the NFS share could finally then be recovered.
- Because it's on a VM, the NFS share will be inside of a .VHDX file.
This is the part that is consistently incorrect. You do not need to restore the VHDX first.
Okay, so how do I get the data off of the VHDX, which is on a Tape, without restoring the VHDX?
One way is again to mount the VHD on the host and then pull the files out that way. Then it has nothing to do with NFS. Just mounting a drive and reading data.
Well, if the VHDX is on the tape.. I'm not sure how you'd mount it. Though I'm sure some systems probably allow you to do that, then you just wait for the tape to load up - probably have timeout issues though.
Tape shouldn't be used in the recovery process of "grabbing 1 file". It's a our site burnt down, time to rebuild everything when you get the tapes out.
- Create a simple fileserver VM on HV06, serving an NFS share that is located on the MD1000.
-
@dashrender said in Create NFS file share on Hyper-V Server 2016:
@stacksofplates said in Create NFS file share on Hyper-V Server 2016:
@tim_g said in Create NFS file share on Hyper-V Server 2016:
@scottalanmiller said in Create NFS file share on Hyper-V Server 2016:
@tim_g said in Create NFS file share on Hyper-V Server 2016:
Possible solutions:
- Create a simple fileserver VM on HV06, serving an NFS share that is located on the MD1000.
- Because it's on a VM, the NFS share will be inside of a .VHDX file.
- This makes restorations more time consuming or complex, because first the .VHDX would need to be restored in order to restore the NFS share inside of it... and then the backup data in the NFS share could finally then be recovered.
- Because it's on a VM, the NFS share will be inside of a .VHDX file.
This is the part that is consistently incorrect. You do not need to restore the VHDX first.
Okay, so how do I get the data off of the VHDX, which is on a Tape, without restoring the VHDX?
One way is again to mount the VHD on the host and then pull the files out that way. Then it has nothing to do with NFS. Just mounting a drive and reading data.
Well, if the VHDX is on the tape.. I'm not sure how you'd mount it. Though I'm sure some systems probably allow you to do that, then you just wait for the tape to load up - probably have timeout issues though.
It can't be on the tape? How is he running a live VM from tape? Mount the VHD on the hypervisor itself and pull the files out.
- Create a simple fileserver VM on HV06, serving an NFS share that is located on the MD1000.
-
@stacksofplates said in Create NFS file share on Hyper-V Server 2016:
@dashrender said in Create NFS file share on Hyper-V Server 2016:
@stacksofplates said in Create NFS file share on Hyper-V Server 2016:
@tim_g said in Create NFS file share on Hyper-V Server 2016:
@scottalanmiller said in Create NFS file share on Hyper-V Server 2016:
@tim_g said in Create NFS file share on Hyper-V Server 2016:
Possible solutions:
- Create a simple fileserver VM on HV06, serving an NFS share that is located on the MD1000.
- Because it's on a VM, the NFS share will be inside of a .VHDX file.
- This makes restorations more time consuming or complex, because first the .VHDX would need to be restored in order to restore the NFS share inside of it... and then the backup data in the NFS share could finally then be recovered.
- Because it's on a VM, the NFS share will be inside of a .VHDX file.
This is the part that is consistently incorrect. You do not need to restore the VHDX first.
Okay, so how do I get the data off of the VHDX, which is on a Tape, without restoring the VHDX?
One way is again to mount the VHD on the host and then pull the files out that way. Then it has nothing to do with NFS. Just mounting a drive and reading data.
Well, if the VHDX is on the tape.. I'm not sure how you'd mount it. Though I'm sure some systems probably allow you to do that, then you just wait for the tape to load up - probably have timeout issues though.
It can't be on the tape? How is he running a live VM from tape? Mount the VHD on the hypervisor itself and pull the files out.
That's the thing he is unwilling to do.
- Create a simple fileserver VM on HV06, serving an NFS share that is located on the MD1000.
-
@scottalanmiller said in Create NFS file share on Hyper-V Server 2016:
@stacksofplates said in Create NFS file share on Hyper-V Server 2016:
@dashrender said in Create NFS file share on Hyper-V Server 2016:
@stacksofplates said in Create NFS file share on Hyper-V Server 2016:
@tim_g said in Create NFS file share on Hyper-V Server 2016:
@scottalanmiller said in Create NFS file share on Hyper-V Server 2016:
@tim_g said in Create NFS file share on Hyper-V Server 2016:
Possible solutions:
- Create a simple fileserver VM on HV06, serving an NFS share that is located on the MD1000.
