Testing SnipeIT on Fedora
-
@hobbit666 said in Testing SnipeIT on Fedora:
Is this still the method of getting snipe on Fedora?
Yes. It is in the native repository now. So follow the official instructions, do not use my github.
@hobbit666 said in Testing SnipeIT on Fedora:
How would you do upgrades when new releases come out?
If you are on a new/current version you use
sudo -u apache php /var/www/html/snipeit/upgrade.php
-
I ran the install.sh script on Fedora 28 minimal install.
As far as I know, that takes care of all dependencies, prerequisites, including cloning the SnipeIT git repository and .env configurations.
After install, browsing to the page results in blank white page.
For troubleshooting purposes, i put SELinux in permissive state and gave the whole /var/www/html/snipeit directory 0777 permissions, just to rule out SELinux and permissions.
What else could it be?
-
I think I've got it down now to install a clean setup.
Just waiting to get my Hyper-V server running to do a production VM.Once I do I'll post the steps I did. Might not be the best method but it works well seems to.
-
What I didn't do is install Fedora 28, then immediately run the install script before doing anything else. I'll try that in the meantime. This time I'll be taking a checkpoint of the VM pre-install so I can keep trying.
I'd really like to get this going because it'll save a lot of time having this over using our other system.
If I can get it going in the next few hours that'd be great, otherwise, I'm tryign to do this while I'm waiting on someone to get something else done so I can continue with that which is higher priority. So I'm worried if I can get it working today it'll have to wait... because again, priorities
-
@obsolesce said in Testing SnipeIT on Fedora:
What I didn't do is install Fedora 28, then immediately run the install script before doing anything else. I'll try that in the meantime. This time I'll be taking a checkpoint of the VM pre-install so I can keep trying.
I'd really like to get this going because it'll save a lot of time having this over using our other system.
If I can get it going in the next few hours that'd be great, otherwise, I'm tryign to do this while I'm waiting on someone to get something else done so I can continue with that which is higher priority. So I'm worried if I can get it working today it'll have to wait... because again, priorities
I haven't tried installing Snipe-IT on Fedora using the script. I've only done it manually.
-
@black3dynamite said in Testing SnipeIT on Fedora:
@obsolesce said in Testing SnipeIT on Fedora:
What I didn't do is install Fedora 28, then immediately run the install script before doing anything else. I'll try that in the meantime. This time I'll be taking a checkpoint of the VM pre-install so I can keep trying.
I'd really like to get this going because it'll save a lot of time having this over using our other system.
If I can get it going in the next few hours that'd be great, otherwise, I'm tryign to do this while I'm waiting on someone to get something else done so I can continue with that which is higher priority. So I'm worried if I can get it working today it'll have to wait... because again, priorities
I haven't tried installing Snipe-IT on Fedora using the script. I've only done it manually.
Yeah I was going to do it manually, but I wanted to save time and use the script... jokes on me I guess.
I'm trying it from a 100% fresh install, except for installing wget.
-
Now I'm running into this issue:
https://github.com/snipe/snipe-it/issues/3787#issuecomment-325171989 -
@obsolesce said in Testing SnipeIT on Fedora:
Now I'm running into this issue:
https://github.com/snipe/snipe-it/issues/3787#issuecomment-325171989I think that's the issue they on their website too.
https://snipe-it.readme.io/v4.0/docs/upgrading-to-v4Known Issues Users running MariaDB 10.2.7 and later may have an issue upgrading or installing, due to a change in the way MariaDB stores null defaults. This issue will be fixed once the open pull request in the Doctrine repo is merged and a new version of Doctrine is released with these fixes. You can read more about that issue here.
-
I found a way to get it going... steps incoming...
-
To install Snipe-IT on a fresh Fedora 28 minimal install:
- Install Fedora Server 28 minimal from NetISO.
- Okay to install the typical packages:
dnf install -y wget cockpit cockpit-storaged net-tools dnf-automatic
- Download and run the Snipe-IT install script:
wget https://raw.githubusercontent.com/snipe/snipe-it/master/install.sh
chmod 744 install.sh
./install.sh
- By default, the laravel log has bad permissions and needs to be fixed for Pre-Flight to work:
chmod 0755 /var/www/html/snipeit/storage/logs/laravel.log
chown apache:apache /var/www/html/snipeit/storage/logs/Laravel.log
- By default, you won't be able to send mail with SELinux, allow it to:
setsebool -P httpd_can_network_connect 1
setsebool -P httpd_can_sendmail 1
- Pre-flight will now show and pass. Click the next button, it will fail. Then run this command to fix the DB issue:
reference: https://github.com/snipe/snipe-it/issues/5242#issue-307531010
mysql -u root -p
ALTER TABLE snipeit.assets CHANGE `_snipeit_mac_address` `_snipeit_mac_address_1` varchar(191) CHARACTER SET utf8mb4 COLLATE utf8mb4_unicode_ci DEFAULT NULL NULL ;
Now go back to the Pre-flight page, and it should continue on as normal.
