Linux: BtrFS
-
@msff-amman-Itofficer said in Linux: BtrFS:
I hear alot lately more about those filesystems, but as far as I recall ZFS requires alot of RAM as it the same with BTRFS?
No, and no. The need for a lot of RAM is specifically around ZFS if deduplication is turned on. Then it is 1GB per 1TB. Unless you are using that feature, ZFS has no noticeably increased RAM needs.
-
@msff-amman-Itofficer said in Linux: BtrFS:
and is this only when you need to configure RAID with it?
RAID uses very little RAM. Cache, would use a lot of RAM, though. But that is configurable.
-
@msff-amman-Itofficer said in Linux: BtrFS:
I head alot of people like them for the ability to snapshot,
This is one of the silliest things that people talk about. LVM2 has offered snapshots on Linux for two decades. We don't need BtrFS or ZFS for that functionality. It's very common to snapshot on Linux even without these filesystems. It's only because they both have the LVM layer built in that they have this. All filesystems can be snapshot.
-
@msff-amman-Itofficer said in Linux: BtrFS:
... imagine I will run KVM server ontop of BTRFS, will it makes sense to snapshot the volume ?
Did it make sense before with LVM and XFS? No, and the reason is because you can't snap outside of the VM because there isn't enough information to know if the data is quiesced. Snapping under the hood at the LVM2 or BtrFS layer would be the same as snapping on a SAN which, of course, can cause corruption. So we avoid that. We need the VM itself to have this done via the hypervisor.
-
@msff-amman-Itofficer said in Linux: BtrFS:
And yes I use Centos latest, I noticed they have switched to XFS even in the boot partition, does it support volume snapshots?
Yes, and no. Filesystems don't do snapshots, logical volume managers do. XFS used properly on LVM2 has always had snapshots. Just like EXT2, 3 & 4 have always supported. Or JFS. The filesystem can't block the snapping functionality, so no matter what you put on top of an LVM, even if it isn't a filesystem, can be snapped as the filesystem doesn't not need to grant permission for this operation.
-
If it's "Better File System", why not pronounce it better, rather than butter?
-
@BBigford said in Linux: BtrFS:
If it's "Better File System", why not pronounce it better, rather than butter?
I've never understood that either, and a few people do, but somehow "butter" became the de facto standard, even before it was available for general use. My only guess is that they did not want to come off as pretentious.
-
@scottalanmiller said in Linux: BtrFS:
@msff-amman-Itofficer said in Linux: BtrFS:
... imagine I will run KVM server ontop of BTRFS, will it makes sense to snapshot the volume ?
Did it make sense before with LVM and XFS? No, and the reason is because you can't snap outside of the VM because there isn't enough information to know if the data is quiesced. Snapping under the hood at the LVM2 or BtrFS layer would be the same as snapping on a SAN which, of course, can cause corruption. So we avoid that. We need the VM itself to have this done via the hypervisor.
I've specifically seen you recommend using LVM as a backup mechanism with KVM.
-
@stacksofplates said in Linux: BtrFS:
@scottalanmiller said in Linux: BtrFS:
@msff-amman-Itofficer said in Linux: BtrFS:
... imagine I will run KVM server ontop of BTRFS, will it makes sense to snapshot the volume ?
Did it make sense before with LVM and XFS? No, and the reason is because you can't snap outside of the VM because there isn't enough information to know if the data is quiesced. Snapping under the hood at the LVM2 or BtrFS layer would be the same as snapping on a SAN which, of course, can cause corruption. So we avoid that. We need the VM itself to have this done via the hypervisor.
I've specifically seen you recommend using LVM as a backup mechanism with KVM.
Have I recommended it, or have I recommended it within the context of taking image based backups?
-
@scottalanmiller said in Linux: BtrFS:
@stacksofplates said in Linux: BtrFS:
@scottalanmiller said in Linux: BtrFS:
@msff-amman-Itofficer said in Linux: BtrFS:
... imagine I will run KVM server ontop of BTRFS, will it makes sense to snapshot the volume ?
Did it make sense before with LVM and XFS? No, and the reason is because you can't snap outside of the VM because there isn't enough information to know if the data is quiesced. Snapping under the hood at the LVM2 or BtrFS layer would be the same as snapping on a SAN which, of course, can cause corruption. So we avoid that. We need the VM itself to have this done via the hypervisor.
I've specifically seen you recommend using LVM as a backup mechanism with KVM.
Have I recommended it, or have I recommended it within the context of taking image based backups?
