Firewalls & Restricting Outbound Traffic
-
Ok, so perhaps the discussion should be...which ports would you blanket block?
-
@anthonyh said in Firewalls & Restricting Outbound Traffic:
Ok, so perhaps the discussion should be...which ports would you blanket block?
- That's it. And it is blocked on every network I have ever had access to the core router of.
-
@JaredBusch said in Firewalls & Restricting Outbound Traffic:
@anthonyh said in Firewalls & Restricting Outbound Traffic:
Ok, so perhaps the discussion should be...which ports would you blanket block?
- That's it. And it is blocked on every network I have ever had access to the core router of.
You wouldn't want to force DNS at least, too? I'm liking the idea that DNS requests must be made by my DCs. Maybe it's not necessary.
-
@anthonyh said in Firewalls & Restricting Outbound Traffic:
@JaredBusch said in Firewalls & Restricting Outbound Traffic:
@anthonyh said in Firewalls & Restricting Outbound Traffic:
Ok, so perhaps the discussion should be...which ports would you blanket block?
- That's it. And it is blocked on every network I have ever had access to the core router of.
You wouldn't want to force DNS at least, too? I'm liking the idea that DNS requests must be made by my DCs. Maybe it's not necessary.
That is not an IT blanket decision.
That is a company policy decision.
-
@anthonyh said in Firewalls & Restricting Outbound Traffic:
Who said I wasn't thinking? It's the whole reason I started this post...to get discussion on something I'm brainstorming. Good information nonetheless.
I was not specifically saying you were not. I tend to generalize because while it is a response to your thread, this is a broader discussion.
BTW, I do not think that I cannot open the TeamViewer port...it was simipy a "can I get away with it using the alternate 80/443?" If not, then I'd open the port.
If you went this route, you simply open it. You do not block it and open it if there is a problem.
-
@anthonyh said in Firewalls & Restricting Outbound Traffic:
Ok, so perhaps the discussion should be...which ports would you blanket block?
Just 25 under normal circumstances, and not because it send out our data but because it is a means of being a spam host, a slightly unique case and pretty much the only one that involved port blocking as an effective method of stopping something.
-
@anthonyh said in Firewalls & Restricting Outbound Traffic:
@JaredBusch said in Firewalls & Restricting Outbound Traffic:
@anthonyh said in Firewalls & Restricting Outbound Traffic:
Ok, so perhaps the discussion should be...which ports would you blanket block?
- That's it. And it is blocked on every network I have ever had access to the core router of.
You wouldn't want to force DNS at least, too? I'm liking the idea that DNS requests must be made by my DCs. Maybe it's not necessary.
Are there cases for that? Okay. But you already control that in other ways. So I'm unclear what benefit you think that this will provide since you are talking about malware, not your users. Does malware looking things up on your DC provide some value to you?
-
@scottalanmiller said in Firewalls & Restricting Outbound Traffic:
@anthonyh said in Firewalls & Restricting Outbound Traffic:
@JaredBusch said in Firewalls & Restricting Outbound Traffic:
@anthonyh said in Firewalls & Restricting Outbound Traffic:
Ok, so perhaps the discussion should be...which ports would you blanket block?
- That's it. And it is blocked on every network I have ever had access to the core router of.
You wouldn't want to force DNS at least, too? I'm liking the idea that DNS requests must be made by my DCs. Maybe it's not necessary.
Are there cases for that? Okay. But you already control that in other ways. So I'm unclear what benefit you think that this will provide since you are talking about malware, not your users. Does malware looking things up on your DC provide some value to you?
We have a log collector that does DNS analysis. So, yes, it does actually. And if I decided to "black hole" a DNS record (have done this as past jobs, but not this one yet), there would be no way around it.
-
Let's ask another question... we've all had port blocking for decades, this is not a new feature. Is anyone port blocking? If so, why? Has it ever had benefits?
I've worked for places that port blocked, but it was solely because they didn't want their users to be able to do anything. Which if that is your goal, okay. But it clearly is not, you want your users to be able to do things that they want to do, which I totally support. But I don't know what the purpose of the port blocking would be then since we've always been able to do it and never found it valuable before. Why start doing it now in an era where the value to doing so is gone when we didn't when there used to be some value to it.
