3D Printed House
-
-
The electric could absolutely be laid, HVAC channels I suppose could even be built in using concrete rather than metal ducts.
Plumbing though... eh...
-
@DustinB3403 said in 3D Printed House:
The electric could absolutely be laid, HVAC channels I suppose could even be built in using concrete rather than metal ducts.
Plumbing though... eh...
All of that is doable today. It's enough harder than just making wall that apparently nobody wants to bother with it
-
@DustinB3403 said in 3D Printed House:
The electric could absolutely be laid, HVAC channels I suppose could even be built in using concrete rather than metal ducts.
Plumbing though... eh...
No, needs metal. Concrete would blow dust forever.
-
@travisdh1 said in 3D Printed House:
@DustinB3403 said in 3D Printed House:
The electric could absolutely be laid, HVAC channels I suppose could even be built in using concrete rather than metal ducts.
Plumbing though... eh...
All of that is doable today. It's enough harder than just making wall that apparently nobody wants to bother with it
I want it to lay the cables and pick out the furniture and paint the walls
-
@DustinB3403 said in 3D Printed House:
@stacksofplates this same printer can make a square or any shape needed.
True, but as the arm operates radially, the largest footprint for any length arm will be the full swing of the arm, and not its inscribed square. They already look pretty small.
-
@art_of_shred said in 3D Printed House:
@DustinB3403 said in 3D Printed House:
@stacksofplates this same printer can make a square or any shape needed.
True, but as the arm operates radially, the largest footprint for any length arm will be the full swing of the arm, and not its inscribed square. They already look pretty small.
I've seen proof of concepts with others that look more like dry dock cranes that do larger rectangles really well. But mobility is low, obviously. This one looks like you can put it on a truck and drive it from pad to pad.
-
@art_of_shred I looked up this unit a bit more last night, to make a bigger house, you just move the arm using the crane.
It can create the doorways etc and leave them open between wall sections.
Same thing if you wanted a taller house.
-
I wonder if bubble chain homes will have a surge in popularity as three or four circular bits get attached to one another.
-
@scottalanmiller said in 3D Printed House:
@art_of_shred said in 3D Printed House:
@DustinB3403 said in 3D Printed House:
@stacksofplates this same printer can make a square or any shape needed.
True, but as the arm operates radially, the largest footprint for any length arm will be the full swing of the arm, and not its inscribed square. They already look pretty small.
I've seen proof of concepts with others that look more like dry dock cranes that do larger rectangles really well. But mobility is low, obviously. This one looks like you can put it on a truck and drive it from pad to pad.
Yeah, it's certainly possible. This one looks like the budget "Habitat for Humanity" model.
-
@DustinB3403 said in 3D Printed House:
@art_of_shred I looked up this unit a bit more last night, to make a bigger house, you just move the arm using the crane.
It can create the doorways etc and leave them open between wall sections.
Same thing if you wanted a taller house.
Sure. You want an upstairs? Throw that bad boy on a stack of pallets and keep squirting cement!
-
-
@scottalanmiller said in 3D Printed House:
I wonder if bubble chain homes will have a surge in popularity as three or four circular bits get attached to one another.
You remember those concrete domes that were basically like paper mache over inflated pillows? There's one out in the Midwest somewhere painted to look like a psychedelic caterpillar, that's like 4 overlapping domes in a chain.
-
@art_of_shred said in 3D Printed House:
@scottalanmiller said in 3D Printed House:
@art_of_shred said in 3D Printed House:
@DustinB3403 said in 3D Printed House:
@stacksofplates this same printer can make a square or any shape needed.
True, but as the arm operates radially, the largest footprint for any length arm will be the full swing of the arm, and not its inscribed square. They already look pretty small.
I've seen proof of concepts with others that look more like dry dock cranes that do larger rectangles really well. But mobility is low, obviously. This one looks like you can put it on a truck and drive it from pad to pad.
Yeah, it's certainly possible. This one looks like the budget "Habitat for Humanity" model.
It's perfect, from what I see, for the third world. In Nica they do man made houses not unlike this but in little squares. This looks like it would do a larger footprint with a cooler design and more solid construction (although they do all cinder block so they are already really solid) with less transportation costs (cinder blocks have to be brought from somewhere.) I could totally see Central American housing developments being made with these.
-
-
@art_of_shred said in 3D Printed House:
@Minion-Queen said in 3D Printed House:
Uh oh, now the queen wants a castle...
You mean all us minions get to go live in the castle after it's built, right?
-
A lot of the excitement around this stuff is less the size and more the ability to explore designs that were impractical before.
-
@travisdh1 said in 3D Printed House:
@art_of_shred said in 3D Printed House:
@Minion-Queen said in 3D Printed House:
Uh oh, now the queen wants a castle...
You mean all us minions get to go live in the castle after it's built, right?
*starts packing bags*
-
If I recall correctly NASA and the private space companies are looking into this technology to build habitats on the moon and mars. The problem they keep running into is how do you get the raw materials there in a consistent manner.
-
@coliver said in 3D Printed House:
If I recall correctly NASA and the private space companies are looking into this technology to build habitats on the moon and mars. The problem they keep running into is how do you get the raw materials there in a consistent manner.
You have to figure out how to produce the raw resources on site... at least as much as possible.
