Dual-WAN Router Recommendations
-
I just started really playing with the ERX. Nice little box.
-
@scottalanmiller said in Dual-WAN Router Recommendations:
Ubiquiti EdgeRouter Lite, of course.
I am not opposed to Ubiquiti equipment, but I do need to know:
Does the router include a console cable, because as weird as it is, I don't own one?
Also, I've worked at the CLI with Cisco before but never with Ubiquiti. I'm not opposed to it, but is their documentation up to snuff so that I can do what I need to do? -
@thanksajdotcom said in Dual-WAN Router Recommendations:
@scottalanmiller said in Dual-WAN Router Recommendations:
Ubiquiti EdgeRouter Lite, of course.
I am not opposed to Ubiquiti equipment, but I do need to know:
Does the router include a console cable, because as weird as it is, I don't own one?
No, why do you care, though?
-
@thanksajdotcom said in Dual-WAN Router Recommendations:
Also, I've worked at the CLI with Cisco before but never with Ubiquiti. I'm not opposed to it, but is their documentation up to snuff so that I can do what I need to do?
Basically the same as the VyOS docs. I find it pretty easy to use.
-
@thanksajdotcom said in Dual-WAN Router Recommendations:
@scottalanmiller said in Dual-WAN Router Recommendations:
Ubiquiti EdgeRouter Lite, of course.
I am not opposed to Ubiquiti equipment, but I do need to know:
Does the router include a console cable, because as weird as it is, I don't own one?
Also, I've worked at the CLI with Cisco before but never with Ubiquiti. I'm not opposed to it, but is their documentation up to snuff so that I can do what I need to do?Neither of these should dissuade you from going with Ubiquiti. Not sure why you'd need a console cable though.
-
@coliver said in Dual-WAN Router Recommendations:
@thanksajdotcom said in Dual-WAN Router Recommendations:
@scottalanmiller said in Dual-WAN Router Recommendations:
Ubiquiti EdgeRouter Lite, of course.
I am not opposed to Ubiquiti equipment, but I do need to know:
Does the router include a console cable, because as weird as it is, I don't own one?
Also, I've worked at the CLI with Cisco before but never with Ubiquiti. I'm not opposed to it, but is their documentation up to snuff so that I can do what I need to do?Neither of these should dissuade you from going with Ubiquiti. Not sure why you'd need a console cable though.
Well I saw the console port. Does it have a web GUI to use? I'd assume it does but I wasn't sure.
-
@scottalanmiller said in Dual-WAN Router Recommendations:
Ubiquiti EdgeRouter Lite, of course.
Wouldn't the EdgeRouter X work here, as well?
-
@BRRABill said in Dual-WAN Router Recommendations:
@scottalanmiller said in Dual-WAN Router Recommendations:
Ubiquiti EdgeRouter Lite, of course.
Wouldn't the EdgeRouter X work here, as well?
Possibly better if you need more than 3 ports. I had to return my ER-X, and they didn't have any of them left in stock.... so I went home with an EdgeRouter PoE instead.
-
This post is deleted! -
@travisdh1 said in Dual-WAN Router Recommendations:
@BRRABill said in Dual-WAN Router Recommendations:
@scottalanmiller said in Dual-WAN Router Recommendations:
Ubiquiti EdgeRouter Lite, of course.
Wouldn't the EdgeRouter X work here, as well?
Possibly better if you need more than 3 ports. I had to return my ER-X, and they didn't have any of them left in stock.... so I went home with an EdgeRouter PoE instead.
Three should be fine. Two WAN ports and a port for an AP, and I'm good.
-
@BRRABill said in Dual-WAN Router Recommendations:
@scottalanmiller said in Dual-WAN Router Recommendations:
Ubiquiti EdgeRouter Lite, of course.
Wouldn't the EdgeRouter X work here, as well?
Yes, and it would save you money too.
-
The ER-X is less expensive than the ER-L.
More ports, less money, less CPU power I assume, but does have a Switch chip in it.
-
I always recommend the ER-X for home simply because of the onboard switch chip.
Config eth0 and eth1 for your dual WAN and then eth2, eth3, eth4 on switch0 with the AP plugged into eth4. You can even use the PoE injector for your AP to power the unit (assuming a Ubiquiti Unifi AP of some type) and still pass the PoE on to the AP.
Less of everything even a power cord
-
@JaredBusch said in Dual-WAN Router Recommendations:
I always recommend the ER-X for home simply because of the onboard switch chip.
Config eth0 and eth1 for your dual WAN and then eth2, eth3, eth4 on switch0 with the AP plugged into eth4. You can even use the PoE injector for your AP to power the unit (assuming a Ubiquiti Unifi AP of some type) and still pass the PoE on to the AP.
Less of everything even a power cord
This is my setup at home, and I love it
-
What are the use cases for the ERL at this point?
-
@BRRABill said in Dual-WAN Router Recommendations:
What are the use cases for the ERL at this point?
the ERL is is pure router. no switch chip. It also has slightly more power and more storage.
I use them a lot simply because they are already in place though.
Most branch offices would be an ER-X now.
The main office would be an ER-PoE. -
@JaredBusch said in Dual-WAN Router Recommendations:
@BRRABill said in Dual-WAN Router Recommendations:
What are the use cases for the ERL at this point?
the ERL is is pure router. no switch chip. It also has slightly more power and more storage.
I use them a lot simply because they are already in place though.
Most branch offices would be an ER-X now.
The main office would be an ER-PoE.I'm liking the ER-PoE at the house. Just being able to power Pro or Lite AP from the same box is really handy. Still just the one AC-PRO at the house tho.
-
Thanks guys. I will let you know how this goes, if I end up getting a second WAN connection, and I'll report back when that happens. I think the Ubiquiti equipment is sounding like the best bet though.
-
So update on this:
I will be starting at Spectrum/TWC/Charter one week from today. I know people who work there and the cost of them giving you internet and tv, etc is negligible. So the plan is to keep my current 100/100Mbps FiOS and then get whatever the highest level TWC connection I can and run both, considering one will be basically free. Just to be sure, the ER-X can be setup that way, correct? The plan is to get an ER-X, if that's the case, use 2/3 of the ports for WAN connections, and run the third port to an AP/switch I have running with dd-wrt.
Thanks,
A.J. -
@thanksajdotcom said in Dual-WAN Router Recommendations:
So update on this:
I will be starting at Spectrum/TWC/Charter one week from today. I know people who work there and the cost of them giving you internet and tv, etc is negligible. So the plan is to keep my current 100/100Mbps FiOS and then get whatever the highest level TWC connection I can and run both, considering one will be basically free. Just to be sure, the ER-X can be setup that way, correct? The plan is to get an ER-X, if that's the case, use 2/3 of the ports for WAN connections, and run the third port to an AP/switch I have running with dd-wrt.
Thanks,
A.J.At that point, I'd actually be looking at something a little faster than the ER-X as they're limited to 500mb/s routing. The ER X SFP or ER PoE both can do 1gb/s routing. That 500mb/s of routing is the only real drawback of the ER-X.
