UBNT EdgeRouter LAN Config Issue
-
@krisleslie said in UBNT EdgeRouter LAN Config Issue:
I guess to stay focused, once I can clear the office, Ill start making the changes to the scope.
If you can kick all those BYOD devices off now until you get things fixed.. that might help you a lot. You can also do the DHCP reservations changes now @JaredBusch recommends, and change the DHCP lease time now.
-
@dashrender not on here. But in the non profit world we get a yearly allotment especially for Azure. I have used Azure only to spin up a vm or two but mainly just to test how feasible it was.
-
@krisleslie said in UBNT EdgeRouter LAN Config Issue:
@dashrender not on here. But in the non profit world we get a yearly allotment especially for Azure. I have used Azure only to spin up a vm or two but mainly just to test how feasible it was.
Would that yearly allotment include enough space to store your backups?
-
@dashrender last night i dropped all leases lol.
-
@krisleslie said in UBNT EdgeRouter LAN Config Issue:
@dashrender not on here. But in the non profit world we get a yearly allotment especially for Azure. I have used Azure only to spin up a vm or two but mainly just to test how feasible it was.
How about starting a new thread to talk about backups for your situation? Help you keep things separated.
-
@dashrender i will brother. I can say the performance i pray will get better after all the changes.
-
@krisleslie said in UBNT EdgeRouter LAN Config Issue:
@dashrender i will brother. I can say the performance i pray will get better after all the changes.
While you do have a funky setup - I'm not sure I would expect any performance issues from it. Where are you seeing issues?
-
@dashrender yep. Been fixing them as we go. The building we are in, we chose (unfortunately) to reuse wiring and to add new wiring where needed. This building is roughly 50 years old. Been through at least 10 business changes.
I think most issues now are probably due to config more than wiring.
-
@krisleslie said in UBNT EdgeRouter LAN Config Issue:
w wiring where needed. This building is roughly 50 years old. Been through at least 10 business changes.
Right, but what issues in performance are you seeing?
-
@dashrender VOIP has been an issue (we used cable business class). But the router being compromised also lead to failures.
-
Strongly considering swapping to fiber since its finally being rolled out.
-
@krisleslie said in UBNT EdgeRouter LAN Config Issue:
Strongly considering swapping to fiber since its finally being rolled out.
Do it. Latency response times and such are all way better. Generally network monitoring and customer service or better also.
-
@jaredbusch i agree i use to work in a few nocs. I miss our old t1 provider they actively stayed in communication
-
@jaredbusch said in UBNT EdgeRouter LAN Config Issue:
@krisleslie said in UBNT EdgeRouter LAN Config Issue:
Strongly considering swapping to fiber since its finally being rolled out.
Do it. Latency response times and such are all way better. Generally network monitoring and customer service or better also.
This is totally service based.
CenturyLink is deploying fiber but no redundancies (single ring) and aren't offering any of the other typical features of higher cost solutions (like Cox provides locally).
Just make sure you find out what they are offering. -
Stepping back to take another stab at this issue.
@Dashrender from the Edge Router, how should the interface be set up for my LAN?
-
@krisleslie said in UBNT EdgeRouter LAN Config Issue:
Stepping back to take another stab at this issue.
@Dashrender from the Edge Router, how should the interface be set up for my LAN?
ug way back machine here...
you still have devices pointing at multiple /22 IPs for default gateways?
-
Yes and I apologize brother.
I guess for me, I need to break this down into chunks and accomplish specific things first. I'm still a bit "noob".
From the Ubiquiti router, of course, it's been wiped and re-setup. I have one interface still set up with the 10.10.2.x through 4.x from the router.
I'm not clear if moving forward starting from the router, what has to be accomplished.
-
@krisleslie said in UBNT EdgeRouter LAN Config Issue:
Yes and I apologize brother.
I guess for me, I need to break this down into chunks and accomplish specific things first. I'm still a bit "noob".
From the Ubiquiti router, of course, it's been wiped and re-setup. I have one interface still set up with the 10.10.2.x through 4.x from the router.
I'm not clear if moving forward starting from the router, what has to be accomplished.
Got it.
I think from a router standpoint, as long as you have the normal NAT features enabled, you're good to go. Nothing more on the router should be needed. -
So from the router we still have 3 different lans set up. There is 2.x, 3.x and 4.x
I assume the 0.x and 1.x were originally intended to be reserved for the ROBO (kinda backwards). However, because that is an issue in itself for another post Ill let that one go lol
-
@krisleslie said in UBNT EdgeRouter LAN Config Issue:
So from the router we still have 3 different lans set up. There is 2.x, 3.x and 4.x
I assume the 0.x and 1.x were originally intended to be reserved for the ROBO (kinda backwards). However, because that is an issue in itself for another post Ill let that one go lol
Once you start using a /22 on the 2.x network, you'll have instant access to 0.x and 1.x networks.
