Responsive Firewall and external FreePBX users
-
@eddiejennings said in Responsive Firewall and external FreePBX users:
@dashrender said in Responsive Firewall and external FreePBX users:
So, how does a sbc solve that, wouldn't you want to have similar blocks happening on the sbc as you do on the FreePBX?
As I think a bit more, it likely won't, for the reason you mentioned. I'd probably run into the same problem.
You would not run into the same problem because an SBC doesn’t rely on the same mechanisms FreePBX uses for authentication and security. Not only will it solve the problem, using a border element for signaling and/media is the norm in voip.
Think of an SBC as a voip firewall and/or voip router, depending on its configuration. FreePBX does not make one, but Sangoma has for years.
-
Here is a guide to using Sangoma SBC with FreePBX
I use Opensips for signaling and permiter security with Freeswitch, even though freeswitch has domain filtering and sip profiles built in.
I also use Physical Genband and ACME packet SBC’s because they have physical CPU’s that can handle real time transcoding of tens of thousands of sessions concurrently, which a software solution can’t do. That is more typical for trunking but also necessary for things like Office 365 and Skye for Business calling integration.
-
@bigbear said in Responsive Firewall and external FreePBX users:
Think of an SBC as a voip firewall and/or voip router, depending on its configuration.
It's a proxy, not like a firewall or router. A bit different.
-
@scottalanmiller said in Responsive Firewall and external FreePBX users:
@bigbear said in Responsive Firewall and external FreePBX users:
Think of an SBC as a voip firewall and/or voip router, depending on its configuration.
It's a proxy, not like a firewall or router. A bit different.
There are overlapping features and use cases, but they are not one and the same. An SBC can use provide a sip proxy for registration but it is not required.
The real point I guess is that FreePBX currently does not provide a "full compliment" solution for roaming users.
To that end, a SIP Proxy or an SBC that provides a mobile access solution can be used to register roaming devices and then those extensions are registered from the Proxy or SBC to FreePBX as a static IP address, eliminating the need to rely on responsive firewall.
-
@bigbear said in Responsive Firewall and external FreePBX users:
I also use Physical Genband and ACME packet SBC’s because they have physical CPU’s that can handle real time transcoding of tens of thousands of sessions concurrently, which a software solution can’t do. That is more typical for trunking but also necessary for things like Office 365 and Skye for Business calling integration.
I used to believe statements like this, but then I see Scott making statements about Software RAID and how non of the big boys use hardware RAID, only software....soooo... what makes software unable to do this?
-
@bigbear said in Responsive Firewall and external FreePBX users:
@scottalanmiller said in Responsive Firewall and external FreePBX users:
@bigbear said in Responsive Firewall and external FreePBX users:
Think of an SBC as a voip firewall and/or voip router, depending on its configuration.
It's a proxy, not like a firewall or router. A bit different.
There are overlapping features and use cases, but they are not one and the same. An SBC can use provide a sip proxy for registration but it is not required.
The real point I guess is that FreePBX currently does not provide a "full compliment" solution for roaming users.
To that end, a SIP Proxy or an SBC that provides a mobile access solution can be used to register roaming devices and then those extensions are registered from the Proxy or SBC to FreePBX as a static IP address, eliminating the need to rely on responsive firewall.
Any idea why FreePBX doesn't do this? They haven't had time yet to dev it? It's not important to most of their users, as most users of FreePBX aren't mobile users? I'm curious.
-
@dashrender said in Responsive Firewall and external FreePBX users:
@bigbear said in Responsive Firewall and external FreePBX users:
I also use Physical Genband and ACME packet SBC’s because they have physical CPU’s that can handle real time transcoding of tens of thousands of sessions concurrently, which a software solution can’t do. That is more typical for trunking but also necessary for things like Office 365 and Skye for Business calling integration.
I used to believe statements like this, but then I see Scott making statements about Software RAID and how non of the big boys use hardware RAID, only software....soooo... what makes software unable to do this?
Transcoding is VERY different from RAID math. In my video on software and hardware RAID, I talk specifically about how general purpose CPUs do RAID extremely well. And custom RAID hardware doesn't use ASICs, they use general purpose CPUs (normally PowerPCs) that are just low power. Just low end normal CPUs.
