SnipeIT - Connection Refused

DustinB3403

@travisdh1 said in SnipeIT - Connection Refused:

@dustinb3403 said in SnipeIT - Connection Refused:

@travisdh1 said in SnipeIT - Connection Refused:

@dustinb3403 said in SnipeIT - Connection Refused:

@travisdh1 Centos 7

Of course, one I don't have conveniently running at the moment

Well hop to it Minimal is only 680 MB

Yeah, and my home lab will do a netinstall in no time flat once I get around to it.

VirtualBox is only seconds away. . .

DustinB3403

httpd is the only service failing. . .

[ ~]$ systemctl status httpd
● httpd.service - The Apache HTTP Server
   Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled; vendor preset: disabled)
   Active: failed (Result: exit-code) since Mon 2017-08-14 16:50:07 EDT; 9min ago
	 Docs: man:httpd(8)
		   man:apachectl(8)
  Process: 1334 ExecStop=/bin/kill -WINCH ${MAINPID} (code=exited, status=1/FAILURE)
  Process: 903 ExecStart=/usr/sbin/httpd $OPTIONS -DFOREGROUND (code=exited, status=1/FAILURE)
 Main PID: 903 (code=exited, status=1/FAILURE)

[ ~]$ systemctl status mariadb
● mariadb.service - MariaDB database server
   Loaded: loaded (/usr/lib/systemd/system/mariadb.service; enabled; vendor preset: disabled)
   Active: active (running) since Mon 2017-08-14 16:50:10 EDT; 9min ago
  Process: 1053 ExecStartPost=/usr/libexec/mariadb-wait-ready $MAINPID (code=exited, status=0/SUCCESS)
  Process: 899 ExecStartPre=/usr/libexec/mariadb-prepare-db-dir %n (code=exited, status=0/SUCCESS)
 Main PID: 1052 (mysqld_safe)
   CGroup: /system.slice/mariadb.service
		   ├─1052 /bin/sh /usr/bin/mysqld_safe --basedir=/usr
		   └─1306 /usr/libexec/mysqld --basedir=/usr --datadir=/var/lib/mysql --plugin-dir=/usr/lib64/mysql/plugin --log-error=/var/log/mariad...

DustinB3403

Setenforce 0

(AKA I can access the system) . . . so now how to configure it so this system isn't wide open. . .

travisdh1

@dustinb3403 said in SnipeIT - Connection Refused:

Setenforce 0
(AKA I can access the system) . . . so now how to configure it so this system isn't wide open. . .

Oh, that's in @JaredBusch's guides to setting up NextCloud... I bet you get it looked up before I find it

DustinB3403

@travisdh1 said in SnipeIT - Connection Refused:

@dustinb3403 said in SnipeIT - Connection Refused:
Setenforce 0
(AKA I can access the system) . . . so now how to configure it so this system isn't wide open. . .
Oh, that's in @JaredBusch's guides to setting up NextCloud... I bet you get it looked up before I find it

Found the guide. It was never updated with setenforce info.

JaredBusch

@dustinb3403 said in SnipeIT - Connection Refused:

@travisdh1 said in SnipeIT - Connection Refused:
@dustinb3403 said in SnipeIT - Connection Refused:
Setenforce 0
(AKA I can access the system) . . . so now how to configure it so this system isn't wide open. . .
Oh, that's in @JaredBusch's guides to setting up NextCloud... I bet you get it looked up before I find it
Found the guide. It was never updated with setenforce info.

Your problem is because somewhere along the way the old guides for Snipe said to setenforce 0 during install.

But Snipe's installer actually checks for SELinux to be enforcing and then sets the required contexts. So because the guide said to install with it off, the installer never set the contexts.

I found this when I figured out how to change the installer to use git. Lemme go dig that out.

JaredBusch

@DustinB3403
https://mangolassi.it/post/323040

This is where we talked about this.

