Possible Refresh for Local Firehouse
-
@coliver said:
Is the firehouse independent or part of a town/municipality? Around here they are part of our local town and get support/maintenance from the town's IT specialists.
I honestly am not sure. I believe they're independent.
-
@Breffni-Potter said:
Why is the choice to go physical or virtual dependant on NTGs involvement?
Surely you'd want to go virtual yourself no?
Because something like powering on the VM would be too much for them. Virtualization would obviously be the preferred method, but if they don't want to have ongoing IT support, I can't keep helping them power on a VM, etc all the time. Thus why if they can't get NTG's ongoing support, they have to be able to do it themselves, ie going physical.
-
@Breffni-Potter said:
The guy you "talked to"
Does he have a budget in mind? You are leaping from what sounds like a very low budget legacy network to quite a high cost system by comparison. If you do all this work, will they just say, oh yeah too expensive, thanks but no thanks.
No budget was discussed as of yet.
-
@coliver said:
Are you working for NTG again? Why not just have them do the refresh and recommendations? Seems like going to them after the fact is not really the right way of doing it. You could potentially cost the firehouse a lot of money if NTG decides what you did wasn't the best thing available and has to redeploy.
Already been talking to @Minion-Queen about it. I will be going out at some point to do some preliminary work for setting up a printer. If the scope seems to be more than I feel comfortable with, even a little, I'll pass them on to NTG for everything right from the get-go. Otherwise, I'll do the refresh personally and then have NTG do ongoing support.
-
@handsofqwerty said:
@Breffni-Potter said:
Why is the choice to go physical or virtual dependant on NTGs involvement?
Surely you'd want to go virtual yourself no?
Because something like powering on the VM would be too much for them. Virtualization would obviously be the preferred method, but if they don't want to have ongoing IT support, I can't keep helping them power on a VM, etc all the time. Thus why if they can't get NTG's ongoing support, they have to be able to do it themselves, ie going physical.
Almost every virtualization solution allows you to start the VM when the server starts... it would be as simple as hitting the button to turn on the server.
-
@coliver said:
@handsofqwerty said:
@Breffni-Potter said:
Why is the choice to go physical or virtual dependant on NTGs involvement?
Surely you'd want to go virtual yourself no?
Because something like powering on the VM would be too much for them. Virtualization would obviously be the preferred method, but if they don't want to have ongoing IT support, I can't keep helping them power on a VM, etc all the time. Thus why if they can't get NTG's ongoing support, they have to be able to do it themselves, ie going physical.
Almost every virtualization solution allows you to start the VM when the server starts... it would be as simple as hitting the button to turn on the server.
I am not sure if you can set this in ESXi Free. I don't remember having it when I was using the Free but I can't confirm that.
-
@handsofqwerty said:
@coliver said:
@handsofqwerty said:
@Breffni-Potter said:
Why is the choice to go physical or virtual dependant on NTGs involvement?
Surely you'd want to go virtual yourself no?
Because something like powering on the VM would be too much for them. Virtualization would obviously be the preferred method, but if they don't want to have ongoing IT support, I can't keep helping them power on a VM, etc all the time. Thus why if they can't get NTG's ongoing support, they have to be able to do it themselves, ie going physical.
Almost every virtualization solution allows you to start the VM when the server starts... it would be as simple as hitting the button to turn on the server.
I am not sure if you can set this in ESXi Free. I don't remember having it when I was using the Free but I can't confirm that.
If it's possible, then that would be fine.
-
@handsofqwerty said:
@coliver said:
@handsofqwerty said:
@Breffni-Potter said:
Why is the choice to go physical or virtual dependant on NTGs involvement?
Surely you'd want to go virtual yourself no?
Because something like powering on the VM would be too much for them. Virtualization would obviously be the preferred method, but if they don't want to have ongoing IT support, I can't keep helping them power on a VM, etc all the time. Thus why if they can't get NTG's ongoing support, they have to be able to do it themselves, ie going physical.
Almost every virtualization solution allows you to start the VM when the server starts... it would be as simple as hitting the button to turn on the server.
