Massive Throughput Loss On WiFi
-
Are you certain you're wifi is setup to use 5Ghz and not 2.4?
-
@DustinB3403
Oops - to be honest, I'm not sure - Would 2.4 Vs 5.0 Make that big a difference? Sorry, I haven't a massive amount of experience on WiFi and really appreciate your help . . . -
@JasonMinard said in Massive Throughput Loss On WiFi:
@DustinB3403
Oops - to be honest, I'm not sure - Would 2.4 Vs 5.0 Make that big a difference? Sorry, I haven't a massive amount of experience on WiFi and really appreciate your help . . .It would have a huge difference, yes.
-
This post is deleted! -
@JasonMinard said in Massive Throughput Loss On WiFi:
@DustinB3403
Oops - to be honest, I'm not sure - Would 2.4 Vs 5.0 Make that big a difference? Sorry, I haven't a massive amount of experience on WiFi and really appreciate your help . . .Make sure the 2.4 channel width is set to 20MhZ & 5G is 20 or 40 MhZ
Wide channel widths will affect speed as well.
-
It looks like the wifi client is only connecting at 802.11g or 802.11a (54Mbit). Is that client capable of 802.11n/ac and wider channel width?
-
How did you get your baseline measurement? Hook a laptop up to the copper?
Did you use the same cable as the one that is plugged into the Ubiquiti AC Pro?
If you did not, then wire your laptop into the same cable that the Ubiquiti AC Pro is wired to and test the speeds. I'm not sure if you need to unhook the power injector or not.
-
@marcinozga said in Massive Throughput Loss On WiFi:
It looks like the wifi client is only connecting at 802.11g or 802.11a (54Mbit). Is that client capable of 802.11n/ac and wider channel width?
That'll cause some issues for sure.
-
@dafyre
Definitely Same Cable . . . -
@JasonMinard said in Massive Throughput Loss On WiFi:
@dafyre
Definitely Same Cable . . .Can you see what speed your device is negotiating with the AP?
-
@dafyre said in Massive Throughput Loss On WiFi:
@JasonMinard said in Massive Throughput Loss On WiFi:
@dafyre
Definitely Same Cable . . .Can you see what speed your device is negotiating with the AP?
He could with his cell phone if he download WifiMan (from Ubiquiti)
-
If the client isn't connecting at N or AC, you won't get higher speeds. If the client hardware is capable, you can try modifying the adapter properties and forcing the preferred band.
Just an FYI - Whenever I see weird issues with Wifi affecting a single client, I usually find that the client is a Windows device that has been using sleep mode. Sleep causes speed issues and other weird issues like connecting not being able to connect to a VPN but no issues connecting to the internet.