-
@anthonyh said in Firewalls & Restricting Outbound Traffic:
@scottalanmiller said in Firewalls & Restricting Outbound Traffic:
@anthonyh said in Firewalls & Restricting Outbound Traffic:
@JaredBusch said in Firewalls & Restricting Outbound Traffic:
@anthonyh said in Firewalls & Restricting Outbound Traffic:
Ok, so perhaps the discussion should be...which ports would you blanket block?
- That's it. And it is blocked on every network I have ever had access to the core router of.
You wouldn't want to force DNS at least, too? I'm liking the idea that DNS requests must be made by my DCs. Maybe it's not necessary.
Are there cases for that? Okay. But you already control that in other ways. So I'm unclear what benefit you think that this will provide since you are talking about malware, not your users. Does malware looking things up on your DC provide some value to you?
We have a log collector that does DNS analysis. So, yes, it does actually. And if I decided to "black hole" a DNS record (have done this as past jobs, but not this one yet), there would be no way around it.
You think that malware would have no way around it? It would just use port 80 or 443. There is always a way around it.
-
@scottalanmiller said in Firewalls & Restricting Outbound Traffic:
@anthonyh said in Firewalls & Restricting Outbound Traffic:
@scottalanmiller said in Firewalls & Restricting Outbound Traffic:
@anthonyh said in Firewalls & Restricting Outbound Traffic:
@JaredBusch said in Firewalls & Restricting Outbound Traffic:
@anthonyh said in Firewalls & Restricting Outbound Traffic:
Ok, so perhaps the discussion should be...which ports would you blanket block?
- That's it. And it is blocked on every network I have ever had access to the core router of.
You wouldn't want to force DNS at least, too? I'm liking the idea that DNS requests must be made by my DCs. Maybe it's not necessary.
Are there cases for that? Okay. But you already control that in other ways. So I'm unclear what benefit you think that this will provide since you are talking about malware, not your users. Does malware looking things up on your DC provide some value to you?
We have a log collector that does DNS analysis. So, yes, it does actually. And if I decided to "black hole" a DNS record (have done this as past jobs, but not this one yet), there would be no way around it.
You think that malware would have no way around it? It would just use port 80 or 443. There is always a way around it.
I suppose that's true. They could also go out another random port since none of it would be blocked.
-
@anthonyh said in Firewalls & Restricting Outbound Traffic:
@scottalanmiller said in Firewalls & Restricting Outbound Traffic:
@anthonyh said in Firewalls & Restricting Outbound Traffic:
@scottalanmiller said in Firewalls & Restricting Outbound Traffic:
@anthonyh said in Firewalls & Restricting Outbound Traffic:
@JaredBusch said in Firewalls & Restricting Outbound Traffic:
@anthonyh said in Firewalls & Restricting Outbound Traffic:
Ok, so perhaps the discussion should be...which ports would you blanket block?
- That's it. And it is blocked on every network I have ever had access to the core router of.
You wouldn't want to force DNS at least, too? I'm liking the idea that DNS requests must be made by my DCs. Maybe it's not necessary.
Are there cases for that? Okay. But you already control that in other ways. So I'm unclear what benefit you think that this will provide since you are talking about malware, not your users. Does malware looking things up on your DC provide some value to you?
We have a log collector that does DNS analysis. So, yes, it does actually. And if I decided to "black hole" a DNS record (have done this as past jobs, but not this one yet), there would be no way around it.
You think that malware would have no way around it? It would just use port 80 or 443. There is always a way around it.
I suppose that's true. They could also go out another random port since none of it would be blocked.
If you block ALL ports, then you can make cases for all kinds of stuff. But leave any open, and you might as well leave them all open, except for 25.
-
@scottalanmiller said in Firewalls & Restricting Outbound Traffic:
@anthonyh said in Firewalls & Restricting Outbound Traffic:
@JaredBusch said in Firewalls & Restricting Outbound Traffic:
@anthonyh said in Firewalls & Restricting Outbound Traffic:
Ok, so perhaps the discussion should be...which ports would you blanket block?