I am not sure if you can set this in ESXi Free. I don't remember having it when I was using the Free but I can't confirm that.
Why limit yourself with ESXi free? Hyper-V has more features in the free platform without any of the restrictions.
-
First though would be to get an MFP/Copier under contract.
Secondly why uses ESXi free with so many limitations, if you need free hyper-v is a better option.
-
@coliver said:
@handsofqwerty said:
@coliver said:
@handsofqwerty said:
@Breffni-Potter said:
Why is the choice to go physical or virtual dependant on NTGs involvement?
Surely you'd want to go virtual yourself no?
Because something like powering on the VM would be too much for them. Virtualization would obviously be the preferred method, but if they don't want to have ongoing IT support, I can't keep helping them power on a VM, etc all the time. Thus why if they can't get NTG's ongoing support, they have to be able to do it themselves, ie going physical.
Almost every virtualization solution allows you to start the VM when the server starts... it would be as simple as hitting the button to turn on the server.
I am not sure if you can set this in ESXi Free. I don't remember having it when I was using the Free but I can't confirm that.
Why limit yourself with ESXi free? Hyper-V has more features in the free platform without any of the restrictions.
Ok, well that's an option. I assume this is where I'd get it from?
https://www.microsoft.com/en-us/evalcenter/evaluate-hyper-v-server-2012 -
@thecreativeone91 said:
First though would be to get an MFP/Copier under contract.
Secondly why uses ESXi free with so many limitations, if you need free hyper-v is a better option.
Again, it's something we can look into, but we'd have to see.
-
@handsofqwerty said:
@Breffni-Potter said:
Why is the choice to go physical or virtual dependant on NTGs involvement?
Surely you'd want to go virtual yourself no?
Because something like powering on the VM would be too much for them. Virtualization would obviously be the preferred method, but if they don't want to have ongoing IT support, I can't keep helping them power on a VM, etc all the time. Thus why if they can't get NTG's ongoing support, they have to be able to do it themselves, ie going physical.
Why would they need to power on a VM? If they can't do that, they need assistance all the time regardless of the solution.
-
@coliver said:
Why limit yourself with ESXi free? Hyper-V has more features in the free platform without any of the restrictions.
ESXi can't even work here. The Proliant MicroServer has no RAID so ESXi would have no way to do RAID. ESXi also can't do free backups. So you lose a lot. HyperV for sure on that hardware.
-
@scottalanmiller said:
@handsofqwerty said:
@Breffni-Potter said:
Why is the choice to go physical or virtual dependant on NTGs involvement?
Surely you'd want to go virtual yourself no?
Because something like powering on the VM would be too much for them. Virtualization would obviously be the preferred method, but if they don't want to have ongoing IT support, I can't keep helping them power on a VM, etc all the time. Thus why if they can't get NTG's ongoing support, they have to be able to do it themselves, ie going physical.
Why would they need to power on a VM? If they can't do that, they need assistance all the time regardless of the solution.
I'm not denying they need help period. I'm just saying that if the door system goes down and the VM doesn't auto-power-on, which if I can do that with Hyper-V then great, then they'd be in trouble.
-
@handsofqwerty said:
@coliver said:
@handsofqwerty said:
@coliver said:
@handsofqwerty said:
@Breffni-Potter said:
Why is the choice to go physical or virtual dependant on NTGs involvement?
Surely you'd want to go virtual yourself no?
Because something like powering on the VM would be too much for them. Virtualization would obviously be the preferred method, but if they don't want to have ongoing IT support, I can't keep helping them power on a VM, etc all the time. Thus why if they can't get NTG's ongoing support, they have to be able to do it themselves, ie going physical.
Almost every virtualization solution allows you to start the VM when the server starts... it would be as simple as hitting the button to turn on the server.
I am not sure if you can set this in ESXi Free. I don't remember having it when I was using the Free but I can't confirm that.
Why limit yourself with ESXi free? Hyper-V has more features in the free platform without any of the restrictions.