- Because it's on a VM, the NFS share will be inside of a .VHDX file.
- This makes restorations more time consuming or complex, because first the .VHDX would need to be restored in order to restore the NFS share inside of it... and then the backup data in the NFS share could finally then be recovered.
- Because it's on a VM, the NFS share will be inside of a .VHDX file.
This is the part that is consistently incorrect. You do not need to restore the VHDX first.
Okay, so how do I get the data off of the VHDX, which is on a Tape, without restoring the VHDX?
One way is again to mount the VHD on the host and then pull the files out that way. Then it has nothing to do with NFS. Just mounting a drive and reading data.
Well, if the VHDX is on the tape.. I'm not sure how you'd mount it. Though I'm sure some systems probably allow you to do that, then you just wait for the tape to load up - probably have timeout issues though.
It can't be on the tape? How is he running a live VM from tape? Mount the VHD on the hypervisor itself and pull the files out.
That's the thing he is unwilling to do.
Oh that's what I kept mentioning but I didn't see a response to any of mine. Doing too many things at once here.
- Create a simple fileserver VM on HV06, serving an NFS share that is located on the MD1000.
-
@stacksofplates said in Create NFS file share on Hyper-V Server 2016:
@dashrender said in Create NFS file share on Hyper-V Server 2016:
@stacksofplates said in Create NFS file share on Hyper-V Server 2016:
@tim_g said in Create NFS file share on Hyper-V Server 2016:
@scottalanmiller said in Create NFS file share on Hyper-V Server 2016:
@tim_g said in Create NFS file share on Hyper-V Server 2016:
Possible solutions:
- Create a simple fileserver VM on HV06, serving an NFS share that is located on the MD1000.
- Because it's on a VM, the NFS share will be inside of a .VHDX file.
- This makes restorations more time consuming or complex, because first the .VHDX would need to be restored in order to restore the NFS share inside of it... and then the backup data in the NFS share could finally then be recovered.
- Because it's on a VM, the NFS share will be inside of a .VHDX file.
This is the part that is consistently incorrect. You do not need to restore the VHDX first.
Okay, so how do I get the data off of the VHDX, which is on a Tape, without restoring the VHDX?
One way is again to mount the VHD on the host and then pull the files out that way. Then it has nothing to do with NFS. Just mounting a drive and reading data.
Well, if the VHDX is on the tape.. I'm not sure how you'd mount it. Though I'm sure some systems probably allow you to do that, then you just wait for the tape to load up - probably have timeout issues though.
It can't be on the tape? How is he running a live VM from tape? Mount the VHD on the hypervisor itself and pull the files out.
He isn't, the tape is for secondary backups. The MD1000 is being backed up to the Tape as 1 block device. 1 File.
Which is where this issue is coming in. His backup mechanism is the root cause, in that he is backing up multiple little boxes, and making them a giant warehouse that has to be unpacked to get the critical files.
Change this to back up the critical files individually rather than as 1 massive file. Problem solved.
- Create a simple fileserver VM on HV06, serving an NFS share that is located on the MD1000.
-
@stacksofplates said in Create NFS file share on Hyper-V Server 2016:
@scottalanmiller said in Create NFS file share on Hyper-V Server 2016:
@stacksofplates said in Create NFS file share on Hyper-V Server 2016:
@dashrender said in Create NFS file share on Hyper-V Server 2016:
@stacksofplates said in Create NFS file share on Hyper-V Server 2016:
@tim_g said in Create NFS file share on Hyper-V Server 2016:
@scottalanmiller said in Create NFS file share on Hyper-V Server 2016:
@tim_g said in Create NFS file share on Hyper-V Server 2016:
Possible solutions:
- Create a simple fileserver VM on HV06, serving an NFS share that is located on the MD1000.
- Because it's on a VM, the NFS share will be inside of a .VHDX file.
- This makes restorations more time consuming or complex, because first the .VHDX would need to be restored in order to restore the NFS share inside of it... and then the backup data in the NFS share could finally then be recovered.
- Because it's on a VM, the NFS share will be inside of a .VHDX file.