- That's it. And it is blocked on every network I have ever had access to the core router of.
You wouldn't want to force DNS at least, too? I'm liking the idea that DNS requests must be made by my DCs. Maybe it's not necessary.
Are there cases for that? Okay. But you already control that in other ways. So I'm unclear what benefit you think that this will provide since you are talking about malware, not your users. Does malware looking things up on your DC provide some value to you?
You cannot force client DNS 100% of the time to be what you want in a BYOD environment. If DNS control is a desire, blocking DNS at the router is the simpler method.
It is unrelated to the blanket blocking discussion as it is a decision the business needs to decide if they need to make or not.
-
@JaredBusch said in Firewalls & Restricting Outbound Traffic:
@scottalanmiller said in Firewalls & Restricting Outbound Traffic:
@anthonyh said in Firewalls & Restricting Outbound Traffic:
@JaredBusch said in Firewalls & Restricting Outbound Traffic:
@anthonyh said in Firewalls & Restricting Outbound Traffic:
Ok, so perhaps the discussion should be...which ports would you blanket block?
- That's it. And it is blocked on every network I have ever had access to the core router of.
You wouldn't want to force DNS at least, too? I'm liking the idea that DNS requests must be made by my DCs. Maybe it's not necessary.
Are there cases for that? Okay. But you already control that in other ways. So I'm unclear what benefit you think that this will provide since you are talking about malware, not your users. Does malware looking things up on your DC provide some value to you?
You cannot force client DNS 100% of the time to be what you want in a BYOD environment. If DNS control is a desire, blocking DNS at the router is the simpler method.
It is unrelated to the blanket blocking discussion as it is a decision the business needs to decide if they need to make or not.
What's the difference between blocking DNS at the router vs firewall? The idea being only permitted DNS servers would be allowed to perform DNS requests to the outside world. Everything on the inside would need to use the on premis DNS servers (aka our DCs).
-
@anthonyh said in Firewalls & Restricting Outbound Traffic:
What's the difference between blocking DNS at the router vs firewall?
Those are the same thing. All routers on the market for the last two decades is a firewall. And all firewalls that I know of are routers. Since the late 1990s, while a router and firewall are different functions and aspects, all real world products are always both. So those terms are actually interchangeable unless you are discussing the functionality.
-
@anthonyh said in Firewalls & Restricting Outbound Traffic:
@JaredBusch said in Firewalls & Restricting Outbound Traffic:
@scottalanmiller said in Firewalls & Restricting Outbound Traffic:
@anthonyh said in Firewalls & Restricting Outbound Traffic:
@JaredBusch said in Firewalls & Restricting Outbound Traffic:
@anthonyh said in Firewalls & Restricting Outbound Traffic:
Ok, so perhaps the discussion should be...which ports would you blanket block?
- That's it. And it is blocked on every network I have ever had access to the core router of.
You wouldn't want to force DNS at least, too? I'm liking the idea that DNS requests must be made by my DCs. Maybe it's not necessary.
Are there cases for that? Okay. But you already control that in other ways. So I'm unclear what benefit you think that this will provide since you are talking about malware, not your users. Does malware looking things up on your DC provide some value to you?
You cannot force client DNS 100% of the time to be what you want in a BYOD environment. If DNS control is a desire, blocking DNS at the router is the simpler method.
It is unrelated to the blanket blocking discussion as it is a decision the business needs to decide if they need to make or not.
What's the difference between blocking DNS at the router vs firewall? The idea being only permitted DNS servers would be allowed to perform DNS requests to the outside world. Everything on the inside would need to use the on premis DNS servers (aka our DCs).
RIght, if you allow unmanaged devices onto your network, then it could make sense to use LAN security to control access to DNS. But I'd ask.. why do you let uncontrolled devices onto your network?
Basically how I see this is an attempt at LAN based security, while also allowing skipping LAN management for the worst of both worlds mixed together.
