Call flow puzzle
-
@jaredbusch said in Call flow puzzle:
@eddiejennings said in Call flow puzzle:
@jaredbusch Apparently so. On first glance, the solution would probably be to train users to just sign-in and out of the queue when they're on duty.
Using a queue that the users signs into and out of would be the best option as it would simplify it all to "dump call to queue" that would fail to a ring group that only contains the manager that would then fail to departmental voicemail.
Irony = the original itent of the post was literally saying "this is what I'm doing right now" and then I go off and think stuff through, but as your rightfully noticed, there's no way to resist having a discussion
On the task at hand, I agree with your suggestion. Knowing the users will likely gripe and moan about having to log in and out, I was looking to see if you can have some kind of time-based logic. From what I can see, it looks like the time groups / conditions are more for like automatically sending all calls to the after-hours message, etc, rather than for fine-grained stuff like this puzzle.
If you're curious as to what happens now, all of these folks are in a huntgroup (that more like a ring group) where every extension rings every time, and they've just trained themselves to know when they should answer. -- Design was done far before my time.
-
@eddiejennings did a little poking at FreePBX 14 to make sure nothing changed.
Your best best for simple from the PBX flow side is definitely going to be a Queue that fails to a Ring Group that fails to Voicemail.
There is no easy answer from a user point of view. They can listen to the calls ring like now or log in and out of a Queue.
The simple answer for the users is the over complicated tech answer of creating a bunch of time groups and time conditions and call flow controls.
-
This seems like a possible solution using time conditions. It would involve User 5, the floating user, to log in and out of the appropriate queue. Would also require configuring two queues and three ring groups, rather than one queue, and one ring group. On the positive side (for the users), Users 1-4, wouldn't have to do anything.
-
@eddiejennings said in Call flow puzzle:
This seems like a possible solution using time conditions. It would involve User 5, the floating user, to log in and out of the appropriate queue. Would also require configuring two queues and three ring groups, rather than one queue, and one ring group. On the positive side (for the users), Users 1-4, wouldn't have to do anything.
That is a decent flow with only a single user interaction needed.
You can program a BLF for each queue on that users phone to log in and out of the queue, so they will have positive visual confirmation that they are in the queue or not.
*451111*2222
Where 1111 = Queue# and 2222 = Ext# -
Win for IT! I walked the department head who requested this queue logic through the flow chart, and she thought it was fine (even with that one user logging in and out of a queue).
-
@jaredbusch said in Call flow puzzle:
@eddiejennings said in Call flow puzzle:
This seems like a possible solution using time conditions. It would involve User 5, the floating user, to log in and out of the appropriate queue. Would also require configuring two queues and three ring groups, rather than one queue, and one ring group. On the positive side (for the users), Users 1-4, wouldn't have to do anything.
That is a decent flow with only a single user interaction needed.
You can program a BLF for each queue on that users phone to log in and out of the queue, so they will have positive visual confirmation that they are in the queue or not.
*451111*2222
Where 1111 = Queue# and 2222 = Ext#I was testing this today. In order for me to get it to work, I had to make 1111 the extension number and 2222 the queue number.
-
@eddiejennings said in Call flow puzzle:
@jaredbusch said in Call flow puzzle:
@eddiejennings said in Call flow puzzle:
This seems like a possible solution using time conditions. It would involve User 5, the floating user, to log in and out of the appropriate queue. Would also require configuring two queues and three ring groups, rather than one queue, and one ring group. On the positive side (for the users), Users 1-4, wouldn't have to do anything.
That is a decent flow with only a single user interaction needed.
You can program a BLF for each queue on that users phone to log in and out of the queue, so they will have positive visual confirmation that they are in the queue or not.
*451111*2222
Where 1111 = Queue# and 2222 = Ext#I was testing this today. In order for me to get it to work, I had to make 1111 the extension number and 2222 the queue number.
Maybe I typed it backwards? I did not log into a system to verify that.
-
@jaredbusch said in Call flow puzzle:
@eddiejennings said in Call flow puzzle:
@jaredbusch said in Call flow puzzle:
@eddiejennings said in Call flow puzzle:
This seems like a possible solution using time conditions. It would involve User 5, the floating user, to log in and out of the appropriate queue. Would also require configuring two queues and three ring groups, rather than one queue, and one ring group. On the positive side (for the users), Users 1-4, wouldn't have to do anything.
That is a decent flow with only a single user interaction needed.
You can program a BLF for each queue on that users phone to log in and out of the queue, so they will have positive visual confirmation that they are in the queue or not.
*451111*2222
Where 1111 = Queue# and 2222 = Ext#I was testing this today. In order for me to get it to work, I had to make 1111 the extension number and 2222 the queue number.
Maybe I typed it backwards? I did not log into a system to verify that.
FFS what are you doing helping people
-
@dashrender said in Call flow puzzle:
@jaredbusch said in Call flow puzzle:
@eddiejennings said in Call flow puzzle:
@jaredbusch said in Call flow puzzle:
@eddiejennings said in Call flow puzzle:
This seems like a possible solution using time conditions. It would involve User 5, the floating user, to log in and out of the appropriate queue. Would also require configuring two queues and three ring groups, rather than one queue, and one ring group. On the positive side (for the users), Users 1-4, wouldn't have to do anything.
That is a decent flow with only a single user interaction needed.
You can program a BLF for each queue on that users phone to log in and out of the queue, so they will have positive visual confirmation that they are in the queue or not.
*451111*2222
Where 1111 = Queue# and 2222 = Ext#I was testing this today. In order for me to get it to work, I had to make 1111 the extension number and 2222 the queue number.
Maybe I typed it backwards? I did not log into a system to verify that.
FFS what are you doing helping people
Jared's FreePBX words are so authoritative, I honestly though I must've had a config problem causing me to have to use his command backwards.
-
@eddiejennings said in Call flow puzzle:
@dashrender said in Call flow puzzle:
@jaredbusch said in Call flow puzzle:
@eddiejennings said in Call flow puzzle:
@jaredbusch said in Call flow puzzle:
@eddiejennings said in Call flow puzzle:
This seems like a possible solution using time conditions. It would involve User 5, the floating user, to log in and out of the appropriate queue. Would also require configuring two queues and three ring groups, rather than one queue, and one ring group. On the positive side (for the users), Users 1-4, wouldn't have to do anything.
That is a decent flow with only a single user interaction needed.
You can program a BLF for each queue on that users phone to log in and out of the queue, so they will have positive visual confirmation that they are in the queue or not.
*451111*2222
Where 1111 = Queue# and 2222 = Ext#I was testing this today. In order for me to get it to work, I had to make 1111 the extension number and 2222 the queue number.
Maybe I typed it backwards? I did not log into a system to verify that.
FFS what are you doing helping people
Jared's FreePBX words are so authoritative, I honestly though I must've had a config problem causing me to have to use his command backwards.
Yeah, I wonder where I was responding from that day.
Because I just took a whole 60 seconds to SSH into a PBX and check..
[root@bpbx tftpboot]# grep *45 * 001565593cfd.cfg:linekey.13.value = *455153*5151 001565593e05.cfg:linekey.13.value = *455155*5151 0015655949b5.cfg:linekey.13.value = *455152*5151 00156572df55.cfg:linekey.13.value = *455154*5151 001565944ab7.cfg:linekey.13.value = *455153*5151
