Fedora 29 Server (or 28) install is stuck...?
-
@FATeknollogee said in Fedora 29 (or 28) install is stuck...?:
@DustinB3403 said in Fedora 29 (or 28) install is stuck...?:
@FATeknollogee said in Fedora 29 (or 28) install is stuck...?:
@DustinB3403 said in Fedora 29 (or 28) install is stuck...?:
I've seen this a few times, particularly with units that have nVidia GPU's where the drivers aren't installed.
I don't have a GPU.
The MB is a SM X10SDV-4C+-TLN4FHave you performed a hardware diag? Maybe your RAM or CPU is causing issues.
Not yet.
I'd go down that road first and at least perform a memory test to see if there are any issues.
-
Here are some troubleshooting steps provided by the Fedora Project.
-
@FATeknollogee are you attempting to install Server or Desktop on this board?
-
@DustinB3403 said in Fedora 29 (or 28) install is stuck...?:
@FATeknollogee are you attempting to install Server or Desktop on this board?
Server...my bad, I forgot to mention that.
-
@FATeknollogee So start with the basic troubleshooting. Confirm the checksums match, test the media (from the installation screen there), perform a memtest and other basic hardware troubleshooting steps.
This board isn't particularly old so I don't think you're having a compatibility issue.
-
@FATeknollogee I always use Rufus. I don't know if that could possibly be the issue or not but I have never had an issue with it before.
-
@FATeknollogee said in Fedora 29 Server (or 28) install is stuck...?:
@travisdh1 said in Fedora 29 (or 28) install is stuck...?:
@FATeknollogee Typically, I find a corrupted download borked the installer if it hangs at any point in the boot process when installing.
What it's doing right then specifically, I'm not sure. I could take a couple educated guesses, but they'd just be guesses.
I tried F29 and F28 iso's...same problem.
Maybe I should try burning the iso with Rufus instead of Fedora Media Writer?No, you are at a point where you know that the burn worked.
-
@FATeknollogee said in Fedora 29 Server (or 28) install is stuck...?:
X10SDV-4C+-TLN4F
SuperMicro only lists compatibility on that board to Fedora 23. But that's likely just because it is old.
https://www.supermicro.com/support/resources/OS/Broadwell-DE.cfm
-
This page is already the top hit for this issue with this motherboard.
-
There is a decent chance that the kernel that you have here is just too new. Might be worth going to CentOS for this hardware.
-
When things are hung, can you hit Ctrl+Alt-F2 and see if you can get to a console?
-
@scottalanmiller said in Fedora 29 Server (or 28) install is stuck...?:
@FATeknollogee said in Fedora 29 Server (or 28) install is stuck...?:
X10SDV-4C+-TLN4F
SuperMicro only lists compatibility on that board to Fedora 23. But that's likely just because it is old.
https://www.supermicro.com/support/resources/OS/Broadwell-DE.cfm
This board also supports Windows 10 so again I don't know if the issue is actually compatibility.
-
@DustinB3403 said in Fedora 29 Server (or 28) install is stuck...?:
@scottalanmiller said in Fedora 29 Server (or 28) install is stuck...?:
@FATeknollogee said in Fedora 29 Server (or 28) install is stuck...?:
X10SDV-4C+-TLN4F
SuperMicro only lists compatibility on that board to Fedora 23. But that's likely just because it is old.
https://www.supermicro.com/support/resources/OS/Broadwell-DE.cfm
This board also supports Windows 10 so again I don't know if the issue is actually compatibility.
Windows 10 isn't a version, though. It's a family. So like saying it supports Fedora, but not telling you which versions.
-
@scottalanmiller said in Fedora 29 Server (or 28) install is stuck...?:
@DustinB3403 said in Fedora 29 Server (or 28) install is stuck...?:
@scottalanmiller said in Fedora 29 Server (or 28) install is stuck...?:
@FATeknollogee said in Fedora 29 Server (or 28) install is stuck...?:
X10SDV-4C+-TLN4F
SuperMicro only lists compatibility on that board to Fedora 23. But that's likely just because it is old.
https://www.supermicro.com/support/resources/OS/Broadwell-DE.cfm
This board also supports Windows 10 so again I don't know if the issue is actually compatibility.
Windows 10 isn't a version, though. It's a family. So like saying it supports Fedora, but not telling you which versions.
So you have to assume it supports every version. Although lower down in the list it doesn't show support for F24 so yeah there is likely an issue of some kind.
-
@DustinB3403 said in Fedora 29 Server (or 28) install is stuck...?:
@scottalanmiller said in Fedora 29 Server (or 28) install is stuck...?:
@DustinB3403 said in Fedora 29 Server (or 28) install is stuck...?:
@scottalanmiller said in Fedora 29 Server (or 28) install is stuck...?:
@FATeknollogee said in Fedora 29 Server (or 28) install is stuck...?:
X10SDV-4C+-TLN4F
SuperMicro only lists compatibility on that board to Fedora 23. But that's likely just because it is old.
https://www.supermicro.com/support/resources/OS/Broadwell-DE.cfm
This board also supports Windows 10 so again I don't know if the issue is actually compatibility.
Windows 10 isn't a version, though. It's a family. So like saying it supports Fedora, but not telling you which versions.
So you have to assume it supports every version. Although lower down in the list it doesn't show support for F24 so yeah there is likely an issue of some kind.
But they don't list anything after F24, so there is also a very reasonable chance that they simple stopped testing some at F23 and others at F24. But who knows.
-
@scottalanmiller said in Fedora 29 Server (or 28) install is stuck...?:
@FATeknollogee said in Fedora 29 Server (or 28) install is stuck...?:
X10SDV-4C+-TLN4F
SuperMicro only lists compatibility on that board to Fedora 23. But that's likely just because it is old.
https://www.supermicro.com/support/resources/OS/Broadwell-DE.cfm
I've used the 6C version of this board with F28 & 29.
-
@scottalanmiller said in Fedora 29 Server (or 28) install is stuck...?:
When things are hung, can you hit Ctrl+Alt-F2 and see if you can get to a console?
Ok, let me try that!
-
@FATeknollogee said in Fedora 29 Server (or 28) install is stuck...?:
@scottalanmiller said in Fedora 29 Server (or 28) install is stuck...?:
@FATeknollogee said in Fedora 29 Server (or 28) install is stuck...?:
X10SDV-4C+-TLN4F
SuperMicro only lists compatibility on that board to Fedora 23. But that's likely just because it is old.
https://www.supermicro.com/support/resources/OS/Broadwell-DE.cfm
I've used the 6C version of this board with F28 & 29.
Actually, my prev response was incorrect. I've used the 6C board on oVirt.
-
Spoke to SM support, they said to open a ticket & include a screenshot.
-
I've seen similar hangs when installing over IPMI with virtual media attached. Is that how you installing it? There are also different boot options, I don't recall exact names, but I think it's something like UEFI CD-Rom and Legacy CD-Rom, legacy usually works.