-
@scottalanmiller said in Firewalls & Restricting Outbound Traffic:
@anthonyh said in Firewalls & Restricting Outbound Traffic:
What's the difference between blocking DNS at the router vs firewall?
Those are the same thing. All routers on the market for the last two decades is a firewall. And all firewalls that I know of are routers. Since the late 1990s, while a router and firewall are different functions and aspects, all real world products are always both. So those terms are actually interchangeable unless you are discussing the functionality.
I know. Hence my question.
I suspect this thread is spiraling. As surprising as it may be, I'm really not an idiot.
-
@anthonyh said in Firewalls & Restricting Outbound Traffic:
@scottalanmiller said in Firewalls & Restricting Outbound Traffic:
@anthonyh said in Firewalls & Restricting Outbound Traffic:
What's the difference between blocking DNS at the router vs firewall?
Those are the same thing. All routers on the market for the last two decades is a firewall. And all firewalls that I know of are routers. Since the late 1990s, while a router and firewall are different functions and aspects, all real world products are always both. So those terms are actually interchangeable unless you are discussing the functionality.
I know. Hence my question.
I suspect this thread is spiraling. As surprising as it may be, I'm really not an idiot.
I don't understand the question, what prompted it?
-
@scottalanmiller said in Firewalls & Restricting Outbound Traffic:
@anthonyh said in Firewalls & Restricting Outbound Traffic:
@JaredBusch said in Firewalls & Restricting Outbound Traffic:
@scottalanmiller said in Firewalls & Restricting Outbound Traffic:
@anthonyh said in Firewalls & Restricting Outbound Traffic:
@JaredBusch said in Firewalls & Restricting Outbound Traffic:
@anthonyh said in Firewalls & Restricting Outbound Traffic:
Ok, so perhaps the discussion should be...which ports would you blanket block?
- That's it. And it is blocked on every network I have ever had access to the core router of.
You wouldn't want to force DNS at least, too? I'm liking the idea that DNS requests must be made by my DCs. Maybe it's not necessary.
Are there cases for that? Okay. But you already control that in other ways. So I'm unclear what benefit you think that this will provide since you are talking about malware, not your users. Does malware looking things up on your DC provide some value to you?
You cannot force client DNS 100% of the time to be what you want in a BYOD environment. If DNS control is a desire, blocking DNS at the router is the simpler method.
It is unrelated to the blanket blocking discussion as it is a decision the business needs to decide if they need to make or not.
What's the difference between blocking DNS at the router vs firewall? The idea being only permitted DNS servers would be allowed to perform DNS requests to the outside world. Everything on the inside would need to use the on premis DNS servers (aka our DCs).
RIght, if you allow unmanaged devices onto your network, then it could make sense to use LAN security to control access to DNS. But I'd ask.. why do you let uncontrolled devices onto your network?
Basically how I see this is an attempt at LAN based security, while also allowing skipping LAN management for the worst of both worlds mixed together.
Where did I say I let unmanaged devices onto my network? Any non-organization owned device is limited to our guest WLAN which is completely siloed from the rest of our network. The two never cross with exception of using the same physical network (different VLANs, NAT IPs, etc.). On our guest WLAN I couldn't care less...go to town do whatever you want with DNS.
-
@scottalanmiller said in Firewalls & Restricting Outbound Traffic:
@anthonyh said in Firewalls & Restricting Outbound Traffic:
@scottalanmiller said in Firewalls & Restricting Outbound Traffic:
@anthonyh said in Firewalls & Restricting Outbound Traffic:
What's the difference between blocking DNS at the router vs firewall?
Those are the same thing. All routers on the market for the last two decades is a firewall. And all firewalls that I know of are routers. Since the late 1990s, while a router and firewall are different functions and aspects, all real world products are always both. So those terms are actually interchangeable unless you are discussing the functionality.
I know. Hence my question.
I suspect this thread is spiraling. As surprising as it may be, I'm really not an idiot.
I don't understand the question, what prompted it?
This whole discussion has been about allowing/blocking outbound traffic at the firewall and it was mentioned that blocking at the "router" would be better. This is what prompted my question.
