Firewall Configuration in Linux in Centos 6.2
-
@scottalanmiller Whether a firewall can have IP address of Gateway.Whether it is possible to have?
-
@Lakshmana said:
@scottalanmiller Whether a firewall can have IP address of Gateway.Whether it is possible to have?
What are you asking? I'm not sure.
-
@Lakshmana said:
@scottalanmiller Whether a firewall can have IP address of Gateway.Whether it is possible to have?
No, firewalls are like filters. They have no concept of gateways or routes.
-
@scottalanmiller Ok I am having the WAN network as 192.168.1.0/24 and firewall in betwwen the LAN connection.What is the IP needs to be given to Firewall?
-
I don't understand. The firewall on Linux has no IP address or anything like that. Have you switched from talking about Linux to something completely different?
-
@scottalanmiller No I am talking about only in linux firewall
-
@Lakshmana said:
@scottalanmiller No I am talking about only in linux firewall
Then there is no need to talk IP addresses. Ports are all that you need to know.
-
@scottalanmiller
I have to assign IP for the VM machines I going to install.The requirements are 512 MB RAM,10 GB Hard disk and Centos minimal desktop.I have to use 3 NIC.That is One NIC for allowing WAN,one NIC for LAN and other for my VMmachine -
@Lakshmana said:
@scottalanmiller
I have to assign IP for the VM machines I going to install.The requirements are 512 MB RAM,10 GB Hard disk and Centos minimal desktop.I have to use 3 NIC.That is One NIC for allowing WAN,one NIC for LAN and other for my VMmachineYes, but the IP has nothing to do with the firewall. The firewall in Linux works off ports as a rule. You can restrict access to the machine from certain IP ranges, but the default is to either allow all IPs to a port or deny all.
-
@Lakshmana said:
@scottalanmiller
I have to assign IP for the VM machines I going to install.The requirements are 512 MB RAM,10 GB Hard disk and Centos minimal desktop.I have to use 3 NIC.That is One NIC for allowing WAN,one NIC for LAN and other for my VMmachineSure, but why are you connecting that to configuring the firewall? Setting up the basic networking and configuring the firewall are unrelated activities.
-
@scottalanmiller said:
@Lakshmana said:
@scottalanmiller
I have to assign IP for the VM machines I going to install.The requirements are 512 MB RAM,10 GB Hard disk and Centos minimal desktop.I have to use 3 NIC.That is One NIC for allowing WAN,one NIC for LAN and other for my VMmachineSure, but why are you connecting that to configuring the firewall? Setting up the basic networking and configuring the firewall are unrelated activities.
Wait are you configuring this machine as a VM Host or either a router/gateway device? Something seems odd.
-
I think that you should back up and talk to us about your goals, rather than getting stuck in small technical details. You are asking tiny questions that are very specific but are not telling us what you are trying to accomplish. So the information that we give you might be dangerous or wrong because you were not sure what question to ask.
You are skipping the steps that allow a community like this to help you help yourself. We need a bigger picture so that we can help with solutions before you get stuck or into a dangerous position.
-
-
@thecreativeone91 said:
http://community.spiceworks.com/topic/254525-asking-better-questions - Just Saying.
http://mangolassi.it/topic/306/asking-better-questions
We've had a local copy too for a long time
-
@scottalanmiller said:
I think that you should back up and talk to us about your goals, rather than getting stuck in small technical details. You are asking tiny questions that are very specific but are not telling us what you are trying to accomplish. So the information that we give you might be dangerous or wrong because you were not sure what question to ask.
You are skipping the steps that allow a community like this to help you help yourself. We need a bigger picture so that we can help with solutions before you get stuck or into a dangerous position.
I second this. You are so hung up on "how do I do this or that" that you are probably shooting yourself in the foot when it comes to the big picture.
-
@thanksajdotcom Ok Dont get angry.I will confirm my situation and after that I will ask my queries without confusing others
-
@Lakshmana said:
@thanksajdotcom Ok Dont get angry.I will confirm my situation and after that I will ask my queries without confusing others
I'm not angry. If you think this is anger, you've obviously never seen me get heated. Lol
No, but what we are trying to emphasize is that you need to think big picture, give us all the details of what the big picture goals are, and how you've gone about attacking the problem. Once we have the macro-level info, we can start helping you with the micro-level problems. But without the big picture, we could give you the right answers to the wrong questions.
-
@thanksajdotcom Ok I understood
-
How to block the SSH port in the IP table.I used the following command but it does not work?
My aim is that when I try to access the machine in Putty,the Centos machine should not be taken in the Putty/sbin/iptables -A INPUT -p tcp --destination-port {PORT-NUMBER-HERE} -j DROP
-
@Lakshmana said:
How to block the SSH port in the IP table.I used the following command but it does not work?
My aim is that when I try to access the machine in Putty,the Centos machine should not be taken in the Putty/sbin/iptables -A INPUT -p tcp --destination-port {PORT-NUMBER-HERE} -j DROP
I want to say this is missing something at the end but I might be wrong. IPTables isn't my specialty.
