netdata 1.5 released - big update!
-
-
So it seems like you need to create a registry...
-
I still don't get where the dashboard is? is it hosted online? local? in the matrix??
-
@aaronstuder said in netdata 1.5 released - big update!:
@scottalanmiller said in netdata 1.5 released - big update!:
@aaronstuder said in netdata 1.5 released - big update!:
Keep in mind, this isn't just pretty charts, it has alarms too! One day when I was using bit torrent to download a bunch of Linux ISO's and mistakenly savings them to a small SSD drive, it gave me an alert that at the current data ingestion rate, my hard drive would be full in 5 hours! Very Cool
Seems like a neat product, just trying to figure out the best process for deployment.
I plan to install it on all my servers (I just have it on a few for testing right now) and then just setup nginx to point to the "main" netdata server for authentication and SSL.
But the individual machines will all still be exposed. Sending out the data from the individual machines to anything that asks for it. You could at least use the firewall to lock down to whom they will speak.
-
@hobbit666 Every server has it's own dashboard.
-
@aaronstuder said in netdata 1.5 released - big update!:
@hobbit666 Every server has it's own dashboard.
It's not centralized? Doesn't that defeat the purpose?
-
netdata provides distributed monitoring.
Traditional monitoring solutions centralize all the data to provide unified dashboards across all servers. Before netdata, this was the standard practice. However it has a few issues:
- due to the resources required, the number of metrics collected is limited.
- for the same reason, the data collection frequency is not that high, at best it will be once every 10 or 15 seconds, at worst every 5 or 10 mins.
- the central monitoring solution needs dedicated resources, thus becoming "another bottleneck" in the whole ecosystem. It also requires maintenance, administration, etc.
- most centralized monitoring solutions are usually only good for presenting statistics of past performance (i.e. cannot be used for real-time performance troubleshooting).
Netdata has a different approach:
- data collection happens per second
- thousands of metrics per server are collected
- data do not leave the server they are collected
- netdata servers do not talk to each other
- your browser connects all the netdata servers
Using netdata, your monitoring infrastructure is embedded on each server, limiting significantly the need of additional resources. netdata is blazingly fast, very resource efficient and utilizes server resources that already exist and are spare (on each server). This allows scaling out the monitoring infrastructure.
However, the netdata approach introduces a few new issues that need to be addressed, one being the list of netdata we have installed, i.e. the URLs our netdata servers are listening.
To solve this, netdata utilizes a central registry. This registry, together with certain browser features, allow netdata to provide unified cross server dashboards. For example, using the latest git version of netdata, when you jump from server to server using the my-netdata menu, several session settings (like the currently viewed charts, the current zoom and pan operations on the charts, etc) are propagated to the new server, so that the new dashboard will come with exactly the same view.
Found Here: https://github.com/firehol/netdata/wiki/mynetdata-menu-item
-
Yes, I've read that. It didn't explain why I'd this. It sounds like netdata is just "giving up" rather than providing a solution. It's just a nice, graphical top command? I've got that with top already. But is this getting me that I don't already have? Centralization is the key goal. THe last thing I want to do is have to expose and secure every machine individually, but a pain and risk. I guess I'm missing the "here is the good part" about it, other that the nice looking display.
I did see that you can tie this INTO a central system, but once you have that central system, what is the purpose of netdata?
-
How do I see my servers taht are not on the Internet, for example? Let's say I have 1,000 servers, how do I view them? The purpose of a central console is so that I have one place, one secured place, to go view them. If each machine has its own dashboard, I have to get every one of them out on the Internet so that I can view them?
-
@scottalanmiller said in netdata 1.5 released - big update!:
How do I see my servers that are not on the Internet, for example? Let's say I have 1,000 servers, how do I view them?
From the central registry.
-
@aaronstuder said in netdata 1.5 released - big update!:
@scottalanmiller said in netdata 1.5 released - big update!:
How do I see my servers that are not on the Internet, for example? Let's say I have 1,000 servers, how do I view them?
From the central registry.
So that acts like a proxy server? What does its interface look like?
-
@scottalanmiller said in netdata 1.5 released - big update!:
@aaronstuder said in netdata 1.5 released - big update!:
@scottalanmiller said in netdata 1.5 released - big update!:
How do I see my servers that are not on the Internet, for example? Let's say I have 1,000 servers, how do I view them?
From the central registry.
So that acts like a proxy server? What does its interface look like?
that's not the way I read it. The central registry appears to just be a list of what other machines you can 'surf' to.
-
@Dashrender thats correct
-
@aaronstuder said in netdata 1.5 released - big update!:
@Dashrender thats correct
But this doesn't answer Scott's question - If I'm at home, how do I access servers I won't want published to the internet?
-
@Dashrender said in netdata 1.5 released - big update!:
@aaronstuder said in netdata 1.5 released - big update!:
@Dashrender thats correct
But this doesn't answer Scott's question - If I'm at home, how do I access servers I won't want published to the internet?
SSH jumpbox?
-
@dafyre said in netdata 1.5 released - big update!:
@Dashrender said in netdata 1.5 released - big update!:
@aaronstuder said in netdata 1.5 released - big update!:
@Dashrender thats correct
But this doesn't answer Scott's question - If I'm at home, how do I access servers I won't want published to the internet?
SSH jumpbox?
sure, but that's outside the scope of the product/project, making the project just that much harder and less worth while.
As scott said, if you're already managing a central stat server, you gain your secure access to it, and it shows you everything for all servers, so what does this project do for you?
tracking those thousands of collection points is probably not needed in most production environments - if it was, then the company would probably have already solved that issue.
-
@aaronstuder said in netdata 1.5 released - big update!:
@Dashrender thats correct
So they would be blocked, right?
-
@scottalanmiller said in netdata 1.5 released - big update!:
How do I see my servers taht are not on the Internet, for example? Let's say I have 1,000 servers, how do I view them? The purpose of a central console is so that I have one place, one secured place, to go view them. If each machine has its own dashboard, I have to get every one of them out on the Internet so that I can view them?
I can't even think of 1 server (that I have) where I would this level and speed of real time data let alone 1,000. I know they are out there but I know I don't have any. SNMP and collectors give me way more info than I can use and allow for central monitoring. This seems like a super niche product that could have security implications.
-
@stacksofplates said in netdata 1.5 released - big update!:
@scottalanmiller said in netdata 1.5 released - big update!:
How do I see my servers taht are not on the Internet, for example? Let's say I have 1,000 servers, how do I view them? The purpose of a central console is so that I have one place, one secured place, to go view them. If each machine has its own dashboard, I have to get every one of them out on the Internet so that I can view them?
I can't even think of 1 server (that I have) where I would this level and speed of real time data let alone 1,000. I know they are out there but I know I don't have any. SNMP and collectors give me way more info than I can use and allow for central monitoring. This seems like a super niche product that could have security implications.
On Wall St. we needed this from time to time, but we wouldn't want it running or exposed normally. Very rare, even there, though. Only .1% of servers, literally. For normal needs, what we need is roughly:
- Centralized viewing
- Security
- Data collection away from the source device
- Historical viewing
-
@aaronstuder said in netdata 1.5 released - big update!:
@scottalanmiller said in netdata 1.5 released - big update!:
How do I see my servers that are not on the Internet, for example? Let's say I have 1,000 servers, how do I view them?
From the central registry.
So can anyone see my data? This is the point I don't get. Why would I want my servers uploading data to a "Dashboard" anyone can see.
I want to monitor my servers ..... just me.
