Solved MeshCentral LE production cert
-
I always run browsers in porn mode when testing. So I would assume there is no caching happening.
-
According to the MeshCentral2UserGuide-0.1.9.pdf, it may take a few minutes to a few hours.
-
@JaredBusch said in MeshCentral LE production cert:
While writing my guide, and rerunning things many times, I left the LE cert set to
"production": falseI changed it to true a while ago, but the cert has not yet updated to a valid cert.
Any idea how long this will take?
It took literally 2 minutes for me once I had worked out a couple issues (fixed in v0.2.6-e) with Yilanst
-
-
@JaredBusch Five minutes, tops.
-
@scottalanmiller said in MeshCentral LE production cert:
@JaredBusch Five minutes, tops.
Then mine is broke.. Still invalid this morning.
-
@JaredBusch said in MeshCentral LE production cert:
@scottalanmiller said in MeshCentral LE production cert:
@JaredBusch Five minutes, tops.
Then mine is broke.. Still invalid this morning.
Did it work in the non-production mode?
-
@scottalanmiller said in MeshCentral LE production cert:
@JaredBusch said in MeshCentral LE production cert:
@scottalanmiller said in MeshCentral LE production cert:
@JaredBusch Five minutes, tops.
Then mine is broke.. Still invalid this morning.
Did it work in the non-production mode?
Yes.
-
Oh weird, it was flawless transitioning for us. Did you let it restart on its own or did you manually restart the service?
-
@scottalanmiller said in MeshCentral LE production cert:
Oh weird, it was flawless transitioning for us. Did you let it restart on its own or did you manually restart the service?
You have to restart the service anytime you change a setting in the config file.
-
@JaredBusch said in MeshCentral LE production cert:
@scottalanmiller said in MeshCentral LE production cert:
Oh weird, it was flawless transitioning for us. Did you let it restart on its own or did you manually restart the service?
You have to restart the service anytime you change a setting in the config file.
You aren't supposed to have to. Or at least you weren't supposed to have to in the past. It was supposed to detect changes and reload on its own.
-
@scottalanmiller said in MeshCentral LE production cert:
@JaredBusch said in MeshCentral LE production cert:
@scottalanmiller said in MeshCentral LE production cert:
Oh weird, it was flawless transitioning for us. Did you let it restart on its own or did you manually restart the service?
You have to restart the service anytime you change a setting in the config file.
You aren't supposed to have to. Or at least you weren't supposed to have to in the past. It was supposed to detect changes and reload on its own.
Maybe I misread something in the guide.
-
@scottalanmiller said in MeshCentral LE production cert:
@JaredBusch said in MeshCentral LE production cert:
@scottalanmiller said in MeshCentral LE production cert:
Oh weird, it was flawless transitioning for us. Did you let it restart on its own or did you manually restart the service?
You have to restart the service anytime you change a setting in the config file.
You aren't supposed to have to. Or at least you weren't supposed to have to in the past. It was supposed to detect changes and reload on its own.
Did you try removing the letsencrypt folder prior to restarting for production mode? I had to do that too, along a couple other things that are now fixed.
-
@pmoncho said in MeshCentral LE production cert:
@scottalanmiller said in MeshCentral LE production cert:
@JaredBusch said in MeshCentral LE production cert:
@scottalanmiller said in MeshCentral LE production cert:
Oh weird, it was flawless transitioning for us. Did you let it restart on its own or did you manually restart the service?
You have to restart the service anytime you change a setting in the config file.
You aren't supposed to have to. Or at least you weren't supposed to have to in the past. It was supposed to detect changes and reload on its own.
Did you try removing the letsencrypt folder prior to restarting for production mode? I had to do that too, along a couple other things that are now fixed.
Doing that forced it to generate a new one.
-
@pmoncho said in MeshCentral LE production cert:
@scottalanmiller said in MeshCentral LE production cert:
@JaredBusch said in MeshCentral LE production cert:
@scottalanmiller said in MeshCentral LE production cert:
Oh weird, it was flawless transitioning for us. Did you let it restart on its own or did you manually restart the service?
You have to restart the service anytime you change a setting in the config file.
You aren't supposed to have to. Or at least you weren't supposed to have to in the past. It was supposed to detect changes and reload on its own.
Did you try removing the letsencrypt folder prior to restarting for production mode? I had to do that too, along a couple other things that are now fixed.
Yup, that's a requirement in the docs.
-
@JaredBusch said in MeshCentral LE production cert:
@pmoncho said in MeshCentral LE production cert:
@scottalanmiller said in MeshCentral LE production cert:
@JaredBusch said in MeshCentral LE production cert:
@scottalanmiller said in MeshCentral LE production cert:
Oh weird, it was flawless transitioning for us. Did you let it restart on its own or did you manually restart the service?
You have to restart the service anytime you change a setting in the config file.
You aren't supposed to have to. Or at least you weren't supposed to have to in the past. It was supposed to detect changes and reload on its own.
Did you try removing the letsencrypt folder prior to restarting for production mode? I had to do that too, along a couple other things that are now fixed.
Doing that forced it to generate a new one.
I missed that umpteen times in the docs, until I didn't.
-
@pmoncho said in MeshCentral LE production cert:
@scottalanmiller said in MeshCentral LE production cert:
@JaredBusch said in MeshCentral LE production cert:
@scottalanmiller said in MeshCentral LE production cert:
Oh weird, it was flawless transitioning for us. Did you let it restart on its own or did you manually restart the service?
You have to restart the service anytime you change a setting in the config file.
You aren't supposed to have to. Or at least you weren't supposed to have to in the past. It was supposed to detect changes and reload on its own.
Did you try removing the letsencrypt folder prior to restarting for production mode? I had to do that too, along a couple other things that are now fixed.
This was the fix??
-
@FATeknollogee said in MeshCentral LE production cert:
@pmoncho said in MeshCentral LE production cert:
@scottalanmiller said in MeshCentral LE production cert:
@JaredBusch said in MeshCentral LE production cert:
@scottalanmiller said in MeshCentral LE production cert:
Oh weird, it was flawless transitioning for us. Did you let it restart on its own or did you manually restart the service?
You have to restart the service anytime you change a setting in the config file.
You aren't supposed to have to. Or at least you weren't supposed to have to in the past. It was supposed to detect changes and reload on its own.
Did you try removing the letsencrypt folder prior to restarting for production mode? I had to do that too, along a couple other things that are now fixed.
This was the fix??
Yes.
-
@JaredBusch said in MeshCentral LE production cert:
@FATeknollogee said in MeshCentral LE production cert:
@pmoncho said in MeshCentral LE production cert:
@scottalanmiller said in MeshCentral LE production cert:
@JaredBusch said in MeshCentral LE production cert:
@scottalanmiller said in MeshCentral LE production cert:
Oh weird, it was flawless transitioning for us. Did you let it restart on its own or did you manually restart the service?
You have to restart the service anytime you change a setting in the config file.
You aren't supposed to have to. Or at least you weren't supposed to have to in the past. It was supposed to detect changes and reload on its own.
Did you try removing the letsencrypt folder prior to restarting for production mode? I had to do that too, along a couple other things that are now fixed.
This was the fix??
Yes.
:thumbs_up: :thumbs_up:
-
@scottalanmiller I have set all as described in manual. Port 80 is open port 444 for SLL is also open
letsdebug.net shows green. But no certificate is created. Is there any log?
BTW: i have windows installation