Let me go hit my github and pull out the command without variables.

travisdh1

@jaredbusch "setenforce 0" always the lazy way out.

DustinB3403

@travisdh1 said in SnipeIT - Connection Refused:

@jaredbusch "setenforce 0" always the lazy way out.

That is what I did for the moment, just to test. But I would like to allow only the services that are required of the system.

Is there no way to specify httpd as being allowed through setenforce?

JaredBusch

Straight from the install script.
By default this should be what was done.

#Sets SELinux context type so that scripts running in the web server process are allowed read/write access
chcon -R -h -t httpd_sys_script_rw_t /var/www/html/snipeit

Turn SELinux back on

setenforce 1

The restart Apache

systemctl restart httpd

DustinB3403

@jaredbusch said in SnipeIT - Connection Refused:

Straight from the install script.
By default this should be what was done.
#Sets SELinux context type so that scripts running in the web server process are allowed read/write access
chcon -R -h -t httpd_sys_script_rw_t /var/www/html/snipeit
Turn SELinux back on
setenforce 1
The restart Apache
systemctl restart httpd

That didn't work.

JaredBusch

@dustinb3403 said in SnipeIT - Connection Refused:

@jaredbusch said in SnipeIT - Connection Refused:
Straight from the install script.
By default this should be what was done.
#Sets SELinux context type so that scripts running in the web server process are allowed read/write access
chcon -R -h -t httpd_sys_script_rw_t /var/www/html/snipeit
Turn SELinux back on
setenforce 1
The restart Apache
systemctl restart httpd
That didn't work.

Was wondering, because that is not how I learned to change that in ownCloud. Sec.

DustinB3403

@JaredBusch one sec, it may have just needed to be stopped completely.

DustinB3403

We're up and running.

OKAY @JaredBusch go bitch slap the SnipeIT team. . .

JaredBusch

@dustinb3403 said in SnipeIT - Connection Refused:

@JaredBusch one sec, it may have just needed to be stopped completely.

Well check your context with

ls -laZ /var/www/html

should look like this:

drwxr-xr-x. apache apache unconfined_u:object_r:httpd_sys_rw_content_t:s0 snipeit

JaredBusch

@dustinb3403 said in SnipeIT - Connection Refused:

We're up and running.

OKAY @JaredBusch go bitch slap the SnipeIT team. . .

The pertinent question is, was the setenforce 0 in their guide or the script on here?

DustinB3403

@jaredbusch said in SnipeIT - Connection Refused:

ls -laZ /var/www/html

It does, I think we're in good shape.

JaredBusch

@jaredbusch said in SnipeIT - Connection Refused:

@dustinb3403 said in SnipeIT - Connection Refused:

We're up and running.

OKAY @JaredBusch go bitch slap the SnipeIT team. . .

The pertinent question is, was the setenforce 0 in their guide or the script on here?

It looks like @scottalanmiller's original post has the setenforce 0 in it. So the question is where did he get it from?

https://mangolassi.it/topic/6967/installing-snipe-it-on-centos-7-and-mariadb/1

DustinB3403

@jaredbusch said in SnipeIT - Connection Refused:

@dustinb3403 said in SnipeIT - Connection Refused:

We're up and running.

OKAY @JaredBusch go bitch slap the SnipeIT team. . .

The pertinent question is, was the setenforce 0 in their guide or the script on here?

That I honestly don't recall. I probably used an installation guide here on ML, as the information from their site is pretty bad.

DustinB3403

For a little necormancy

This issue came back again, thought I had resolved it after the last time.

Well this time I've got it set.

setsebool -P httpd_can_connect_ldap on
chcon -R -h -t httpd_sys_script_rw_t /var/www/html/snipeit/

sealert (which I had to install) showed I needed this as well

ausearch -c 'httpd' --raw | audit2allow -M my-httpd
semodule -i my-httpd.pp

Once done, reboot and check is httpd (apache) is running. For me it was.

Solved SnipeIT - Connection Refused