That's what he was talking about above. Using BtrFS to take a snapshot of the volume, like using LVM to take a snapshot of the volume.
-
@stacksofplates said in Linux: BtrFS:
@scottalanmiller said in Linux: BtrFS:
@stacksofplates said in Linux: BtrFS:
@scottalanmiller said in Linux: BtrFS:
@msff-amman-Itofficer said in Linux: BtrFS:
... imagine I will run KVM server ontop of BTRFS, will it makes sense to snapshot the volume ?
Did it make sense before with LVM and XFS? No, and the reason is because you can't snap outside of the VM because there isn't enough information to know if the data is quiesced. Snapping under the hood at the LVM2 or BtrFS layer would be the same as snapping on a SAN which, of course, can cause corruption. So we avoid that. We need the VM itself to have this done via the hypervisor.
I've specifically seen you recommend using LVM as a backup mechanism with KVM.
Have I recommended it, or have I recommended it within the context of taking image based backups?
That's what he was talking about above. Using BtrFS to take a snapshot of the volume, like using LVM to take a snapshot of the volume.
Well yes, but what I mean is if someone asks "how do you take backups" I normally recommend an agent. If someone says "how do I snap images" I normally say LVM.
The difference is if the goal is to backup the system or if the question is "can KVM do image backups."
-
@scottalanmiller said in Linux: BtrFS:
@BBigford said in Linux: BtrFS:
If it's "Better File System", why not pronounce it better, rather than butter?
I've never understood that either, and a few people do, but somehow "butter" became the de facto standard, even before it was available for general use. My only guess is that they did not want to come off as pretentious.
Lol then pronounce it 'butter' and call it 'Butter File System'?
-
@BBigford said in Linux: BtrFS:
@scottalanmiller said in Linux: BtrFS:
@BBigford said in Linux: BtrFS:
If it's "Better File System", why not pronounce it better, rather than butter?
I've never understood that either, and a few people do, but somehow "butter" became the de facto standard, even before it was available for general use. My only guess is that they did not want to come off as pretentious.
Lol then pronounce it 'butter' and call it 'Butter File System'?
It is what it is, I just report the news
-
@scottalanmiller said in Linux: BtrFS:
@stacksofplates said in Linux: BtrFS:
@scottalanmiller said in Linux: BtrFS:
@stacksofplates said in Linux: BtrFS:
@scottalanmiller said in Linux: BtrFS:
@msff-amman-Itofficer said in Linux: BtrFS:
... imagine I will run KVM server ontop of BTRFS, will it makes sense to snapshot the volume ?
Did it make sense before with LVM and XFS? No, and the reason is because you can't snap outside of the VM because there isn't enough information to know if the data is quiesced. Snapping under the hood at the LVM2 or BtrFS layer would be the same as snapping on a SAN which, of course, can cause corruption. So we avoid that. We need the VM itself to have this done via the hypervisor.
I've specifically seen you recommend using LVM as a backup mechanism with KVM.
Have I recommended it, or have I recommended it within the context of taking image based backups?
That's what he was talking about above. Using BtrFS to take a snapshot of the volume, like using LVM to take a snapshot of the volume.
Well yes, but what I mean is if someone asks "how do you take backups" I normally recommend an agent. If someone says "how do I snap images" I normally say LVM.
The difference is if the goal is to backup the system or if the question is "can KVM do image backups."
I don't understand what this has to do with anything. Above you said
Did it make sense before with LVM and XFS? No, and the reason is because you can't snap outside of the VM because there isn't enough information to know if the data is quiesced.
It does make sense. You can easily suspend the VM and take a LV snapshot.
You've also said this to someone else which is what I was referring to:
Why are you not using logical volumes? that is both a general Linux best practice as well as the backup method for KVM.
Then you linked a python script that does exactly what I said. Suspends the VM and takes a snapshot of the logical volume.
My point is, why are you saying here that it makes no sense?
-
@stacksofplates said in Linux: BtrFS:
Did it make sense before with LVM and XFS? No, and the reason is because you can't snap outside of the VM because there isn't enough information to know if the data is quiesced.
It does make sense. You can easily suspend the VM and take a LV snapshot.
You've also said this to someone else which is what I was referring to:
Why are you not using logical volumes? that is both a general Linux best practice as well as the backup method for KVM.
Then you linked a python script that does exactly what I said. Suspends the VM and takes a snapshot of the logical volume.
My point is, why are you saying here that it makes no sense?