Ok, well that's an option. I assume this is where I'd get it from?
https://www.microsoft.com/en-us/evalcenter/evaluate-hyper-v-server-2012Do they have any windows server 2012 licenses you can uses that without taking up a seat of standard edition if the only roles is hyper-v and you get the GUI. the free version is a core install. Make sure you chose the hyper-v server https://www.microsoft.com/en-us/evalcenter/evaluate-hyper-v-server-2012-r2
-
@handsofqwerty said:
@coliver said:
@handsofqwerty said:
@coliver said:
@handsofqwerty said:
@Breffni-Potter said:
Why is the choice to go physical or virtual dependant on NTGs involvement?
Surely you'd want to go virtual yourself no?
Because something like powering on the VM would be too much for them. Virtualization would obviously be the preferred method, but if they don't want to have ongoing IT support, I can't keep helping them power on a VM, etc all the time. Thus why if they can't get NTG's ongoing support, they have to be able to do it themselves, ie going physical.
Almost every virtualization solution allows you to start the VM when the server starts... it would be as simple as hitting the button to turn on the server.
I am not sure if you can set this in ESXi Free. I don't remember having it when I was using the Free but I can't confirm that.
Why limit yourself with ESXi free? Hyper-V has more features in the free platform without any of the restrictions.
Ok, well that's an option. I assume this is where I'd get it from?
https://www.microsoft.com/en-us/evalcenter/evaluate-hyper-v-server-2012I don't follow.
Also make sure you aren't putting them on an old version.
https://www.microsoft.com/en-us/evalcenter/evaluate-hyper-v-server-2012-r2
-
@scottalanmiller said:
@coliver said:
Why limit yourself with ESXi free? Hyper-V has more features in the free platform without any of the restrictions.
ESXi can't even work here. The Proliant MicroServer has no RAID so ESXi would have no way to do RAID. ESXi also can't do free backups. So you lose a lot. HyperV for sure on that hardware.
Not sure what you mean by the Microserver having no RAID. You can do RAID on a Microserver. You just have a lot fewer drives you can use as opposed to a full-size server, tower or rack-mounted.
-
@scottalanmiller said:
@handsofqwerty said:
@coliver said:
@handsofqwerty said:
@coliver said:
@handsofqwerty said:
@Breffni-Potter said:
Why is the choice to go physical or virtual dependant on NTGs involvement?
Surely you'd want to go virtual yourself no?
Because something like powering on the VM would be too much for them. Virtualization would obviously be the preferred method, but if they don't want to have ongoing IT support, I can't keep helping them power on a VM, etc all the time. Thus why if they can't get NTG's ongoing support, they have to be able to do it themselves, ie going physical.
Almost every virtualization solution allows you to start the VM when the server starts... it would be as simple as hitting the button to turn on the server.
I am not sure if you can set this in ESXi Free. I don't remember having it when I was using the Free but I can't confirm that.
Why limit yourself with ESXi free? Hyper-V has more features in the free platform without any of the restrictions.
Ok, well that's an option. I assume this is where I'd get it from?
https://www.microsoft.com/en-us/evalcenter/evaluate-hyper-v-server-2012I don't follow.
Also make sure you aren't putting them on an old version.
https://www.microsoft.com/en-us/evalcenter/evaluate-hyper-v-server-2012-r2
Yeah, I'd put them on R2. That's why I was making sure I had the right link.
-
@scottalanmiller said:
@handsofqwerty said:
@Breffni-Potter said:
Why is the choice to go physical or virtual dependant on NTGs involvement?
Surely you'd want to go virtual yourself no?
Because something like powering on the VM would be too much for them. Virtualization would obviously be the preferred method, but if they don't want to have ongoing IT support, I can't keep helping them power on a VM, etc all the time. Thus why if they can't get NTG's ongoing support, they have to be able to do it themselves, ie going physical.
Why would they need to power on a VM? If they can't do that, they need assistance all the time regardless of the solution.
Or just have them auto power on. A restart due to failed services seems like something more likely to happen than to power on a VM.
-
Keep in mind doing this personally (especially if you don't have an LLC) you are taking a lot more personal liability than handing it over to @ntg