This is the part that is consistently incorrect. You do not need to restore the VHDX first.
Okay, so how do I get the data off of the VHDX, which is on a Tape, without restoring the VHDX?
One way is again to mount the VHD on the host and then pull the files out that way. Then it has nothing to do with NFS. Just mounting a drive and reading data.
Well, if the VHDX is on the tape.. I'm not sure how you'd mount it. Though I'm sure some systems probably allow you to do that, then you just wait for the tape to load up - probably have timeout issues though.
It can't be on the tape? How is he running a live VM from tape? Mount the VHD on the hypervisor itself and pull the files out.
That's the thing he is unwilling to do.
Oh that's what I kept mentioning but I didn't see a response to any of mine. Doing too many things at once here.
yeah, you and I are on the same page.. both mentioned agents, etc but no response to that solution.
- Create a simple fileserver VM on HV06, serving an NFS share that is located on the MD1000.
-
What I'm unclear on, is if BOTH the initial server AND the backup host have failed at the same time, why do we want to restore a single file?
-
@Tim_G what I would do is change your backup mechanism, use UrBackup if budget is the issue.
Take backups of every VM individually and push them to the MD1000.
From the MD1000 if you needed, push it to tape, but push the individual files, not the entire block device.
-
@dustinb3403 said in Create NFS file share on Hyper-V Server 2016:
@stacksofplates said in Create NFS file share on Hyper-V Server 2016:
@dashrender said in Create NFS file share on Hyper-V Server 2016:
@stacksofplates said in Create NFS file share on Hyper-V Server 2016:
@tim_g said in Create NFS file share on Hyper-V Server 2016:
@scottalanmiller said in Create NFS file share on Hyper-V Server 2016:
@tim_g said in Create NFS file share on Hyper-V Server 2016:
Possible solutions:
- Create a simple fileserver VM on HV06, serving an NFS share that is located on the MD1000.
- Because it's on a VM, the NFS share will be inside of a .VHDX file.
- This makes restorations more time consuming or complex, because first the .VHDX would need to be restored in order to restore the NFS share inside of it... and then the backup data in the NFS share could finally then be recovered.
- Because it's on a VM, the NFS share will be inside of a .VHDX file.
This is the part that is consistently incorrect. You do not need to restore the VHDX first.
Okay, so how do I get the data off of the VHDX, which is on a Tape, without restoring the VHDX?
One way is again to mount the VHD on the host and then pull the files out that way. Then it has nothing to do with NFS. Just mounting a drive and reading data.
Well, if the VHDX is on the tape.. I'm not sure how you'd mount it. Though I'm sure some systems probably allow you to do that, then you just wait for the tape to load up - probably have timeout issues though.
It can't be on the tape? How is he running a live VM from tape? Mount the VHD on the hypervisor itself and pull the files out.
He isn't, the tape is for secondary backups. The MD1000 is being backed up to the Tape as 1 block device. 1 File.
Which is where this issue is coming in. His backup mechanism is the root cause, in that he is backing up multiple little boxes, and making them a giant warehouse that has to be unpacked to get the critical files.
Change this to back up the critical files individually rather than as 1 massive file. Problem solved.
Right, either through many smaller NFS mounts, each NFS mount having it's own VHDX.
- Create a simple fileserver VM on HV06, serving an NFS share that is located on the MD1000.
-
@scottalanmiller said in Create NFS file share on Hyper-V Server 2016:
What I'm unclear on, is if BOTH the initial server AND the backup host have failed at the same time, why do we want to restore a single file?
I don't believe that is the failure situation we're talking about here.
-
@scottalanmiller said in Create NFS file share on Hyper-V Server 2016:
What I'm unclear on, is if BOTH the initial server AND the backup host have failed at the same time, why do we want to restore a single file?
I've had cases where entire systems have gone up, and literally nothing but a single Crystal Report file was critical for production.
So I can understand the need to restore just a single file, as that file can be run anywhere, once you have a working system on which to run it.
-
@dashrender said in Create NFS file share on Hyper-V Server 2016:
@scottalanmiller said in Create NFS file share on Hyper-V Server 2016:
What I'm unclear on, is if BOTH the initial server AND the backup host have failed at the same time, why do we want to restore a single file?
I don't believe that is the failure situation we're talking about here.
If there wasn't a failure, he could restore directly from the existing NFS share.
