HTS's Lab in Progress
-
A lab environment? I wish I had those luxuries!
It would be nice to play around with some VMs. I know that you can contact your Local Microsoft Evangelist (the ones who used to put on the local TechNets) and they'll set you up with something like 3 months of free Azure service and some special deal if you want to continue it. Just a thought for anyone, like myself, who does not have a budget for hardware and software. -
@Hubtech said:
OK so the iso is in my datastore. It's also mounted on this vm's vcdrom. now.....
I'd actually recommend just starting over with a new VM that is capable of running RHEL 64-bit (pretty sure that is how you must mark it in VMWare) and boot from the ISO. That is the easiest way to do it in my opinion.
-
@NetworkNerd said:
@Hubtech said:
OK so the iso is in my datastore. It's also mounted on this vm's vcdrom. now.....
I'd actually recommend just starting over with a new VM that is capable of running RHEL 64-bit (pretty sure that is how you must mark it in VMWare) and boot from the ISO. That is the easiest way to do it in my opinion.
Yes, 64bit Linux is all that is needed. Elastix CD handles the rest.
-
@David.Scammell said:
A lab environment? I wish I had those luxuries!
It would be nice to play around with some VMs. I know that you can contact your Local Microsoft Evangelist (the ones who used to put on the local TechNets) and they'll set you up with something like 3 months of free Azure service and some special deal if you want to continue it. Just a thought for anyone, like myself, who does not have a budget for hardware and software.david, hop on ebay you can get lab gear real cheap!
-
OK, elastix is setup. pretty painless.
Internal extension calling is setup and working, pretty painless.
dialing in from out and out from in....not working. i've got a trunk setup and in/out routes setup and assigned to extension...bah any advice?
-
@Hubtech said:
OK, elastix is setup. pretty painless.
Internal extension calling is setup and working, pretty painless.
dialing in from out and out from in....not working. i've got a trunk setup and in/out routes setup and assigned to extension...bah any advice?
When you say not working, can you be more specific? Is it 30 seconds and then the call dies, "all circuits are busy now," or something else entirely?
-
Check the FreePBX status screen or the Elastix status screen and make sure the trunk really is connected.
-
@NetworkNerd said:
@Hubtech said:
OK, elastix is setup. pretty painless.
Internal extension calling is setup and working, pretty painless.
dialing in from out and out from in....not working. i've got a trunk setup and in/out routes setup and assigned to extension...bah any advice?
When you say not working, can you be more specific? Is it 30 seconds and then the call dies, "all circuits are busy now," or something else entirely?
all circuits are busy now. in a very smooth voice
-
looks like it could be internet connectivity issue. though from the cli i can ping out via IP and domain name.
-
-
Likely trunks aren't working in both directions. Do you have a NAT firewall?
-
elastix is in dmz
-
OK, so i've now got connectivity but trunks still aren't connected correctly.
-
@Hubtech Who are you registering your trunks with and what settings are you using in your outgoing side? I might be able to provide some insight on that. I've been dealing with Elastix trunk settings very recently to the point where my head hurts lol
-
canreinvite=nonat
context=from-trunk
host=atlanta2.voip.ms
secret=*****
type=peer
username=***** -
@hubtech are you prepending the 1? You can do it either in the Trunk or the outbound route.
