Managing Hyper-V
-
oVirt should be run on CentOS. It's the upstream for RHEV.
Mist.io also does KVM management.
I don't use web interfaces for KVM. Either CLI or virt-Manager through SSH.
-
@Tim_G said in Managing Hyper-V:
Turns out, WebVirtMgr was too good to be true. I couldn't get it working on Fedora 26 or Fedora 25. Hours wasted.
Tried installing WebVirtMgr too...I also gave up
I looked at Proxmox, but that's a Debian "appliance". I'm not using Debian in enterprise and don't want to. No time wasted, didn't bother.
oVirt wouldn't even install on Fedora 26 or 25. Apparently it's built for Fedora 24, I'm not going there. Even then, it doesn't seem like it would install. Time wasted trying to get it working. Packages were updated as of yesterday, so I was thinking they would work. I was wrong.
oVirt does work but you need to use the oVirt installer iso (it's based on CentOS 7.x)
What paid options for managing KVM have you found (the interesting looking ones)?
-
@FATeknollogee said in Managing Hyper-V:
@Tim_G said in Managing Hyper-V:
Turns out, WebVirtMgr was too good to be true. I couldn't get it working on Fedora 26 or Fedora 25. Hours wasted.
Tried installing WebVirtMgr too...I also gave up
I looked at Proxmox, but that's a Debian "appliance". I'm not using Debian in enterprise and don't want to. No time wasted, didn't bother.
oVirt wouldn't even install on Fedora 26 or 25. Apparently it's built for Fedora 24, I'm not going there. Even then, it doesn't seem like it would install. Time wasted trying to get it working. Packages were updated as of yesterday, so I was thinking they would work. I was wrong.
oVirt does work but you need to use the oVirt installer iso (it's based on CentOS 7.x)
What paid options for managing KVM have you found (the interesting looking ones)?
Scale is a management interface (and more) for KVM.
-
Eucalyptus is a paid one.
I think ManageIQ (upstream of CloudForms) has a libvirt provider, but I'm not sure how well it works.
-
@scottalanmiller said in Managing Hyper-V:
Scale is a management interface (and more) for KVM.
Can Scale (the interface) be used to manage anything that doesn't involve Scale (the hardware)?
-
@FATeknollogee said in Managing Hyper-V:
@scottalanmiller said in Managing Hyper-V:
Scale is a management interface (and more) for KVM.
Can Scale (the interface) be used to manage anything that doesn't involve Scale (the hardware)?
Not that I'm aware of. The Scale interface only runs and works on the Scale systems.
-
-
@FATeknollogee said in Managing Hyper-V:
@scottalanmiller said in Managing Hyper-V:
Scale is a management interface (and more) for KVM.
Can Scale (the interface) be used to manage anything that doesn't involve Scale (the hardware)?
No, it's appliances only. The KVM is included in the appliance.
-
@scottalanmiller said in Managing Hyper-V:
@stacksofplates said in Managing Hyper-V:
Eucalyptus is a paid one.
It's free, too. Or was.
Ah I didn't realize that.
I thought it was the HPE one but that's something else.
-
Well that's confusing. There is two Eucalyptus products. One from HPE and one from DXC. That's why I thought it was paid only, I didn't realize there was another one.
-
Ah looks like HPE bought it and then discontinued development? Idk
-
@stacksofplates said in Managing Hyper-V:
@scottalanmiller said in Managing Hyper-V:
@stacksofplates said in Managing Hyper-V:
Eucalyptus is a paid one.
It's free, too. Or was.
Ah I didn't realize that.
I thought it was the HPE one but that's something else.
It was an open source cloud project around 2003. It was a clone of AWS (which came out in 2002.) it was the first private cloud project.
-
@stacksofplates said in Managing Hyper-V:
Ah looks like HPE bought it and then discontinued development? Idk
Argh. Not surprising. Really with OpenStack, it didn't make much sense after that.
-
@Dashrender said in Managing Hyper-V:
I know Scott has argued for not putting the Hyper-V hosts into the domain at all, it's one less point of failure for the Hyper-V hosts.
But, if you do that, making connections to other domain connected file servers are challenging at least, and impossible at best - when being managed remotely due to delegation of authentication being passed from the management PC through the Hyper-V host to the domain connected resources.
We haven't actually tested this setup yet, so we don't know that it's impossible, but we do know it will be a challenge at the least.
I have been out of the hypervisor world for a minute but I never want that layer joined to a domain. However I have no experience managing larger deployments. Just seems like added stress.
-
@bigbear said in Managing Hyper-V:
@Dashrender said in Managing Hyper-V:
I know Scott has argued for not putting the Hyper-V hosts into the domain at all, it's one less point of failure for the Hyper-V hosts.
But, if you do that, making connections to other domain connected file servers are challenging at least, and impossible at best - when being managed remotely due to delegation of authentication being passed from the management PC through the Hyper-V host to the domain connected resources.
We haven't actually tested this setup yet, so we don't know that it's impossible, but we do know it will be a challenge at the least.
I have been out of the hypervisor world for a minute but I never want that layer joined to a domain. However I have no experience managing larger deployments. Just seems like added stress.
All of my Hyper-V deployments are currently on Windows AD based networks so I always join the Hyper-V to the domain for simpler connectivity. There is no downside to it any more than any other server that is domain joined.
-
@FATeknollogee said in Managing Hyper-V:
@Tim_G said in Managing Hyper-V:
Turns out, WebVirtMgr was too good to be true. I couldn't get it working on Fedora 26 or Fedora 25. Hours wasted.
Tried installing WebVirtMgr too...I also gave up
I looked at Proxmox, but that's a Debian "appliance". I'm not using Debian in enterprise and don't want to. No time wasted, didn't bother.
oVirt wouldn't even install on Fedora 26 or 25. Apparently it's built for Fedora 24, I'm not going there. Even then, it doesn't seem like it would install. Time wasted trying to get it working. Packages were updated as of yesterday, so I was thinking they would work. I was wrong.
oVirt does work but you need to use the oVirt installer iso (it's based on CentOS 7.x)
What paid options for managing KVM have you found (the interesting looking ones)?
Webvirtman runs in a virtualenv. Never got issues with it. But it doenst fit me.
-
@bigbear said in Managing Hyper-V:
@Dashrender said in Managing Hyper-V:
I know Scott has argued for not putting the Hyper-V hosts into the domain at all, it's one less point of failure for the Hyper-V hosts.
But, if you do that, making connections to other domain connected file servers are challenging at least, and impossible at best - when being managed remotely due to delegation of authentication being passed from the management PC through the Hyper-V host to the domain connected resources.
We haven't actually tested this setup yet, so we don't know that it's impossible, but we do know it will be a challenge at the least.
I have been out of the hypervisor world for a minute but I never want that layer joined to a domain. However I have no experience managing larger deployments. Just seems like added stress.
If you have an domain in placed, you minds well take advantage of having the hypervisor joined too.
Now with Hyper-V 2016 and Windows 10 it is a lot easier to setup in a workgroup compare to 2012 r2.
-
@Tim_G My annoyance with Proxmox is the need to change the repo from enterprise to the no subscription repo.
I don't really have an issue with them using Debian because majority of time is spent on the
webui.I do wonder why they don't use Fedora unless they are more familiar with Debian.
-
@JaredBusch in the case of the domain being down can you still log in locally?
-
@bigbear ad credentials cached afaik