Does it? Who really feels that a "you have to shut down the host" backup method is generally valid? I think most companies would consider that a bit of a fail. Does it work? Sure. Does it make sense? Not really. Once you are shutting down the VM, just copy the files, no need to snap the whole underlying volume. Are there benefits to the snap? A little, but you are getting into a less than ideal zone here. I'm certainly not pushing that.
So did it make sense before, no. Does it change with BtrFS, no. Are there edge cases where you can make it work or it might make sense in niche cases? Yes, but not in general ones.
To someone else I was talking about the importance of having LVM and taking a snap inside Linux is quite different than taking one under it. And it is the backup method of KVM, which many people want. That it is there and that I recommend it are not related.
I feel that everything that you quoted from me is consistent. Different use cases. You have to read into it something that I didn't say to have a conflict. KVM has LVM as its snap / image backup method. I rarely would recommend using that. I would never consider running a production system without snap capacity, though. It is a best practice to keep LVM in Linux. Using snaps without quiescence as a backup system is not ideal regardless of if it is LVM or BtrFS, yes you can force quintessence by offlining the system, but I've not recommended that either, not outside of an emergency measure.
-
I think the gap here might be the difference between recommending having a capacity to use a mechanism versus recommending using that mechanism in a given manner.
-
@scottalanmiller said in Linux: BtrFS:
@stacksofplates said in Linux: BtrFS:
Did it make sense before with LVM and XFS? No, and the reason is because you can't snap outside of the VM because there isn't enough information to know if the data is quiesced.
It does make sense. You can easily suspend the VM and take a LV snapshot.
You've also said this to someone else which is what I was referring to:
Why are you not using logical volumes? that is both a general Linux best practice as well as the backup method for KVM.
Then you linked a python script that does exactly what I said. Suspends the VM and takes a snapshot of the logical volume.
My point is, why are you saying here that it makes no sense?
Does it? Who really feels that a "you have to shut down the host" backup method is generally valid? I think most companies would consider that a bit of a fail. Does it work? Sure. Does it make sense? Not really. Once you are shutting down the VM, just copy the files, no need to snap the whole underlying volume. Are there benefits to the snap? A little, but you are getting into a less than ideal zone here. I'm certainly not pushing that.
So did it make sense before, no. Does it change with BtrFS, no. Are there edge cases where you can make it work or it might make sense in niche cases? Yes, but not in general ones.
To someone else I was talking about the importance of having LVM and taking a snap inside Linux is quite different than taking one under it. And it is the backup method of KVM, which many people want. That it is there and that I recommend it are not related.
I feel that everything that you quoted from me is consistent. Different use cases. You have to read into it something that I didn't say to have a conflict. KVM has LVM as its snap / image backup method. I rarely would recommend using that. I would never consider running a production system without snap capacity, though. It is a best practice to keep LVM in Linux. Using snaps without quiescence as a backup system is not ideal regardless of if it is LVM or BtrFS, yes you can force quintessence by offlining the system, but I've not recommended that either, not outside of an emergency measure.
You're not "shutting down the host". It's suspended, completely different. It's perfectly valid because when you take an internal snapshot with a qcow2 file, it does exactly the same thing.
You were not talking about using internal snapshots at all. He was asking how to spin up a backup of a VM and you recommended using logical volume snapshots. Don't try to change what you said. It wasn't an inconsistent quote, you said exactly what I posted in the same manner we are talking about here.
-
@stacksofplates said in Linux: BtrFS:
You were not talking about using internal snapshots at all. He was asking how to spin up a backup of a VM and you recommended using logical volume snapshots. Don't try to change what you said. It wasn't an inconsistent quote, you said exactly what I posted in the same manner we are talking about here.
You only posted my portion of it, what's the whole thing?
-
@scottalanmiller said in Linux: BtrFS:
@stacksofplates said in Linux: BtrFS:
You were not talking about using internal snapshots at all. He was asking how to spin up a backup of a VM and you recommended using logical volume snapshots. Don't try to change what you said. It wasn't an inconsistent quote, you said exactly what I posted in the same manner we are talking about here.
You only posted my portion of it, what's the whole thing?
-
@stacksofplates said in Linux: BtrFS:
Why are you not using logical volumes? that is both a general Linux best practice as well as the backup method for KVM.
Here we go. Clearly I was responding to why it made no sense for him to be removing LVM. It in no way was a recommendation to use this as the backup. You changed the context.
It is the backup method for KVM. But I didn't recommend it, there. Also notice that this is FIVE years old. Half a decade. Saying that I'm inconsistent over half a decade is a bit extreme. I've leaned heavily away from image based backups over half a decade, but even back then when I normally recommended them, I didn't recommend it here.
