BRRABill's Field Report With Linux
-
@BRRABill said in BRRABill's Field Report With Linux:
Linux QOTD (Question Of The Day)
My XO instance (Ubuntu 16.04) does not automatically grab an IP address on reboot.
How do I remedy that?
Do you want it to grab one (DHCP) or to have one (Static)?
-
@scottalanmiller said in BRRABill's Field Report With Linux:
@BRRABill said in BRRABill's Field Report With Linux:
Linux QOTD (Question Of The Day)
My XO instance (Ubuntu 16.04) does not automatically grab an IP address on reboot.
How do I remedy that?
Do you want it to grab one (DHCP) or to have one (Static)?
Grab one.
I've never actually had this issue. It has always grabbed one.
Not sure what happened to this instance.
Stupid Linux.
-
@BRRABill said in BRRABill's Field Report With Linux:
@scottalanmiller said in BRRABill's Field Report With Linux:
@BRRABill said in BRRABill's Field Report With Linux:
Linux QOTD (Question Of The Day)
My XO instance (Ubuntu 16.04) does not automatically grab an IP address on reboot.
How do I remedy that?
Do you want it to grab one (DHCP) or to have one (Static)?
Grab one.
I've never actually had this issue. It has always grabbed one.
Not sure what happened to this instance.
Stupid Linux.
Is the networking daemon starting when the system starts?
What's your /etc/network/interfaces file look like?
-
@stacksofplates said
Is the networking daemon starting when the system starts?
What's your /etc/network/interfaces file look like?
As a Linux noob, never been in that file before.
But after going into it, I immediately know (I think) what the issue was.
It has eth1 and ifconfig shows eth0.
Yep, that was it. More knowledge, mmmmmm!
# This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). source /etc/network/interfaces.d/* # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth1 iface eth1 inet dhcp ~ -
I think you mean
ip addr
ifconfigis old-hat, apparently. I still in habit of using ifconfig myself. -
@momurda said in BRRABill's Field Report With Linux:
I think you mean
ip addr
ifconfigis old-hat, apparently. I still in habit of using ifconfig myself.I started way back in the day of using ifconfig and just haven't broken out of it it.
Way back in the day meaning like July.
-
I'll likely keep typing it until it starts saying:
"Command not found, use ip addr, ya idjit"
-
@dafyre said in BRRABill's Field Report With Linux:
I'll likely keep typing it until it starts saying:
"Command not found, use ip addr, ya idjit"
You can fix that with an alias.
-
ifconfig is deal, long live ip addr
-
@scottalanmiller said in BRRABill's Field Report With Linux:
ifconfig is deal, long live ip a
FYFY - cause I'm lazy, and that's all I type out
-
@scottalanmiller said in BRRABill's Field Report With Linux:
@dafyre said in BRRABill's Field Report With Linux:
I'll likely keep typing it until it starts saying:
"Command not found, use ip addr, ya idjit"
You can fix that with an alias.
True. But at that point, I'd likely just sigh and type the correct command.
-
QOTD:
So I installed Ubuntu 16.10 yesterday to set up a Unifi cloud controller.
I followed some pretty simple directions here which had me "setup the iptables" firewall.
https://community.ubnt.com/t5/UniFi-Wireless/Step-by-Step-Walkthrough-Set-up-Unifi-Cloud-Controller-v-4-7-6/td-p/1324666But I have seen most articles reference ufw as the firewall in Ubuntu, a "front end" for iptables.
So, can someone explain what the heck these two things are? Are they two separate things that should not be used together?
ufw was installed but not enabled on my install. Is iptables enabled by default on fresh installs?
-
@BRRABill said in BRRABill's Field Report With Linux:
QOTD:
So I installed Ubuntu 16.10 yesterday to set up a Unifi cloud controller.
I followed some pretty simple directions here which had me "setup the iptables" firewall.
https://community.ubnt.com/t5/UniFi-Wireless/Step-by-Step-Walkthrough-Set-up-Unifi-Cloud-Controller-v-4-7-6/td-p/1324666But I have seen most articles reference ufw as the firewall in Ubuntu, a "front end" for iptables.
So, can someone explain what the heck these two things are? Are they two separate things that should not be used together?
ufw was installed but not enabled on my install. Is iptables enabled by default on fresh installs?
iptables is the user-space application to configure the tables kernel firewall. Almost every Linux based firewall app uses iptables in the background to do it's work. So this ufw is just another way to manage the firewall. Leave it to Ubuntu to do something odd.
I'd hope a firewall is enabled by default, that it's missing as default in CentOS7-1511 is super annoying.
-
@travisdh1 said in BRRABill's Field Report With Linux:
@BRRABill said in BRRABill's Field Report With Linux:
QOTD:
So I installed Ubuntu 16.10 yesterday to set up a Unifi cloud controller.