Things like Nvidia graphics cards or bitmining machines or transcoding systems use ASICs that are hardware dedicated to the task that they do making them MUCH faster at that one task and practically useless as a normal computer.
So while a hardware SBC might transcode 10,000 calls at once, it would suck for running your big Excel spreadsheet.
-
@dashrender said in Responsive Firewall and external FreePBX users:
@bigbear said in Responsive Firewall and external FreePBX users:
@scottalanmiller said in Responsive Firewall and external FreePBX users:
@bigbear said in Responsive Firewall and external FreePBX users:
Think of an SBC as a voip firewall and/or voip router, depending on its configuration.
It's a proxy, not like a firewall or router. A bit different.
There are overlapping features and use cases, but they are not one and the same. An SBC can use provide a sip proxy for registration but it is not required.
The real point I guess is that FreePBX currently does not provide a "full compliment" solution for roaming users.
To that end, a SIP Proxy or an SBC that provides a mobile access solution can be used to register roaming devices and then those extensions are registered from the Proxy or SBC to FreePBX as a static IP address, eliminating the need to rely on responsive firewall.
Any idea why FreePBX doesn't do this? They haven't had time yet to dev it? It's not important to most of their users, as most users of FreePBX aren't mobile users? I'm curious.
- FreePBX isn't a company, it's a product. So it's like asking "Why doesn't Windows make a Linux product?" The answer is, because it's a product and can't make things. Microsoft can (and does) make UNIX products. Sangoma, who makes FreePBX, is exactly the company that does make this.
- The FreePBX product is a GUI and GUI bundling, not a tech project. They don't make anything even remotely like this. The closest thing that they use is Asterisk, which they don't make, they only include it.
-
@scottalanmiller said in Responsive Firewall and external FreePBX users:
@dashrender said in Responsive Firewall and external FreePBX users:
@bigbear said in Responsive Firewall and external FreePBX users:
@scottalanmiller said in Responsive Firewall and external FreePBX users:
@bigbear said in Responsive Firewall and external FreePBX users:
Think of an SBC as a voip firewall and/or voip router, depending on its configuration.
It's a proxy, not like a firewall or router. A bit different.
There are overlapping features and use cases, but they are not one and the same. An SBC can use provide a sip proxy for registration but it is not required.
The real point I guess is that FreePBX currently does not provide a "full compliment" solution for roaming users.
To that end, a SIP Proxy or an SBC that provides a mobile access solution can be used to register roaming devices and then those extensions are registered from the Proxy or SBC to FreePBX as a static IP address, eliminating the need to rely on responsive firewall.
Any idea why FreePBX doesn't do this? They haven't had time yet to dev it? It's not important to most of their users, as most users of FreePBX aren't mobile users? I'm curious.
- FreePBX isn't a company, it's a product. So it's like asking "Why doesn't Windows make a Linux product?" The answer is, because it's a product and can't make things. Microsoft can (and does) make UNIX products. Sangoma, who makes FreePBX, is exactly the company that does make this.
- The FreePBX product is a GUI and GUI bundling, not a tech project. They don't make anything even remotely like this. The closest thing that they use is Asterisk, which they don't make, they only include it.
To drive home this point @Dashrender, Sangoma already sells this product (the SBC), just as they sell FreePBX.
What are you wanting?
Also, no one, has a simple FOSS SBC that I know of.
-
@dashrender you could see opensips as a software version of this, but in high load scenarios or in transcoding the example @scottalanmiller gives about restricted instruction sets on the video chip is a great example.
If Asterisk was created after SIP standards were made it probably would have some type of domain filtering that would make the mobile issue a very easy fix.
That being said the responsive firewall was a huge leap forward, but i don’t see anything in their big requests that indicates they are going to go further. I’ve not tried to use the Sangoma SBC or to fix the issue since I’ve moved on. I’m guessing the domain for mobile access is very low amongst FreePBX users, or maybe it’s used on desktops inside a LAN that is not using the responsive firewall.