-
What permissions should the .env file be set to?
As when I've done the manual git clone method the preflight keeps telling me to make sure it's protected from the outside world
-
@hobbit666 said in Testing SnipeIT on Fedora:
What permissions should the .env file be set to?
As when I've done the manual git clone method the preflight keeps telling me to make sure it's protected from the outside world
640 should be fine.
Are you able to browse to the .env file on your web browser? You should get a 404 when trying to.
-
@obsolesce it seemed to do that no matter what I set the permissions to
-
@obsolesce Gives me a oops something went wrong so guess it's alright.
-
@obsolesce Are you using MariaDB or MySQL? Also what versions.
I'm getting SQL Syntax errors on the pre-flight but looking on line i can see a post about version 10.2 causing issues.
-
Even the install script seem to be giving me jip as well.
SQLSTATE[42000]: Syntax error or access violation: 1064 You have an error in your SQL syntax; check the manual that corresponds to your MariaDB server version for the right syntax to use near '''' at line 1 (SQL: ALTER TABLE assets CHANGE _snipeit_mac_address _snipeit_mac_address_1 VARCHAR(191) DEFAULT ''NULL'')
-
@hobbit666 said in Testing SnipeIT on Fedora:
@obsolesce Are you using MariaDB or MySQL? Also what versions.
I'm getting SQL Syntax errors on the pre-flight but looking on line i can see a post about version 10.2 causing issues.
Even the install script seem to be giving me jip as well.
SQLSTATE[42000]: Syntax error or access violation: 1064 You have an error in your SQL syntax; check the manual that corresponds to your MariaDB server version for the right syntax to use near '''' at line 1 (SQL: ALTER TABLE assets CHANGE _snipeit_mac_address _snipeit_mac_address_1 VARCHAR(191) DEFAULT ''NULL'')
Oops should have looks up a bit can see @Obsolesce has already posted about this
-
@hobbit666 said in Testing SnipeIT on Fedora:
@obsolesce Are you using MariaDB or MySQL? Also what versions.
I'm getting SQL Syntax errors on the pre-flight but looking on line i can see a post about version 10.2 causing issues.
MariaDB, latest repo version... 10.2.
Look at #6 here:
@obsolesce said in Testing SnipeIT on Fedora:
To install Snipe-IT on a fresh Fedora 28 minimal install:
- Install Fedora Server 28 minimal from NetISO.
- Okay to install the typical packages:
dnf install -y wget cockpit cockpit-storaged net-tools dnf-automatic
- Download and run the Snipe-IT install script:
wget https://raw.githubusercontent.com/snipe/snipe-it/master/install.sh
chmod 744 install.sh
./install.sh
- By default, the laravel log has bad permissions and needs to be fixed for Pre-Flight to work:
chmod 0755 /var/www/html/snipeit/storage/logs/laravel.log
chown apache:apache /var/www/html/snipeit/storage/logs/Laravel.log
- By default, you won't be able to send mail with SELinux, allow it to:
setsebool -P httpd_can_network_connect 1
setsebool -P httpd_can_sendmail 1
- Pre-flight will now show and pass. Click the next button, it will fail. Then run this command to fix the DB issue:
reference: https://github.com/snipe/snipe-it/issues/5242#issue-307531010
mysql -u root -p
ALTER TABLE snipeit.assets CHANGE `_snipeit_mac_address` `_snipeit_mac_address_1` varchar(191) CHARACTER SET utf8mb4 COLLATE utf8mb4_unicode_ci DEFAULT NULL NULL ;
Now go back to the Pre-flight page, and it should continue on as normal.
-
@obsolesce Yeah did your Alter table and i'm up and running and also imported my data from the old version.
Now to get it to work from behind a NGINX proxy
-
Now got issues adding machines, or doing anything add/edit wise. While in debug can see it all relating to the SQL stuff.
Guess its down to how i've exported and imported the database.