I followed some pretty simple directions here which had me "setup the iptables" firewall.
https://community.ubnt.com/t5/UniFi-Wireless/Step-by-Step-Walkthrough-Set-up-Unifi-Cloud-Controller-v-4-7-6/td-p/1324666But I have seen most articles reference ufw as the firewall in Ubuntu, a "front end" for iptables.
So, can someone explain what the heck these two things are? Are they two separate things that should not be used together?
ufw was installed but not enabled on my install. Is iptables enabled by default on fresh installs?
iptables is the user-space application to configure the tables kernel firewall. Almost every Linux based firewall app uses iptables in the background to do it's work. So this ufw is just another way to manage the firewall. Leave it to Ubuntu to do something odd.
I'd hope a firewall is enabled by default, that it's missing as default in CentOS7-1511 is super annoying.
The "odd" thing is that when I use ufw to list the rules in place (in iptables) nothing is listed.
Which makes me wonder if they are separate things...
-
@BRRABill said in BRRABill's Field Report With Linux:
@travisdh1 said in BRRABill's Field Report With Linux:
@BRRABill said in BRRABill's Field Report With Linux:
QOTD:
So I installed Ubuntu 16.10 yesterday to set up a Unifi cloud controller.
I followed some pretty simple directions here which had me "setup the iptables" firewall.
https://community.ubnt.com/t5/UniFi-Wireless/Step-by-Step-Walkthrough-Set-up-Unifi-Cloud-Controller-v-4-7-6/td-p/1324666But I have seen most articles reference ufw as the firewall in Ubuntu, a "front end" for iptables.
So, can someone explain what the heck these two things are? Are they two separate things that should not be used together?
ufw was installed but not enabled on my install. Is iptables enabled by default on fresh installs?
iptables is the user-space application to configure the tables kernel firewall. Almost every Linux based firewall app uses iptables in the background to do it's work. So this ufw is just another way to manage the firewall. Leave it to Ubuntu to do something odd.
I'd hope a firewall is enabled by default, that it's missing as default in CentOS7-1511 is super annoying.
The "odd" thing is that when I use ufw to list the rules in place (in iptables) nothing is listed.
Which makes me wonder if they are separate things...
Wait... Ubuntu.... and more crazy Ubuntu type things. I don't think they enable the firewall by default. They say "Just don't run a service you don't need." instead, don't they?
-
@travisdh1 said
Wait... Ubuntu.... and more crazy Ubuntu type things. I don't think they enable the firewall by default. They say "Just don't run a service you don't need." instead, don't they?
Well, that's part of m question as well.
From a little reading, it appears there is no firewall by default, because no ports are open.
But then all you have to do is add ports into iptables, and that enables it?
This is why I am confused.
-
@BRRABill said in BRRABill's Field Report With Linux:
@travisdh1 said
Wait... Ubuntu.... and more crazy Ubuntu type things. I don't think they enable the firewall by default. They say "Just don't run a service you don't need." instead, don't they?
Well, that's part of m question as well.
From a little reading, it appears there is no firewall by default, because no ports are open.
But then all you have to do is add ports into iptables, and that enables it?
This is why I am confused.
Nope. You want a web server on port 80, just install apache2. Done.
-
@BRRABill said in BRRABill's Field Report With Linux:
@travisdh1 said
Wait... Ubuntu.... and more crazy Ubuntu type things. I don't think they enable the firewall by default. They say "Just don't run a service you don't need." instead, don't they?
Well, that's part of m question as well.
From a little reading, it appears there is no firewall by default, because no ports are open.
But then all you have to do is add ports into iptables, and that enables it?
This is why I am confused.
No adding ports to iptables doesn't not enable it - you'd have to start the service that enables it, and then open the required ports (I suppose you could do it either one first, but if you don't enable the service, then there is no firewall running)
-
@Dashrender said i
No adding ports to iptables doesn't not enable it - you'd have to start the service that enables it, and then open the required ports (I suppose you could do it either one first, but if you don't enable the service, then there is no firewall running)
Are you sure about that?
iptables is just the interface to the firewall, which I think is always running.
Now, by default, it is allowing everything.
I set up another fresh droplet for testing, and this is what iptables -L gives me
Chain INPUT (policy ACCEPT) Chain FORWARD (policy ACCEPT) Chain OUTPUT (policy ACCEPT) -
yep, I'm sure IF the following is correct and the firewall is not enabled by default as mentioned below.
@travisdh1 said in BRRABill's Field Report With Linux:
Wait... Ubuntu.... and more crazy Ubuntu type things. I don't think they enable the firewall by default. They say "Just don't run a service you don't need." instead, don't they?
