Comparing MeshCentral 2 to ScreenConnect

Curtis

@scottalanmiller said in Comparing MeshCentral 2 to ScreenConnect:

This is what I have on a 19.04 install...

@scottalanmiller using Ubuntu

Scott

@smartkid808 I too had trouble with MC on Linux because I am not a regular Linux user.

scottalanmiller has helped me a great deal. The man has the patience of a saint.

smartkid808

@Scott said in Comparing MeshCentral 2 to ScreenConnect:

@smartkid808 I too had trouble with MC on Linux because I am not a regular Linux user.

scottalanmiller has helped me a great deal. The man has the patience of a saint.

Yes sir.. He sure is. and has been since I met him in SW. Hopefully I can get mines working again..lol

scottalanmiller

@smartkid808 said in Comparing MeshCentral 2 to ScreenConnect:

@scottalanmiller Hi scott, so this is what it pulls up.. sorry for being so dumb lol

This is weird folder structure for sure. Go into node_modules and run from there...

cd node_modules

smartkid808

@scottalanmiller said in Comparing MeshCentral 2 to ScreenConnect:

@smartkid808 said in Comparing MeshCentral 2 to ScreenConnect:

@scottalanmiller Hi scott, so this is what it pulls up.. sorry for being so dumb lol

This is weird folder structure for sure. Go into node_modules and run from there...
cd node_modules

Not sure if I did it right..

When I run as sudo

scottalanmiller

Do...

cd /home/wscheele/node_modules/

Then do

sudo npm install meshcentral

smartkid808

Hi Again Scott!..lol OK, did that, and it comes back

scottalanmiller

Is there much connected there yet? Honestly, I'd start over with a good install. You really don't want this running out of your home directory or as an end user. You want it installed by root under /opt.

Just do...

sudo -i su
cd /opt
npm install meshcentral

Stay out of end user land and home directories for all things involving MeshCentral.

smartkid808

@scottalanmiller said in Comparing MeshCentral 2 to ScreenConnect:

Honestly, I'd start over with a good install. You really don't want this running out of your home directory or as an end user. You want it installed by root under /opt.

I have a backup from the other week. I think I just put the user account since thats what the setup put me thru. Can't exactly remember.

do the above command after I reload Ubuntu?

Scott

@scottalanmiller I followed the MC install guide for Ubuntu and it read the following: "In all cases, MeshCentral must not be installed as root user. It’s not secure and the instructions below will not work correctly," which is why I installed in userland.

scottalanmiller

@Scott said in Comparing MeshCentral 2 to ScreenConnect:

@scottalanmiller I followed the MC install guide for Ubuntu and it read the following: "In all cases, MeshCentral must not be installed as root user. It’s not secure and the instructions below will not work correctly," which is why I installed in userland.

I see that it says that. That definitely conflicts with all of their other documentation, including further up in the document itself.

scottalanmiller

@Scott the Ubuntu instructions also aren't updated for the last two Ubuntu releases, and forget to have you make the directory. The "quick" instructions at the top of the document for all versions are way more complete and simple.

Also, I just realized, because you followed those Ubuntu directions instead of the generic ones, that's why you have less RAM available. You must have installed MongoDB. That will use a lot more resources because it is running a full database server which you really have no need for until you have many hundreds, possibly thousands, of end points to manage. It's not a problem, you are just set up for a much larger style of install than the basic default one, so it uses more RAM.

scottalanmiller

@Scott I used the NPM instructions on page 3 rather than the Ubuntu instructions.

Scott

Thank for the replies.

Yes, I have MongoDB in use. I intend to have many more clients than I am currently working with.

Do you recommend reinstalling and while I am at it maybe do it on Fedora? May I import existing clients or does that require reinstalling them?

I have also yet to set up Let's Encrypt.

scottalanmiller

This page...

https://www.meshcommander.com/meshcentral2/installation

Leads to this one for install instructions...

https://www.npmjs.com/package/meshcentral

scottalanmiller

@Scott said in Comparing MeshCentral 2 to ScreenConnect:

Do you recommend reinstalling and while I am at it maybe do it on Fedora? May I import existing clients or does that require reinstalling them?

I use Ubuntu, works great. I use 19.04, which is noticeably faster than 18.10.

scottalanmiller

@Scott said in Comparing MeshCentral 2 to ScreenConnect:

Yes, I have MongoDB in use. I intend to have many more clients than I am currently working with.

I've not found a point where MongoDB would be useful. The built in DB is screaming fast.

Ylian

@smartkid808 If you see this error:

Error: ENOENT: no such file or directory, open '/home/wscheele/views/layouts/main.handlebars'

This was due to a new version of express-handlebars 3.1.0 that broke MeshCentral. I released a new version of MeshCentral last night v0.3.4-k with a fix for this.

smartkid808

@Ylian said in Comparing MeshCentral 2 to ScreenConnect:

@smartkid808 If you see this error:
Error: ENOENT: no such file or directory, open '/home/wscheele/views/layouts/main.handlebars'
This was due to a new version of express-handlebars 3.1.0 that broke MeshCentral. I released a new version of MeshCentral last night v0.3.4-k with a fix for this.

Thanks Ylin, anyway to fix without complete wipe and reload? or would you recommend a wipe reload? I do have a backup from 2 weeks ago, and would only loose 1 client that was attached (if they are lost when restore is done).

smartkid808

@smartkid808 said in Comparing MeshCentral 2 to ScreenConnect:

@Ylian said in Comparing MeshCentral 2 to ScreenConnect:
@smartkid808 If you see this error:
Error: ENOENT: no such file or directory, open '/home/wscheele/views/layouts/main.handlebars'
This was due to a new version of express-handlebars 3.1.0 that broke MeshCentral. I released a new version of MeshCentral last night v0.3.4-k with a fix for this.
Thanks Ylin, anyway to fix without complete wipe and reload? or would you recommend a wipe reload? I do have a backup from 2 weeks ago, and would only loose 1 client that was attached (if they are lost when restore is done).

ok, I got it back up some how.. I updated linux by finding this (might not be right command)... Usually I just run apt-get update then upgrade every so often.

I think this is what I did

sudo apt-get update && sudo apt-get dist-upgrade

cd /home/wscheele/node_modules/

sudo npm install meshcentral

Still got odd errors, but tried to start it manually, and it started (it wasn't starting after server updates for some reason)

cd /home/wscheele/node_modules/

node meshcentral

Now to redo the auto start thing.. Hope I can figure this out again.. I prob did part of this if not all of this wrong. But I have no clue what I was doing and it's not production, so wasn't too worried.

I do also want to disable the create account thing.. I will look into that to I guess